| |
ZL3AI > APRDIG 26.10.03 15:40l 96 Lines 2916 Bytes #999 (0) @ WW
BID : 2210-ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 24, 4/4
Path: DB0FHN<DB0THA<DB0ERF<DB0SON<DB0MRW<DB0RGB<OK0PPL<DB0RES<ON0AR<EB2BJX<
ED1ZAC<ZL2TZE<ZL3VML
Sent: 031026/1242Z @:ZL3VML.#80.NZL.OC #:11291 [Chch-NZ] FBB7.00i $:2210-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: Re: A Low-Tech APRSteward Proposal [was: SMART digi paths]
From: "Jack R. Smith" <jack.smith2@us.army.mil>
Date: Fri, 24 Oct 2003 18:36:34 -0500
X-Message-Number: 34
As do I. Let's stick with the E-Mail route. Education plus that should
work on 90% of the QRM, and the other
10% will just have to be done some other way. Snail mail, face-to-face, or
software algorithms, in descending order of preference.
Jack KE4LWT
----------------------------------------------------------------------
Subject: Re: WXTrak
From: John Mc Hugh <johnk.mchugh@worldnet.att.net>
Date: Fri, 24 Oct 2003 22:10:58 -0400
X-Message-Number: 35
Scott Miller wrote:
>Anyone used the Byonics WXTrak?
Scott,
I've just completed one year of continuous operation with a beta version
of the WXTrak and a Peet U2000. It has worked flawlessly, I highly
recommend it, it's simple to setup, cheap, easy to assemble and very
effective.
Checkout KU4GY-6
John
--
John Mc Hugh, KU4GY
Coordinator for Amateur Radio
National Hurricane Center, WX4NHC
Home page:- http://www.wx4nhc.org
----------------------------------------------------------------------
Subject: ahubswe.net
From: Robbie WA9INF <mwrobertson@comcast.net>
Date: Fri, 24 Oct 2003 21:24:00 -0500
X-Message-Number: 36
Is it something with me or the sever? Being refused on all ports..
Robbie
----------------------------------------------------------------------
Subject: RE: WXTrak
From: "Scott Miller" <scott@3xf.com>
Date: Fri, 24 Oct 2003 19:30:55 -0700
X-Message-Number: 37
Thanks, that's just what I wanted to hear. Once it supports the 1-wire
station, I'll probably make that my standard config for the ultralight
flight areas around here. Can't get much cheaper than that.
The OpenTracker might one day support the weather stations as well, but
that's not high on my list right now. Development's delayed a bit again due
to the fact that I made a boneheaded mistake in my last parts order - got 10
of the wrong frequency crystal, so prototype C is inoperative. Back to
software debugging on prototype B for now...
On that subject, does anyone know why TTL oscillators draw so much power?
The unit on prototype B is rated at something like 15 ma, which is as much
as the MCU itself draws. Fine for debugging, but too power hungry for the
production version.
Scott
----------------------------------------------------------------------
Subject: RE: WINAPRS Problem [ADDITIONAL INFO]
From: "Dave Sloan" <desloan@earthlink.net>
Date: Fri, 24 Oct 2003 21:59:01 -0600
X-Message-Number: 38
Hi all,
Well I'm back on APRS again. I rebooted and started my BUXTERM2 program
and it worked on 145.090 with out any problems. I then rebooted again and
started APRS and it is now working. I forgot to say in my other posts that I
could transmit but just not receive!
Tnx & 73,
Dave N0EOP
---
END OF DIGEST
Read previous mail | Read next mail
| |
