| |
ZL3AI > APRDIG 21.12.03 10:40l 102 Lines 3294 Bytes #999 (0) @ WW
BID : 2529-ZL3AI
Read: GUEST
Subj: TAPR Digest, Dec 18, 3/3
Path: DB0FHN<DB0FOR<DB0SIF<DB0FSG<DB0RGB<OE5XBL<OE3XSR<OK0PBX<OK0PAD<OK0PPL<
DB0RES<ON0AR<ZL2BAU<ZL2BAU<ZL3VML
Sent: 031221/0816Z @:ZL3VML.#80.NZL.OC #:15043 [Chch-NZ] FBB7.00i $:2529-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: Re: Holiday Traveling = 144.39 CTCSS 100
From: "Richard Amirault" <ramirault@erols.com>
Date: Thu, 18 Dec 2003 22:35:17 -0500
X-Message-Number: 20
Hmmm.. isn't that the same thing (CTCSS & PL)?? I think you meant to say
"...when set to transmit a tone of 100 are also set to receive a tone of
100" By the way, would this setup stop non-PL tone sigs from being
received/digied?
Anyway....I do believe you may be mistaken, Bob. While I know that *most*
rigs operate this way, I'm fairly sure that there are some that *can* be set
for seperate tones on Xmit & Rcv (or tone on one and not the other) .. but I
can't give any examples off the top of my head.
Richard Amirault N1JDU Boston,
MA, USA
www.erols.com/ramirault "Go Fly A Kite"
----- Original Message -----
From: "Bob Bruninga" <bruninga@usna.edu>
Subject: [aprssig] Re: Holiday Traveling = 144.39 CTCSS 100
(snip)
>I too would like to monitor at home on CTCSS-100 in the shack to pick up
>any passers'by, BUT you cannot do this with a PACKET RIG!!!!!!!!!! because
>all radios when set to CTCSS 100 also set PL to 100.
(snip)
----------------------------------------------------------------------
Subject: Re: Holiday Traveling = 144.39 CTCSS 100
From: "Sean \\The RIMBoy\\" <sean@rimboy.com>
Date: Thu, 18 Dec 2003 21:31:01 -0600 (CST)
X-Message-Number: 21
On Thu, 18 Dec 2003, Richard Amirault wrote:
>Anyway....I do believe you may be mistaken, Bob. While I know that *most*
>rigs operate this way, I'm fairly sure that there are some that *can* be set
>for seperate tones on Xmit & Rcv (or tone on one and not the other) .. but I
>can't give any examples off the top of my head.
D700 for starters and I believe the F6A too. Don't know why you'd want to
do that, but I'm sure someone has a good reason.
Sean...
--
The punk rock will get you if the government don't get you first.
--Old 97's
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
KG4NRC http://www.rimboy.com Your source for the crap you know you need.
----------------------------------------------------------------------
Subject: Re: SPLIT pl TONES
From: Richard Garcia <k4gps@bellsouth.net>
Date: 18 Dec 2003 23:02:51 -0500
X-Message-Number: 22
The Icom W32A HT does and I think 99% of any of the commercial PC
programable radios.
Rich
----------------------------------------------------------------------
Subject: Re: APRS programs for a Dell Axim
From: manuel holland <wa5vxi@yahoo.com>
Date: Thu, 18 Dec 2003 20:15:24 -0800 (PST)
X-Message-Number: 23
just as important as the software for the Dell AXIUM, how can it be
connected to a tnc. I have not run across a serial cable for it.
Thanks in advance
----------------------------------------------------------------------
Subject: RE: Satellite Users Filter on APRS-IS
From: "AE5PL Lists" <HamLists@ametx.com>
Date: Thu, 18 Dec 2003 22:28:58 -0600
X-Message-Number: 24
You can connect to port 14580 on javAPRSSrvr servers and use the d
filter. For instance, d/PCSAT-1 would show packets where PCSAT-1* is in
the header. Multiple digis can be defined in the d filter
(d/digi-1/digi-2).
73,
Pete Loveall AE5PL
www.ae5pl.net
---
END OF DIGEST
Read previous mail | Read next mail
| |
