| |
EB2DVY > PSK31 28.01.00 13:01l 122 Lines 4125 Bytes #-9676 (0) @ WW.SYD.NSW.
BID : 865-EB2DVY
Read: OM3LU OE1RRB GUEST
Subj: PSK31 Digest V1 #297
Path: OE1XAB<OE3XPR<OE3XBS<OE5XBR<OE2XUM<OE2XOM<DB0PV<DB0ISW<OE7XBB<IN3TRX<
IN3TTI<IK5CKL<IW5BFZ<IK2QCA<I1YLM<I1YLM<WU3V<EA7URC<EA7GRA<EA5URD<
EA5RKE<EA5RCI<EA5VDR<EA3B<ED3ZAF<EA2K<EA1URR<EA1URM<EA2RCF<EA2G<EA2URV
Sent: 000127/1957Z @:EA2URV.EABI.ESP.EU #:38800 [URV-ABRA Bilbao] $:865-EB2DVY
From: EB2DVY@EA2URV.EABI.ESP.EU
To : PSK31@WW.SYD.NSW.AUS.OC
De: Psk31 Digest <owner-psk31@aintel.bi.ehu.es>
Para: <psk31-digest@bipt106.bi.ehu.es>
Asunto: Psk31 Digest V1 #297
Fecha: lunes 24 de enero de 2000 4:26
Psk31 Digest Monday, January 24 2000 Volume 01 : Number 297
In this issue:
[psk31] PSK nets
[psk31] Old computers and psk31 KB7JAL--Tom
Re: [psk31] Old computers and psk31 KB7JAL--Tom
Re: [psk31] Old computers and psk31 KB7JAL--Tom
See the end of the digest for information about psk31-digest
----------------------------------------------------------------------
Date: Sat, 22 Jan 2000 22:39:31 -0600
From: Cal Kutemeier <ckuter@ix.netcom.com>
Subject: [psk31] PSK nets
Can someone give me the times and freqs for any PSK 31 nets in US?
Thanks
KG9PQ
------------------------------
Date: Sun, 23 Jan 2000 09:10:56 -0800
From: csawyer@wvi.com
Subject: [psk31] Old computers and psk31 KB7JAL--Tom
I tried running psk31 on a 486-66 with windows 95 and had trouble getting
psk31 to work. Does windows 95 take up to much room? Then I tried Windows
3.1 with the same results. The screen doesn't seem to fully load and can't
find a signal. The sound card is set for full duplex.
Is my old computer just junk?
winpsk gives the message "computer is to slow" so I tried the original
version of psk31 and still no luck! does anyone have any good answers?
tom kb7jal
------------------------------
Date: Sun, 23 Jan 2000 13:43:01 -0500
From: "Robert Lay" <w9dmk@crosslink.net>
Subject: Re: [psk31] Old computers and psk31 KB7JAL--Tom
Dear Tom,
You, yourself, have found your answers.
It is difficult to diagnose the problem remotely, but your tests are very likely
to be conclusive. Your symptoms are classic and are a far better indicator than
having someone tell you what computers will or will not hack it.
Here are some interesting statistics from the WinPSK CPU utilization display:
Pentium 75 MHz with 48 MB Ram:
17% in Xmit, 27% in Receive.
K6-2 350MHz with 64 MB Ram:
3% in Xmit, 7% in Receive.
It has been said that a 486 66MHz machine will do the job, but it does make a
difference as to whether you are running Win 95 or Win 3.1 and it also matters
how much RAM you have. You did not say how much RAM you have.
Normally, one would say that the 486DX 66 MHz machine would do the job, but only
in Win 3.1. Remember that PSK31SBW was written as a 16 bit application and only
needs a Win 3.1 operating system. Conversely, WinPSK was written as a 32 bit
application and really needs the Win 9x operating system AND a much higher
horsepower machine.
73 de Bob Lay, w9dmk@arrl.net, King George, VA
http://www.qsl.net/w9dmk
http://www.fortunecity.com/meltingpot/albania/784
------------------------------
Date: Sun, 23 Jan 2000 13:47:54 -0600 (CST)
From: Bob Roehrig <broehrig@admin.aurora.edu>
Subject: Re: [psk31] Old computers and psk31 KB7JAL--Tom
On Sun, 23 Jan 2000 csawyer@wvi.com wrote:
> I tried running psk31 on a 486-66 with windows 95 and had trouble getting
> psk31 to work. Does windows 95 take up to much room? Then I tried Windows
> 3.1 with the same results. The screen doesn't seem to fully load and can't
> find a signal. The sound card is set for full duplex.
> Is my old computer just junk?
I am running PSK31 on a 486/66 with Win3.1 with no problem. At most the PC
has 16M ram, probably 8 (I don't remember).
"Nostalgia is a thing of the past"
E-mail: broehrig@admin.aurora.edu or k9eui@arrl.net 73 de Bob, K9EUI
CIS: Data / Telecom Aurora University, Aurora, IL
630-844-4898 Fax 630-844-4222
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
to unsuscribe from the list send to majordomo@aintel.bi.ehu.es a message
with a text line as follow: unsubscribe psk31 or unsubscribe psk31-digest
More instructions on PSK31 Webpage: http://aintel.bi.ehu.es/psk31.html
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
------------------------------
End of Psk31 Digest V1 #297
***************************
Read previous mail | Read next mail
| |
