| |
ZL3AI > APRDIG 16.10.03 14:11l 50 Lines 1551 Bytes #999 (0) @ WW
BID : 2155-ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 14, 2/2
Path: DB0FHN<DB0RGB<DB0MRW<OK0PKL<OK0PPL<DB0RES<ON0AR<ZL2BAU<ZL2BAU<ZL3VML
Sent: 031016/1232Z @:ZL3VML.#80.NZL.OC #:10563 [Chch-NZ] FBB7.00i $:2155-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: Re: APRSdos and HP100 or HP200 palmtop
From: isobar@bcpl.net
Date: Tue, 14 Oct 2003 21:35:39 -0400
X-Message-Number: 12
At 01:03 PM 10/14/03 -0700, Daron J. Wilson wrote:
>Anyone try this combination successfully? I hated to sell my old HP200
>because it had a real live PCMCIA slot AND a serial port. Now I'm
>thinking it might be an affordable portable solution.
Sure; I've used APRSDOS with both an HP100 & HP200LX. I used a PCMCIA
serial card as a second serial port and avoid the port sharing problem, but
that meant I was limited to the HP's rather limited memory. But it worked.
Now I use it with a Kenwood D7-A HT which is a nice combination,
eliminating the need for the second serial port and so I can fill the
PCMCIA slot with a big memory card.
Works fine, but slow map changes. Stay local.
Bob Kirk
N3OZB
----------------------------------------------------------------------
Subject: Re: APRSdos and HP100 or HP200 palmtop
From: Reid Crowe <kc0idi@yahoo.com>
Date: Tue, 14 Oct 2003 19:55:35 -0700 (PDT)
X-Message-Number: 13
I was wondering about for default
Richard Amirault <ramirault@erols.com> wrote:You can assign certain number
keys (not on keypad) to bring up specific, saved maps. I don't have my
APRSDos program on this computer, but I think 3,5, 7 and 9 can be used. I'm
not sure if this answers your question. Did you mean the default on program
start?
Richard Amirault N1JDU Boston,
MA, USA
www.erols.com/ramirault "Go Fly A Kite"
---
END OF DIGEST
Read previous mail | Read next mail
| |
