| |
PA2AGA > PACDIG 18.06.00 15:07l 132 Lines 4122 Bytes #-9415 (0) @ EU
BID : PR_2000_152A
Read: GUEST
Subj: PacketRadioDigest 2000/152A
Path: DB0AAB<DB0SL<DB0RGB<DB0MRW<DB0ERF<DB0SHG<DB0SM<PI8DAZ<PI8APD<PI8WNO<
PI8VAD<PI8HGL
Sent: 000618/0144Z @:PI8HGL.#ZH1.NLD.EU #:52499 [Den Haag] FBB $:PR_2000_152A
From: PA2AGA@PI8HGL.#ZH1.NLD.EU
To : PACDIG@EU
Date: Sun, 18 Jun 00 00:20:30 MET
Message-Id: <pr_2000_152A>
From: pa2aga@pe1mvx.ampr.org
To: pr_broadcast@pa2aga.ampr.org
X-BBS-Msg-Type: B
Packet-Radio Digest Fri, 16 Jun 2000 Volume 2000 : Issue 152
Today's Topics:
FS:AEA-PK 232
Good Info Source For Newcomer?? (2 msgs)
Looking for some Fun??
New Soundcard Packet & APRS good map (2 msgs)
PSK31 Computer Speed
Send Replies or notes for publication to: <Packet-Radio@UCSD.Edu>
Send subscription requests to: <Packet-Radio-REQUEST@UCSD.Edu>
Problems you can't solve otherwise to brian@ucsd.edu.
Archives of past issues of the Packet-Radio Digest are available
(by FTP only) from ftp.UCSD.Edu in directory "mailarchives/packet-radio".
We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party. Your mileage may vary. So there.
Loop-Detect: Packet-Radio:2000/152
----------------------------------------------------------------------
Date: Thu, 15 Jun 2000 18:34:40 GMT
From: Robert Stamper <rstamper@worldnet.att.net>
Subject: FS:AEA-PK 232
I have an AEA PK-232 with power supply in good working and looking
condition.Asking $100.00 shipped to the lower 48.Please reply via
e-mail.
Regards
Bob Stamper
------------------------------
Date: Thu, 15 Jun 2000 20:28:37 GMT
From: BillBischoff@nettally.com (Bill Bischoff)
Subject: Good Info Source For Newcomer??
Can anyone recommend a good primer on packet for someone totally new to the
mode. I've got an HTX-202 which I can dedicate to 2m packet and I'd like to
get my feet wet but most web pages assume the reader has a working knowledge
of packet - which I certainly do not. Thanks.
73,
Bill
WS4B
------------------------------
Date: Fri, 16 Jun 2000 06:54:13 -0400
From: "Loyd C. Headrick" <kf4ugt@bellsouth.net>
Subject: Good Info Source For Newcomer??
try http://www.packetradio.com
a good source of information to setup a station
Loyd
kf4ugt
Bill Bischoff <BillBischoff@nettally.com> wrote in message
news:6Ya25.173407$701.2243986@news4.giganews.com...
> Can anyone recommend a good primer on packet for someone totally new to
the
> mode. I've got an HTX-202 which I can dedicate to 2m packet and I'd like
to
> get my feet wet but most web pages assume the reader has a working
knowledge
> of packet - which I certainly do not. Thanks.
>
> 73,
>
> Bill
> WS4B
------------------------------
Date: Thu, 15 Jun 2000 14:00:20 GMT
From: lwdzkf@amberstoyshop.com
Subject: Looking for some Fun??
Looking for live sex shows? Looking for pretty ladies? Come over and take a
look!!! I know I can afford $1.95 for three days of getting off...can you:):)
www.4-crazysex.com
Come over and take a look....
TIA
Amber
krzpqwcwscccqdbitfnxdzwwltptuwzujlzfjhjrjedjvhbuyw
------------------------------
Date: Thu, 15 Jun 2000 19:24:26 +0100
From: "Robert" <bobit@freeuk.com>
Subject: New Soundcard Packet & APRS good map
Hi There,
I have a similar problem with running AGW with the soundcard, it only
sends a few transmissions until the whole computer locks and needs to be
restarted.
I know you may not want to her=ar this but here it goes.....
So i downloaded the flexnet software and installed it, easy enough so far
...... SM.doc in the downloads tells you how to create the batch file for
setting it up with soundcard.
I did as said after reading the help files but one problem, it is best to
specify the IRQ of your soundcard when loading the smsbc soundcard driver,
otherwise it will NOT (in my case) find the soundcard.
I restarted and run the batch file, all seems well, then i ran the
smdiag.exe and setup the audio levels, smdiag is a good test to se if the
system is working :)).
I know it only says for win95, but it works fine with win95 drivers here and
i am using win98SE.
Flexnet seems to run fine with Winpack, been running it now for 2 weeks and
To be continued in digest: pr_2000_152B
Read previous mail | Read next mail
| |
