| |
DL1FDF > QRP 20.04.98 23:00l 102 Lines 4578 Bytes #-10438 (0) @ WW
BID : 204805DB0VFK
Read: DG6MS GUEST
Subj: SIERRA PWR MODS 2
Path: DB0ZKA<DB0ABH<DB0SRS<DB0FP<DB0GV<DB0EAM<DL0EAM<DB0VFK
Sent: 980420/2036z @:DB0VFK.#HES.DEU.EU [JO41SG TheBox DG5FAU] $:204805DB0VFK
de DL1FDF @ DB0VFK.#HES.DEU.EU (Steve)
to QRP @ WW
Date: Fri, 20 Mar 1998 09:40:35 -0700
From: "Bob Follett" <bfollett@ditell.com>
To: "QRP-L Group" <qrp-l@Lehigh.EDU>
Subject: [6468] Sierra Caps -- Back to the Beginning
Message-ID: <01bd541e$e7f9c5e0$e336b3cf@newmicronpc>
MIME-Version: 1.0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Gang:
It has been over a year since my article on increasing Sierra power
output was published in QRPp -- You do subscribe, don't you?
This Module cap thing is getting out of hand! I conducted over 40 tests
on Sierra power with some guidance from Wayne, and reported that the S.M.
modifications made a minimal difference -- mostly on the lower bands
where large capacitance values are required.
If you are intent on replacing the original caps, be forewarned that on
80 & 40M, the values are high enough where a "normal voltage value" of 300V
won't fit on the module. So -- the dilemma is this: where a less lossy cap
is needed the most, the values and resultant size are the largest.
I personally think you would do just as well to replace the small caps
with larger voltage ones, even in ceramic. I believe Dave Benson has
also made some remarks about all of this in the past, and Paul Harden has
also commented on usage of various capacitor types. Don't get hung up on
silver mics! (Which aren't manufactured anymore -- but thats another
story)
NOW THE GOOD STUFF:
As Dave Fifield noted in his post today, reworking the Xmit. Pi filters
on the modules made a BIG difference in power output.
Why is this? Wayne designed the Sierra to produce 2W, average, output.
That was his design parameter. When we muck around to increase power,
we changed his design.
Dave Meacham, in QRPp Sept. 95. stated the problem well. " Output
filters are designed for a specific termination, usually 50ohms....the
proper resistive component of the load should approximate the
collector-voltage squared, divided by two times the power."
So...when we crank up the voltage, or increase the power output, the
resistance changes....and it goes lower. One way to deal with this
mis-match is to reduce turns on L5 & L6 to find the best impedance for a
proper load to the final. The results, as both Fifield and I have
stated, can be dramatic. The original work on this mismatch was noted by
others in early 1995 and served as the starting point for my own tweaking
experiments.
Is this the best solution? No, probably not. But its the solution I
originally reported. Wayne has always stated the proper solution is a
matching transformer which replaces the rf choke feeding the final
collector. I had already modified all my modules for maximum power
output for "my components and voltage choice", and didn't want to start
over from scratch -- so I didn't go back and pursue it, but others have.
If you have not played with module output filter tweaking, then a much
less time consuming option is the 4:1 matching transformer. Roy, AB7CE,
published the results of his modification yesterday, and reported 5W on
the lower bands, 4W on 30 and 20M, and 3W on 15 and 10M. (With a final
change to an SK9618).
Vic Turner, on Jan 19th, posted a full explanation of building the step
up transformer. "I simply removed the collector choke and substituted
10 bifilar turns wound on a T50-43 ferrite core. This will step the 14.4
collector z up to near 50 ohms! Also note that he had made other mods.
toensure adequate drive. His solution was driver replacement with a 2N5109.
Other variations have been previously posted. If someone needs more
details, I am sure he would be happy to reply. His address is:
victnr@juno.com.
On last word. If you made modifications, and still feel you are not
getting "proper" power output, re-adjust BOTH the XMIT BPF and PMO BPF
trimmer caps on each module for max. power out. Are you getting two peaks on
the trimmers? If not, the combination of component is too far out of spec,
and you have more work to do....
73, Bob
----------------------------------------------------------------
Bob Follett AB7ST, QRP-L # 129, NorCal, ARCI, 10-10, ARS
2861 Estates Dr. VOICE: 801.649.6457
Park City, UT 84060 E-mail: bfollett@ditell.com
---
qsp de dl1fdf
=========================================================================
AX25 : dl1fdf@db0vfk.#hes.deu.eu | dl-qrp-ag GM | g-qrp 8769| qrp-l 252
e-mail: bauer@student.uni-kassel.de | 72 de steve DL1FDF -- DL/VY1QRP
=========================================================================
Read previous mail | Read next mail
| |