| |
ZL3AI > APRDIG 13.10.03 06:15l 37 Lines 1072 Bytes #999 (0) @ WW
BID : 2143-ZL3AI
Read: GUEST
Subj: TAPR Digest, Oct 10, 4/4
Path: DB0FHN<DB0RGB<DB0MRW<DB0ERF<DB0FBB<DB0BI<DB0NOS<DB0EA<DB0RES<ON0BEL<
IR0NET<LU1FES<ZL2TZE<ZL3VML
Sent: 031012/1340Z @:ZL3VML.#80.NZL.OC #:10309 [Chch-NZ] FBB7.00i $:2143-ZL3AI
From: ZL3AI@ZL3VML.#80.NZL.OC
To : APRDIG@WW
Subject: RE: Alternate source for Q constructs
From: "AE5PL Lists" <HamLists@ametx.com>
Date: Fri, 10 Oct 2003 17:22:24 -0500
X-Message-Number: 33
There have been some updates to the q construct since Dale's pages were
created. Specifically, there are additional codes (O and o) and there
is some refinement of the algorithm which can be found at
http://www.aprs-is.net/q.htm However, for basic principles, Dale's page
is good.
73,
Pete Loveall AE5PL
pete@ae5pl.net
----------------------------------------------------------------------
Subject: Re: Dwait Hacks kill APRS
From: "Tim Cunningham" <tim_cunningham@mindspring.com>
Date: Fri, 10 Oct 2003 15:39:18 -0500
X-Message-Number: 34
>>SLOTTIME can only be set as low as 1 on the UIDIGI firmware.
>quivalent to 10 ms - still pretty short. Then there's always fullduplex...
The down side to using full duplex on a digi is the digi can and will clash
with other packets when it decides to ID. That would not be a network
friendly digipeater.
---
END OF DIGEST
Read previous mail | Read next mail
| |
