| |
KB9MWR > PACKET 29.12.01 00:43l 78 Lines 2794 Bytes #999 (999) @ WW
BID : 40216KB9MWR
Read: GUEST
Subj: TAPR's 900 MHz FHSS radio (2)
Path: DB0MRW<DB0SON<DB0SIF<DB0GV<DB0GE<LX0PAC<LX0HST<HA3PG<WB0TAX<N5VDA<
N8DA<KB9BYQ<KB9ALN
Sent: 011228/2156z @:KB9ALN.#GRB.WI.USA.NOAM [[54304]] #:69464 $:40216kb9mwr
From:http://www.dandin.com/tdr900.html
900Mhz FHSS Internet Radio Project
Dandin has partnered with TAPR (Tucson Amateur Packet Radio) to develop
an Internet ISDN speed radio. The TDR-900 provides an ideal first-mile
Internet solution.
Design Objectives
1.Provide ~ISDN wireless throughput (128 kb/s - 512kb/s)
2.Support path length of 20 miles
3.TCP/IP Transparent Operations
4.Minimal disruption of existing users (902-926 MHz)
5.Provide a high degree of interference rejection (902-926 MHz)
6.Accommodate reasonable number of simultaneous users
7.Provide point-to-point and hub functions
8.Ethernet Interface to Computer with easy-to-configure user interface
TDR-900 Design Overview (pdf 620k)
Solutions for the First Mile User
The TDR-900 Radio, designed for networking flexibility, will provide a
first-mile Internet solution in a variety of scenarios. Some examples of
basic operational configurations are shown below.
User to User
The TDR-900 system allows one radio to talk to another radio, allowing
two computers or two computer networks to communicate over the radio
link. Simply plug your Ethernet connection into the TDR-900, configure
the radio, and you can talk to another system.
Bridging/Intelligent Routing
The TDR-900 system allows radios to bridge between multiple TDR-900
systems (mesh networking). In the example to the left, one TDR-900
bridges between two other systems. The TDR-900 supports an intelligent
bridging manager. This method allows small networks to be configured
quickly and simply. Intelligent bridging allows the TDR-900 to provide a
mesh networking approach to provide a moving network infrastructure. For
larger networks with more users the hub system is the best solution.
Hub System
The TDR-900 system can be configured to operate from a central hub of
radios. The example below shows a stack of TDR-900s at a central site
allowing access to many users. The number of TDR-900s managed at the
central site determines the number of connections possible. Users
connect and disconnect to the system as their need for internet access
is required. This is a prime solution for ISPs looking for scalable
wireless Internet connectivity. Add a backbone between multiple hub
sites and the number of users that can be supported increases
dramatically.
Technology Access
The TDR-900 is being developed for both commercial and amateur radio
deployment. Dandin will be handling the commercial interests in the
radio, with TAPR handling the amateur radio service.
The system has been designed so that the digital and RF board are
separate units. Additional bands for the radio are in development.
More information on technology availability and licensing will be
available once the technology transfer between TAPR and Dandin is
complete.
Read previous mail | Read next mail
| |