| |
KB9MWR > PACKET 29.12.01 00:41l 67 Lines 2129 Bytes #999 (999) @ WW
BID : 5412KB9MWR
Read: GUEST
Subj: TAPR 900 MHz radio alternative
Path: DB0MRW<DB0SON<DB0SIF<DB0GV<DB0GE<LX0PAC<LX0HST<HA3PG<WB0TAX<N5VDA<
N8DA<KB9BYQ<KB9ALN
Sent: 011228/2204z @:KB9ALN.#GRB.WI.USA.NOAM [[54304]] #:69465 $:5412kb9mwr
Here are my top reasons for using off the shelf Part 15 wireless ethernet
devices for Amateur Radio RF networking:
1.) They are fast, speeds in the 1-11 Mega-bit ranges.
2.) They already opperate on frequencies allocated to amateur radio.
3.) As is, under Part 15 they have proven to work for links 5-20 miles
4.) They are cheaper than a traditional ham packet setup.
5.) They use a proven sucessful network protocol, TCPIP.
6.) They use a modern modulation technique called Spread Spectrum
7). It will probably take decades for hams to come up with anything more
well suited for high speed RF networking.
See for yourself:
1.) All 2.4 GHz DSSS 802.11 is 11 Mbps with slower fall back rates.
http://hydra.carleton.ca/info/ (Pay no attention to the outdated prices
or advertised ranges)
2.) You have 3 bands to choose from 900 MHz, 2.4 & 5.7 GHz. (No re-rocking,
reprogramming needed!) Don't like microwave propagation? Legally to do any
significant speeds you really need to make use of the 900 MHz bands and up.
(if we fail to use these bands we will eventually loose the allocations)
Speed and or bandwidth constraints for data [97.307(f)(1)]
Frequency Range Speed Limit for Maximum Bandwidth for
Specified Codes Unspecified Codes
50.1 - 148 MHz 19.6 kilobauds 20 kHz
222 - 450 MHz 56 kilobauds 100 kHz
Above 902 MHz No speed limit No bandwidth limit
3.) Review what commercial ISP's have been doing.
http://isp-lists.isp-planet.com/isp-wireless/archives/
http://www.oreillynet.com/pub/a/wireless/2001/05/03/longshot.html
4.)
-Typical 1200/9600 Ham setup-
Paccomm Tiny 2 $150 + MFJ data radio $120 + 100ft RG-8/9913 $55 + Decent
Antenna $60 = TOTAL: $385
-Typical Wireless ethernet setup-
WLAN NIC/AP $150 + 100ft LMR-400 $65 + 24dB Parabolic $70 = TOTAL: $285
Note:
One could using AXIP to can carry existing AX.25 traffic over a wireless
ethernet link.
Find out more:
Using Part 15 Wireless Ethernet Devices For Amateur Radio:
http://www.qsl.net/kb9mwr/projects/wireless/plan.html
Read previous mail | Read next mail
| |