| |
PA2AGA > PACDIG 01.07.00 13:34l 240 Lines 6980 Bytes #-9401 (0) @ EU
BID : PR_2000_158G
Read: GUEST
Subj: PacketRadioDigest 2000/158G
Path: DB0AAB<DB0PV<DB0MRW<DB0ERF<DB0BRI<DB0SM<PI8DAZ<PI8GCB<PI8HGL
Sent: 000701/0414Z @:PI8HGL.#ZH1.NLD.EU #:57110 [Den Haag] FBB $:PR_2000_158G
From: PA2AGA@PI8HGL.#ZH1.NLD.EU
To : PACDIG@EU
Date: Sat, 01 Jul 00 01:51:56 MET
Message-Id: <pr_2000_158G>
From: pa2aga@pe1mvx.ampr.org
To: pr_broadcast@pa2aga.ampr.org
X-BBS-Msg-Type: B
> > your sound card manufacturer.
>
> Is there a list of sound cards known to work, or conversely known not to
work?
>
> --
> 73,
> Dave
>
------------------------------
Date: Fri, 23 Jun 2000 16:50:03 -0700
From: Jim <kb9mmcNOkbSPAM@juno.com.invalid>
Subject: TNC-1 {Heath HD-4040}
Hey Stephen:
I have one of these old TNC's that someone gave to me. They
didn't give me the manual with the the comands. Can you drop me
an e-mail, also what dos program are you running.
Jim
KB9MMC@juno,com
Got questions? Get answers over the phone at Keen.com.
Up to 100 minutes free!
http://www.keen.com
------------------------------
Date: Mon, 26 Jun 2000 16:22:07 +0100
From: "Karl \"Charly\" L." <oe3klu@aon.at>
Subject: Try new PC-Flexnet 32 BIT :)
Rehello !
For all that run 16 Bit of PC-Flexnet
try new PC-Flexnet 32 bit -> out on
the Hamradio 2000 last weekend :))))
73! Charly OE3KLU
--
-----------------------------------------------------------
Karl "Charly" Lichtenecker (OE3KLU)
EMAIL : OE3KLU@OEVSV.AT
HTTP : WWW.QSL.NET/OE3KLU
ICQ# : 29113670 (Charly)
------------------------------------------------------------
------------------------------
Date: Mon, 26 Jun 2000 13:33:31 -0400
From: "Rob" <Pse@NoEmail.Com>
Subject: Try new PC-Flexnet 32 BIT :)
Where can you get the new 32 bit version of FLEXNET. It is not on the
FLEXNET home page.
Rob
"Karl "Charly" L." <oe3klu@aon.at> wrote in message
news:39578333$0$23522@SSP1NO25.highway.telekom.at...
> Rehello !
>
> For all that run 16 Bit of PC-Flexnet
> try new PC-Flexnet 32 bit -> out on
> the Hamradio 2000 last weekend :))))
>
> 73! Charly OE3KLU
>
> --
>
> -----------------------------------------------------------
>
> Karl "Charly" Lichtenecker (OE3KLU)
>
> EMAIL : OE3KLU@OEVSV.AT
> HTTP : WWW.QSL.NET/OE3KLU
> ICQ# : 29113670 (Charly)
>
> ------------------------------------------------------------
>
>
>
------------------------------
Date: Mon, 26 Jun 2000 18:42:36 +0100
From: "Robert" <bobit@freeuk.com>
Subject: Try new PC-Flexnet 32 BIT :)
Hi there,
I have been looking for the 32 bit version on the net, it is said to be
available on flexnet site, but where ????
Thanks
73
Karl "Charly" L. wrote in message
<39578333$0$23522@SSP1NO25.highway.telekom.at>...
>Rehello !
>
>For all that run 16 Bit of PC-Flexnet
>try new PC-Flexnet 32 bit -> out on
>the Hamradio 2000 last weekend :))))
>
>73! Charly OE3KLU
>
>--
>
>-----------------------------------------------------------
>
>Karl "Charly" Lichtenecker (OE3KLU)
>
>EMAIL : OE3KLU@OEVSV.AT
>HTTP : WWW.QSL.NET/OE3KLU
>ICQ# : 29113670 (Charly)
>
>------------------------------------------------------------
>
>
>
------------------------------
Date: Tue, 27 Jun 2000 14:44:36 +0200
From: Alexander Kurpiers <a.kurpiers@nt.tu-darmstadt.de>
Subject: Try new PC-Flexnet 32 BIT :)
Robert wrote:
>
> Hi there,
> I have been looking for the 32 bit version on the net, it is said to be
> available on flexnet site, but where ????
It should be on www.afthd.tu-darmstadt.de/~flexnet soon. They are
currently working on the new web pages.
73' Alexander
--
Alexander F. Kurpiers | Voice: +49-6151-162369
Institut fuer Nachrichtentechnik | Fax : +49-6151-165545
Merckstrasse 25 | EMail: a.kurpiers@nt.tu-darmstadt.de
D-64283 Darmstadt (Germany) | Hamradio: dl8aau@db0ais.#hes.deu.eu
------------------------------
Date: Tue, 27 Jun 2000 07:04:10 +0100
From: "g0lrk" <g0lrk@NOSPAMqsl.net>
Subject: Winpack problems I think?
Just started on packet and not used to everything but have a problem I can't
sort out:--Can't get into loacal BBS direct due to only 1.5 watts output,
so, I "Digipeat" through my friends station no problem. If I type c (BBS) v
G(4abc) I can connect first time. But the problem is how do I build a
"Bulls" list. BBS have given me "U" status, my friend told me to type at
command "unproto "BBS" v "G(4abc) which I did, and nothing happens, left
radio and pewter on for 4 days all to no avail. Sent F5 which somone told me
to do to alert BBS I need Bulls after number 123?. Where am I going wrong?
Tnc is KPC3 if that matters at all. Good ideas welcome as I've tried lots of
things over the last 2 weeks and still not getting the "Bulls".
Just a point though I can receive a stream of info from the BBS as if g1aaa
logs in and does whatever I can receive all that traffic. Can also connect
to other hams and then connect to the BBS or to other Nodes.
Polite ideas please on a stuck down envelope or some other means would be
appreciated very much.
--
Sent by Kev Wall G0LRK.
Email me
at g0lrk@REMOVE-THISqsl.net.
Take the REMOVE-THIS away to
email me please.
------------------------------
Date: Tue, 27 Jun 2000 14:54:53 +0100
From: Roger Barker <roger@peaksys.co.uk>
Subject: Winpack problems I think?
In article <39584380@news.server.worldonline.co.uk>, g0lrk
<g0lrk@NOSPAMqsl.net> writes
>Just started on packet and not used to everything but have a problem I can't
>sort out:--Can't get into loacal BBS direct due to only 1.5 watts output,
>so, I "Digipeat" through my friends station no problem. If I type c (BBS) v
>G(4abc) I can connect first time. But the problem is how do I build a
>"Bulls" list. BBS have given me "U" status, my friend told me to type at
>command "unproto "BBS" v "G(4abc) which I did, and nothing happens, left
>radio and pewter on for 4 days all to no avail. Sent F5 which somone told me
>to do to alert BBS I need Bulls after number 123?. Where am I going wrong?
>Tnc is KPC3 if that matters at all. Good ideas welcome as I've tried lots of
>things over the last 2 weeks and still not getting the "Bulls".
I presume you mean that you are trying to receive the FBB unproto
message headers? In which case the following are required:-
1. You need 'U' status on the BBS, but you say you've got that.
2. You must set UNPROTO in your TNC to the BBS callsign, with an
optional digi if you need one. I'm not too sure what you mean by -
"unproto "BBS" v "G(4abc)
But, for example, my local BBS is GB7OPC, so I would set my UNPROTO with
the command UNPROTO GB7OPC
If I needed my unproto sync requests go via a digi, then I would use,
for example, UNPROTO GB7OPC V BOSTON (BOSTON being a digipeater alias)
3. You must be able to hear the unproto beacons when the BBS sends them.
If you can't, then you need to persuade the sysop to send the beacons
via a digi, but he may well not be prepared to do that.
4. You must configure just a few basic TNC parameters correctly. (See
the "Setting Up The TNC" section of the help.)
If you fail at point '3', because you can't hear the beacons, then you
don't need to use the unproto beacons to collect a bulletin list,
To be continued in digest: pr_2000_158H
Read previous mail | Read next mail
| |
