| |
ZL3AI > APRDIG 02.03.04 13:07l 52 Lines 1861 Bytes #999 (0) @ WW
BID : 2937-ZL3AI
Read: GUEST
Subj: TAPR Digest, Feb 29, 2/2
Path: DB0FHN<DB0RGB<OK0PPL<DB0RES<ON0AR<7M3TJZ<JE7YGF<LU6DTS<ZL2TZE<ZL3VML
Sent: 040302/1052Z @:ZL3VML.#80.NZL.OC #:20225 [Chch-NZ] FBB7.00i $:2937-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: TinyTrak3 version 1.1 Now Available at New Lower Price
From: "Byon Garrabrant" <byon@byon.com>
Date: Sun, 29 Feb 2004 20:52:18 -0800
X-Message-Number: 10
I am pleased to announce that TinyTrak3 v1.1 is now available at
http://www.byonics.com/tinytrak ! This new version sports the
follwing new features:
- 300 Baud output for HF packet. Uses tones 1600 Hz and 1800 Hz.
- NMEA output. Now, in addition to MIC-E and APRS text out, you can
output in NMEA $GPRMC format. The following is an example output:
$GPRMC,201050,A,3610.9912,N,11516.4034,W,000,005,240799,,*0B This may
allow use with some commercial software, such as Fugawi.
- Higher position resolution. With NMEA output, I am able to increase
position resolution 100X (2 more digits on each axis) assuming the
GPS supports it.
- Remove CQ destination. CQ is no longer used as a dest callsign.
It has been replaces with APT311 (APRS TinyTrak3 version 1.1)
- Separate Status text. Due to problems with status text not showing
up at findu.com, there is now an option to send you status text as a
separate packet (immeadiately after the position), rather than being
appended to the end of the position packet.
- Config support for COM ports up to COM8.
A existing TinyTrak3, TinyTrakII, or TinyTrak can be upgraded to this
new version by replacing the old chip with a new TinyTrak3 v1.1 chip.
With this new version, I have decided to lower TinyTrak3 prices!
Kits are now $xx, Kits with cases are now $xx, Built and Tested
TinyTrak3s are $xx or $xx with a case, and built gender changer /
null modem adapters are now $x.
Thanks to all my TinyTrak3 v1.1 beta testers, and all other users of
TinyTrak3 for your continued support!
Byon, N6BG
P.S. A surface mount TinyTrak3 is coming soon! 1" X 1" at 0.1 ounce.
---
END OF DIGEST
Read previous mail | Read next mail
| |
