| |
EB2DVY > PSK31 28.02.00 20:27l 137 Lines 4179 Bytes #-9644 (0) @ WW.SYD.NSW.
BID : 1003-EB2DVY
Read: OE1RRB GUEST
Subj: PSK31 Digest V1 #326
Path: OE1XAB<OE3XSR<OE5XBL<OE6XAR<OE3XPR<OM0PBM<SR9ZAA<PP5BLU<PY4BHB<PY3DZZ<
EA5RQ<EA5VDR<EA2BBS<EA2K<EA1URR<EA1URM<EA2RCF<EA2G<EA2URV
Sent: 000227/1708Z @:EA2URV.EABI.ESP.EU #:45425 [URV-ABRA Bilbao] $:1003-EB2DVY
From: EB2DVY@EA2URV.EABI.ESP.EU
To : PSK31@WW.SYD.NSW.AUS.OC
De: Psk31 Digest <owner-psk31@aintel.bi.ehu.es>
Para: <psk31-digest@bipt106.bi.ehu.es>
Asunto: Psk31 Digest V1 #326
Fecha: domingo 27 de febrero de 2000 5:44
Psk31 Digest Sunday, February 27 2000 Volume 01 : Number 326
In this issue:
Re: [psk31] Help on PSK-31 Please
Re: [psk31] IBM 66
[psk31] 706 Mk II to Sony Laptop
[psk31] Wondering Why us Warblers are hearing Pactor?
See the end of the digest for information about psk31-digest
----------------------------------------------------------------------
Date: Sat, 26 Feb 2000 06:24:24 EST
From: Charles R Greene <cgreene7@juno.com>
Subject: Re: [psk31] Help on PSK-31 Please
On Thu, 24 Feb 2000 17:45:46 -0700 "Mike Newbold" <newbold@cmn.net>
writes:
Try pin 5 too. I have a miniture SPDT switch so I can switch
between 5 and 7. It seems the software designers haven't
standardized on which pin to use.
>
> I'm getting rx but no tx. waterfall is working and some readable
> messages.
>
> My set up: FT1000mp for rig, electorkit for interface, and digipan
> for
> software.
> off of pin 7 RTS of COMport i get my minus 10v. on rx, but does not
> go to
> positive 10v for TX. just stays -10v. i don't seem to get a plus
> voltage
> any where on the COM port.
>
Charles Greene
Amateur Call W1CG
Bristol, RI
------------------------------
Date: Sat, 26 Feb 2000 06:25:36 EST
From: Charles R Greene <cgreene7@juno.com>
Subject: Re: [psk31] IBM 66
Should work, provided you hae a 16 bit sound card
On Thu, 24 Feb 2000 16:05:11 -0600 "Duane L. Mitchell"
<duanelmitchell@worldnet.att.net> writes:
> I have access to an old IBM 66Mhz computer. Will that work ok with
> PSK or do
> I need something faster?
>
Charles Greene
Amateur Call W1CG
Bristol, RI
------------------------------
Date: Sat, 26 Feb 2000 07:38:11 -0800
From: "Robert G.Wagner" <n6dur@san.rr.com>
Subject: [psk31] 706 Mk II to Sony Laptop
Hi Fellow Warblers;
Using Yaesu FT-1000 and Desktop computer at home with routine interface
requiring isolation transformers and appropriate voltage dividers;
however for the mobile have found that straight through Radio Shack
cable from the Earphone Out jack to the 706 Mk II Din Connector AF IN
Pink Pin 11 works fine, however for the AF Out Pin 12 Light blue 706 Mk
II Din, you must have a voltage divider to drop the Sony Mic jack input
signal to a more appropriate level. You should experiment with a value
for the divider, but a 220K to 50K voltage drop is a start. The value
seems to depend on the software you are using. Peter's software is a
little more tolerent, while WinPsk advises you to reduce the input
tones. I added this info concerning the 706-Sony Laptop combination
because it is usually the transceiver mic input that requires a voltage
drop. I use the KISS system for keying; a Radio Shack footswitch
connected to the 706 Mk II Din Pin 3 Orange and the Din GND Pin 2 Red.
Works great!! I'm now full service mobile. Will be mobiling in SEP from
SDiego to RI; listen for me. 73's de N6DUR BOB
- --
ICQ# 2667720
WebMail: n6dur@netscape.net
Page me at:
http://wwp.mirabilis.com/2667720#pager
------------------------------
Date: Sat, 26 Feb 2000 08:14:18 -0800
From: "Robert G.Wagner" <n6dur@san.rr.com>
Subject: [psk31] Wondering Why us Warblers are hearing Pactor?
Hi Fellow PSK31 Users;
Reading the latest March QST Page 90 article should open our eyes to why
we are hearing Pactor all around 14070.
I can now see how us warbler's are not too appreciated. This article is
worth reading.
de N6DUR
- --
ICQ# 2667720
WebMail: n6dur@netscape.net
Page me at:
http://wwp.mirabilis.com/2667720#pager
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
to unsuscribe from the list send to majordomo@aintel.bi.ehu.es a message
with a text line as follow: unsubscribe psk31 or unsubscribe psk31-digest
More instructions on PSK31 Webpage: http://aintel.bi.ehu.es/psk31.html
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
------------------------------
End of Psk31 Digest V1 #326
***************************
Read previous mail | Read next mail
| |
