OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
ZL3AI  > APRDIG   07.02.03 11:51l 273 Lines 9090 Bytes #999 (0) @ WW
BID : 845-ZL3AI
Read: GUEST
Subj: TAPR Digest, Feb 01, 4/5
Path: DB0FHN<DB0RGB<DB0SL<DB0FSG<DB0GAP<DB0GPP<DB0LX<DB0CZ<DB0GE<LX0PAC<
      LX0HST<HA3PG<HB9OK<IR0NET<VK3TE<ZL2BAU<ZL3VML
Sent: 030204/0927Z @:ZL3VML.#80.NZL.OC #:58791 [Chch-NZ] FBB7.00i $:845-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To  : APRDIG@WW

Subject: Opto isolators
From: Bob Bruninga <bruninga@usna.edu>
Date: Sat, 1 Feb 2003 11:35:47 -0500 (EST)
X-Message-Number: 24

Is any one well versed in the use of common optoisolators as linear
current sensors?

How linear are they?
Over what dynamic range?
How stable are they?

Thanks
Bob

----------------------------------------------------------------------

Subject: Re: Unproto path ?
From: Henk de Groot <henk.de.groot@hetnet.nl>
Date: Sat, 01 Feb 2003 18:00:52 +0100
X-Message-Number: 25

At 07:42 1-2-03 -0500, Bob Bruninga wrote:
>overloaded, then I would support the following algorithm in any new
>digipeater code:    (probably UI_DIGI or DIGI_NED already has it)...
>
>DXQRM filter for OVERLOADED local digis:
>
>  If WIDEX-Y packets are received by a digi and the difference between
>  X and Y is greater than or equal to "N" then ignore the packet.
>
>Let the local APRS community decide on the value of "N" for their local
>community.  Probably 2 in a very busy area.

For users that wat to experiment with this using DIGI_NED, just take out 
the rules you don't want. For example for WIDE7-n the rules are:

digipeat: all wide7-7 all swap0 wide7-6
digipeat: all wide7-6 all swap0 wide7-5
digipeat: all wide7-5 all swap0 wide7-4
digipeat: all wide7-4 all swap0 wide7-3
digipeat: all wide7-3 all swap0 wide7-2
digipeat: all wide7-2 all swap0 wide7-1
digipeat: all wide7-1 all swap wide7

If more that 3 hops are not wanted, just comment those out or delete them,
e.g.

digipeat: all wide7-7 all swap0 wide7-6
digipeat: all wide7-6 all swap0 wide7-5
digipeat: all wide7-5 all swap0 wide7-4
;digipeat: all wide7-4 all swap0 wide7-3
;digipeat: all wide7-3 all swap0 wide7-2
;digipeat: all wide7-2 all swap0 wide7-1
;digipeat: all wide7-1 all swap wide7

So WIDE7-4 or worse are not picked up anymore. Of course a surrounding digi 
may still act on WIDE7-4. For WIDE6-n to WIDE4-n do the same for those that 
are more than 3 hops.

There are two alternatives to this:

Alternative 1)
You can convert WIDE7-n to a lower hop-count, but of course that is more 
policeing the original packet than just ignore it. For example WIDE7-6 on 
input is send from the digi as WIDE3-1 (one hop was done on input, our digi 
is making the second hop and there is still 1 hop to go after that making 3 
hops in total).

Alternative 2)
On the last hop you allow you can set the "digipeated" flag; on the monitor 
normally visible with a "*" sign. To do that, at the last hop you allow 
change to operation, e.g:
original rule:
  digipeat: all wide7-5 all swap0 wide7-4
becomes:
  digipeat: all wide7-5 all swap wide7-4
On input WIDE7-5 is send out as WIDE7-4*. I don't know how other digis deal 
with this, but I think they will not touch this WIDE7-4 anymore (DIGI_NED 
for sure will not) its "used".

I don't know which one is the best option. I think Alternative 2 is the 
best since it does not distroy the used original and yet is stops the 
packet from generating QRM.

Kind regards,

Henk.

----------------------------------------------------------------------

Subject: Re: Routing question
From: Chris Rose <kb8uih2@chartermi.net>
Date: Sat, 01 Feb 2003 12:14:32 -0500
X-Message-Number: 26

Hello,
My question is to clarify what is meant by "there are closer digis in Fort
Collins that are also Igate capable"?

Are they indeed running I gates or not?  If they are, then I don't have a
clue for you.  If they are not, then that is why your packets are going 50
miles to a known I gate.

Sorry I can't be of any help,

Chris
KB8UIH

----------------------------------------------------------------------

Subject: Re:  Shuttle Lost update
<LYR27854-118386-2003.02.01-11.06.50--darnellb10#comcast.net@lists.tapr.org>
From: Brad Darnell <darnellb10@comcast.net>
Date: Sat, 01 Feb 2003 12:16:14 -0500
X-Message-Number: 27

According to the "talking heads", the airframe was certified for 100
missions. Far fewer than she had flown.

Brad - WA9BD

----------------------------------------------------------------------

Subject: Shuttle Radar images...
From: Jim Duncan <jdbandman@earthlink.net>
Date: Sat, 01 Feb 2003 11:16:42 -0600
X-Message-Number: 28

I'm compiling several EMails I've received from other sources
here....(Stan, forgive the temporary "off-topic")

    Look here http://www.vvm.com/~curtis/Convective.html  for a single
frame view of the debris on KGRK at 8:21am CST and as time permits later
today, I'll try to get a .gif loop posted to the same site.

Lon Curtis

P.S. KRLD radio in Dallas just talked to a reporter in downtown Nacogdoches
(deep East Texas) who said there is large metallic debris in the downtown
area there.

http://www.convectivetrends.net/020103-shuttle_path_kpoe.gif

http://www.convectivetrends.net/020103-shuttle_path_kpoe_echo_tops.gif

http://www.convectivetrends.net/020103-shuttle_path_kpoe_srvel_tilt4.gif

note on echo tops the decending altitudes

SHV is on clear air mode and shows the Bref image better.

http://convectivetrends.net/020103-shuttle_path_kshv_clear_air_mode.gif

=====
Blake Michaleski    KD5MWK
Baton Rouge, LA

-- 
73 de Jim, KU0G
Chairman/Coordinator
Kansas City APRS Working Group, W0APR
First Alert Storm Team KMBC-TV9
Mailto:ku0g@kcaprs.org
Webpage: http://www.kcaprs.org

----------------------------------------------------------------------

Subject: Re:  Shuttle Lost update
From: "Jack Smith" <jrs38801@bellsouth.net>
Date: Sat, 1 Feb 2003 11:19:54 -0600
X-Message-Number: 29

As far I can find out, that's right.  And probably is...  Considering it was
built using dinosaur technology, and the refurb in '99 still was using only
neolithic technology.

----------------------------------------------------------------------

Subject: Re: Unproto path ?
From: Bill Vodall - WA7NWP <wa7nwp@yahoo.com>
Date: Sat, 01 Feb 2003 09:26:05 -0800
X-Message-Number: 30

At 07:04 AM 2/1/03 -0500, Bob Bruninga wrote:

>Lets go back and also look at the QRM generated by the original path
>WIDE7-7,TRACE6-6.
>
>Lets assume that every digi hears 3 others (at least).  So one packet
>begets 3, begets 9, begets 27 or 3 to the Nth power for an N hop path.  So
>in a perfect APRS network that one packet would generate 1,594,323 (over a
>million) packets.  Again, not the kind of QRM we want on our local 1200
>baud APRS channel.
>
>Bob, WB4APR

The other side of the issue that prevents this "mutlilevel marketing packet
machine" from flooding the network each time a packet with a poorly crafted
path is launched is that ideally, each digi (that's smarter then a walnut)
will only rebroadcast the same packet once.   Thus for N digi's, you see at
most N packets.  Not N^N.

Things are pretty well configured in the Pacific Northwest these days.
Most folks running WIDE3-3 and many dropping to WIDE2-2.  From time to time
we have visitors showing up with excessive paths.  They are politely
requested to cut it back a bit.

Bill,  WA7NWP

----------------------------------------------------------------------

Subject: RE: APRS Symbols (versus Windows ICONS)..
From: Wolf Hoeller <wolf.hoeller@gmx.net>
Date: Sat, 1 Feb 2003 18:48:00 +0100
X-Message-Number: 31

Subject: RE: APRS Symbols (versus Windows ICONS)..
From: Bob Bruninga <bruninga@usna.edu>
Date: Tue, 28 Jan 2003 10:59:30 -0500 (EST)
X-Message-Number: 17

>On Tue, 28 Jan 2003, Juergen Frank wrote:
>
>>I strongly have to disagree to your statement about APRS in
>>Europe!
>
>Ah, this is good news.
>
>>How do you come to the opinion that it's used as a DX system
>>here?
>
>From the frequent posts I see here on the sig.  I can only go by
>what people tell us, and the last thread I saw on this issue
>about how APRS was used in Europe told us it was mostly used
>for DX and not public service, etc...

Bob,
basically there is a difference in using ham radio and especially packet
radio here in Europe! As I have posted some months ago here on the list in
Europe packet radio is used only for 'HAM' applications with no use for the
public! Due to our regulations we are not allowed to use ham-radio for
public services like in the US! Only the temporary use in the case of an
emergency we can use any ham-radio device for communication and
information!

>>I encourage everyone I see, sending long pathes in his/her
>>packets, to shorten them to make the network run better.
>>
>>Crazy path-definitions like WIDE7-7,TRACE7-7... Can be seen
>>anywhere in the world, mostly sent by unexperienced users!
>
>Yes, that is the problem..

As Juergen noted in a former posting mainly newcomers on APRS will have
such bad ui-path settings, because they want to be seen on the most
monitors throughout Europe. But some digisoftware (i.e. digi_ned) can
correct the path at the entry digi! After some information about the sense
of APRS and the need of the use of correct settings we - the digi sysops -
can help.

--
73 de Wolf, oe7ftj
ax25-mail: oe7ftj@oe7xlr.#oe7.aut.eu
email: oe7ftj(at)gmx.at
Have a look where I am: http://map.findu.com/oe7ftj-*

----------------------------------------------------------------------



Read previous mail | Read next mail


 16.11.2026 05:40:51lGo back Go up