| |
ZS6RO > PTCII 14.05.04 08:45l 26 Lines 964 Bytes #999 (0) @ WW
BID : 57128_ZS6RO
Read: OE5TUN GUEST DG6LAY DL3TN DL2MBO DL5SP
Subj: Re: LINFBB + PTCIIPro config ???
Path: DB0FHN<DB0FOR<DB0MRW<DB0PV<DB0FSG<DK0MNL<RW6AT<UA6ADV<ZS6RO
Sent: 040514/0532Z @:ZS6RO.SRJ.GAU.ZAF.AF #:57128 [Jo'burg] $:57128_ZS6RO
From: ZS6RO@ZS6RO.SRJ.GAU.ZAF.AF
To : PTCII@WW
Thanks for the feedback so far ...
If one reads the documentation on LinFBB, it is stated there that an 'H' is
used in PORT.SYS ... If KISS mode is used, an 'X' is used in PORT.SYS file ..
It implies that KISS is not used for the PTCII ... If not I don't know how to
split the COM port to cater for the three tnc's for one com port either, as I
can only find instructions to do that using KISS mode (mkiss command) !!!
I need instructions on how the Linux comports are configured to allow the
PTCII three built-in TNC's to be 'seen' ... In my version of Linux (SuSe
v9.0) the ax25 configuration looks for a file, ax25.config, which contain the
script to enable various drivers like kiss, scc, 6pack and dsri etc ... That
is the file I need a copy of please ...
73. Dick, ZS6RO @ ZS6RO.SRJ.GAU.ZAF.AF
Home-Page: http://www.qsl.net/zs6ro/
E-Mail : richards@pixie.co.za
05:27 UTC 14-May 2004
Read previous mail | Read next mail
| |
