| |
ZL3AI > APRDIG 22.03.04 13:51l 220 Lines 6636 Bytes #999 (0) @ WW
BID : 3037-ZL3AI
Read: GUEST
Subj: TAPR Digest, Mar 19, 2/2
Path: DB0FHN<DB0FOR<DB0MRW<OK0PKL<DB0GRL<SR6BOX<SR7BBS<OM0PBC<OK0PCC<OK0NAG<
OK0PPL<DB0RES<ON0AR<ZL2TZE<ZL3VML
Sent: 040322/1111Z @:ZL3VML.#80.NZL.OC #:21254 [Chch-NZ] FBB7.00i $:3037-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: Re: Kantronic's Digi and Peet Bros WX (WAS: Weather data fo r k4rok-10)
From: Steve Dimse <k4hg@tapr.org>
Date: Fri, 19 Mar 2004 09:09:57 -0500
X-Message-Number: 10
On 3/18/04 at 2:14 PM Christensen, Eric <CHRISTENSENE@MAIL.ECU.EDU> sent:
>That is true... Looking at some data I am left scratching my head. Why
>isn't barometric pressure shown on my findU weather display??? I'm not
>seeing it for mine (KF4OTN-6) but is for Doug's (K4ROK) and Mike's
>(KB4TOH-11). As far as I know all three are setup the same.
It isn't showing, because you aren't sending it:
If you look at the serial data spec on Peet's web site, you'll see the
barometer is the 5th field:
$ULTW0000000001F602A0----000000000000----004D03F700000000
1 2 3 4 5 6
Most likely you need to calibrate the barometer...
Steve K4HG
----------------------------------------------------------------------
Subject: RE: Kantronic's Digi and Peet Bros WX (WAS: Weather data for k4rok-10)
From: "Daron J. Wilson" <daron@wilson.org>
Date: Fri, 19 Mar 2004 06:16:34 -0800
X-Message-Number: 11
Sorry, not yet. Thus far it is a couple of us batting a working
document back and forth trying to fill in the blanks. When it gets
closer, we'll probably see if there is any TAPR sponsorship available,
then produce a document and certainly post here.
73 N7HQR
Daron J. Wilson, RCDD ) )
Telecom Manager ( (
LH Morris Electric, Inc. ) )
(541) 265-8067 office _|****| mmm!
(541) 265-7652 fax ( | | coffee!
(541) 270-5886 cellular \| |
daron.wilson@lhmorris.com |____|
>-----Original Message-----
>From: Christensen, Eric [mailto:CHRISTENSENE@MAIL.ECU.EDU]
>
>Do you have a webpage or online documentation??? Sounds very
interesting...
----------------------------------------------------------------------
Subject: RE: Kantronic's Digi and Peet Bros WX (WAS: Weather dat a for k4rok-10)
From: "Christensen, Eric" <CHRISTENSENE@MAIL.ECU.EDU>
Date: Fri, 19 Mar 2004 09:21:19 -0500
X-Message-Number: 12
Outstanding!
-----Original Message-----
From: Daron J. Wilson [mailto:daron@wilson.org]
Sorry, not yet. Thus far it is a couple of us batting a working
document back and forth trying to fill in the blanks. When it gets
closer, we'll probably see if there is any TAPR sponsorship available,
then produce a document and certainly post here.
73 N7HQR
----------------------------------------------------------------------
Subject: RE: KF4OTN-6 Digi and Weather Station
From: "Christensen, Eric" <CHRISTENSENE@MAIL.ECU.EDU>
Date: Fri, 19 Mar 2004 09:38:44 -0500
X-Message-Number: 13
I see that now!!! Just curious, but would you have to reset the calibration
after a power failure to the box??? Anyone know? I thought everything was
set but I haven't looked that close since Isabel... :)
----------------------------------------------------------------------
Subject: RE: KF4OTN-6 Digi and Weather Station
From: Steve Dimse <k4hg@tapr.org>
Date: Fri, 19 Mar 2004 09:47:13 -0500
X-Message-Number: 14
On 3/19/04 at 9:38 AM Christensen, Eric <CHRISTENSENE@MAIL.ECU.EDU> sent:
>I see that now!!! Just curious, but would you have to reset the calibration
>after a power failure to the box??? Anyone know? I thought everything was
>set but I haven't looked that close since Isabel... :)
Yes, it needs to be reset after power failure.
Steve K4HG
----------------------------------------------------------------------
Subject: RE: KF4OTN-6 Digi and Weather Station
From: "Christensen, Eric" <CHRISTENSENE@MAIL.ECU.EDU>
Date: Fri, 19 Mar 2004 09:53:40 -0500
X-Message-Number: 15
WELL! I see a field trip coming... :)
Thanks Steve...
----------------------------------------------------------------------
Subject: Power Supply
From: "Sadowski, Allan" <allan.sadowski@ncshp.org>
Date: Fri, 19 Mar 2004 10:56:23 -0500
X-Message-Number: 16
I don know the small quantity cost, but for those folks here needing
better battery consumption for 5V and 12V power supplies (TNCs and
GPSs)... and a drop in replacement for 7805 and 7812 linears... you
might look at the Datel device.
Same form factor... elimination of some filter caps... reverse polarity
protection... and what appears to be pretty good efficiency.
http://www.datel.com/data/meters/dms-78xxsr.pdf
ALOHA
AH6LS
----------------------------------------------------------------------
Subject: Re: Power Supply
From: Derek Koonce <derek@dkoonce.com>
Date: Fri, 19 Mar 2004 08:22:58 -0800
X-Message-Number: 17
Not bad. However, what is the cost for this one?
Derek.
KE6JTP
Sadowski, Allan wrote:
>I don know the small quantity cost, but for those folks here needing
>better battery consumption for 5V and 12V power supplies (TNCs and
>GPSs)... and a drop in replacement for 7805 and 7812 linears... you
>might look at the Datel device.
>
>Same form factor... elimination of some filter caps... reverse polarity
>protection... and what appears to be pretty good efficiency.
>
>http://www.datel.com/data/meters/dms-78xxsr.pdf
>
>ALOHA
>AH6LS
----------------------------------------------------------------------
Subject: Re: Power Supply
From: Carl Taylor <carltt@bellsouth.net>
Date: Fri, 19 Mar 2004 11:59:40 -0500
X-Message-Number: 18
[commercial content deleted]
----------------------------------------------------------------------
Subject: Re: Power Supply
From: "J. Lance Cotton" <joe@lightningflash.net>
Date: Fri, 19 Mar 2004 11:12:03 -0600
X-Message-Number: 19
Also look at:
http://www-s.ti.com/sc/ds/pt5101.pdf
You can order a single quantity as a sample for free. I think these end up
being higher than the Datek model and are physically larger...
-Lance KJ5O
----------------------------------------------------------------------
Subject: Re: Spam:Re: Power Supply
From: <carltt@bellsouth.net>
Date: Fri, 19 Mar 2004 16:30:03 -0500
X-Message-Number: 20
I called the company....
>Where did you get the pricing info????
>
>ALOHA
>AH6LS
----------------------------------------------------------------------
Subject: RE: javAPRSSrvr 3.1b01 Released
From: "AE5PL Lists" <HamLists@ametx.com>
Date: Fri, 19 Mar 2004 19:53:53 -0600
X-Message-Number: 21
For those of you interested in javAPRSSrvr, the javAPRSSrvr group is
closed to reduce spam and keep the files under distribution control. If
you wish to install javAPRSSrvr, please contact me directly (off-SIG) at
pete@ae5pl.net. In brief, javAPRSSrvr is a Java Internet-only server,
with no GUI, and it is not an IGate.
73,
Pete Loveall AE5PL
pete@ae5pl.net
---
END OF DIGEST
Read previous mail | Read next mail
| |
