| |
EI3DIB > PMR 05.04.03 10:48l 25 Lines 823 Bytes #999 (0) @ WW
BID : 34192_EI3DIB
Read: GUEST DB0FHN DK5RAS
Subj: Philips 8020 ?
Path: DB0FHN<DB0ZWI<DB0HOT<DB0MRW<DB0PV<DB0ZKA<DB0KFB<DB0CZ<DB0GE<LX0PAC<
LX0HST<HA3PG<JE7YGF<7M3TJZ<ON0AR<IK1ZNW<GB7CRV<EI3DIB
Sent: 030404/0923Z @:EI3DIB.#TIPP.IRL.EU #:34192 [Ardfinnan] FBB7g $:34192_EI3D
From: EI3DIB@EI3DIB.#TIPP.IRL.EU
To : PMR@WW
Hi and thanks for any help.
I have now obtained the philips HW Programme for this PRM8020 Radio.
Problem is that it is not quite what I wanted as it will read and write to
the rig ONLY with the normal 4 Meter Band information and so far all I have
managed to do it clear what ever was programmed before and to set the push
buttons but it will not change channels or TX any more ?
I have a programme called Workdisk with the software but no help on how to
use this or how to set the actual frequency to specific channels for our 4
Meter 70 Meg part of the band.
This is now getting very frustrating and any help at all would be very much
apreciated.
Any experts out there can offer me help on this PLEASE !!!
Best 73 from John, Sysop @ EI3DIB.#TIPP.IRL.EU
Read previous mail | Read next mail
| |
