| |
PA2AGA > PACDIG 29.04.99 02:14l 184 Lines 5422 Bytes #-9879 (0) @ EU
BID : PR_99_95A
Read: GUEST
Subj: PacketRadioDigest 99/95A
Path: DB0AAB<DB0ZKA<DB0ABH<DB0SRS<DB0MW<DB0ERF<DB0SHG<DB0HSK<PI8DRS<PI8DAZ<
PI8GCB<PI8WFL<PI8VNW
Sent: 990428/1946Z @:PI8VNW.#ZH2.NLD.EU #:433 [HvHolland] FBB7.00g $:PR_99_95A
From: PA2AGA@PI8VNW.#ZH2.NLD.EU
To : PACDIG@EU
Received: from pa2aga by pi1hvh with SMTP
id AA15864 ; Wed, 28 Apr 99 19:23:50 UTC
Received: from pa2aga by pa2aga (NET/Mac 2.3.67/7.5.3) with SMTP
id AA00013419 ; Wed, 28 Apr 99 21:07:27 MET
Date: Wed, 28 Apr 99 21:05:15 MET
Message-Id: <pr_99_95A>
From: pa2aga
To: pr_broadcast@pa2aga
Subject: PacketRadioDigest 99/95A
X-BBS-Msg-Type: B
Packet-Radio Digest Tue, 27 Apr 99 Volume 99 : Issue 95
Today's Topics:
AEA
cmsg cancel <dN1V2.19927$qj7.230699@news14.ispnews.com> ignore no reply
FBB problem
HEALP!!! SEARCH VB6 terminal
Keying the Yaesu FT470 Handheld (2 msgs)
Packet
TNC Question (2 msgs)
wanted
wanted soft for pk232mbx
Send Replies or notes for publication to: <Packet-Radio@UCSD.Edu>
Send subscription requests to: <Packet-Radio-REQUEST@UCSD.Edu>
Problems you can't solve otherwise to brian@ucsd.edu.
Archives of past issues of the Packet-Radio Digest are available
(by FTP only) from ftp.UCSD.Edu in directory "mailarchives/packet-radio".
We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party. Your mileage may vary. So there.
Loop-Detect: Packet-Radio:99/95
----------------------------------------------------------------------
Date: Thu, 22 Apr 1999 06:46:46 GMT
From: alumi@num.org (Al Uminium)
Subject: AEA
On Tue, 20 Apr 1999 04:21:15 GMT, alumi@num.org (Al Uminium) wrote:
>Is AEA gone, totally out of business?
>
Many thanks.
>.
------------------------------
Date: Mon, 26 Apr 1999 19:13:24 +0000
From: andrew@erlenstar.demon.co.uk
Subject: cmsg cancel <dN1V2.19927$qj7.230699@news14.ispnews.com> ignore no
reply
Spam (EMP) cancelled - type=LCBOT
Cancel ID: 2W38K5ELYC?Y]A^P3V+I?GND"-V)G!9G*29/X'^2&:ZKU#@-N<Q&EUE6
>.
------------------------------
Date: Sun, 25 Apr 1999 12:20:40 +0100
From: "Per Odegaard" <per.odegaard@btinternet.com>
Subject: FBB problem
Hi!
Every time I start WinFBB (v7.00g23) on my Pentium PC I get the
following error message:
WFBB caused a general protection fault
in module COMM95.DRV at 0001:00000297.
Registers:
EAX=00000000 CS=1d0f EIP=00000297 EFLGS=00000292
EBX=0000ff80 SS=5157 ESP=0000ea6a EBP=0000ea70
ECX=00000000 DS=1cff ESI=0000cf80 FS=0000
EDX=8020124f ES=16f7 EDI=00006a7c GS=0000
Bytes at CS:EIP:
89 84 aa 00 89 94 ac 00 26 8b 45 04 89 84 b2 00
Stack dump:
00801ea7 ea7c0080 1eb7051e 16f76a7c eab2ff80 1eb710bf 16f76a7c
51570080 31c80051 03fc5157 bb0000b8 d3ea000f 001eb70f 00800080
1ea709f4 16f7ea82
When I abort the programme and restart FBB it's OK.
Have you any ideas what the above means, and how I get sort out the
problem, please?
73, Per (G0DJT/LA9GG) - SysOp @GB7DJT.
>.
------------------------------
Date: Sun, 25 Apr 1999 11:46:00 +0200
From: "Frank" <wlog[nospam]@ticino.com>
Subject: HEALP!!! SEARCH VB6 terminal
Help Help Help PLEASE HELP HELP HELP
I search one source of a simple, werry simple COM terminal for to using in
one applications on VISUAL BASIC 6 for a 32bit applciation.
mny tnx for your hekp!
Frank, hb9oab
email hb9oab@ticino.com
delete KILLME on the reply
>.
------------------------------
Date: 26 Apr 1999 13:33:40 GMT
From: Hamish Moffatt <hamish@rising.com.au>
Subject: Keying the Yaesu FT470 Handheld
Ralph Mowery <rmowery@ibm.net> wrote:
> You use a standard plug in the mick jack. The one with just a
> outside shell or ground and the center. A Two wire jack. I don't
> recall the exect value of resistor, but start with about 1000 ohms
> and adjust up or down as needed. Put this resistor from the center
> of the jack to the ground. To feed audio in, put a capacitor from
> the center of the mick jack to the incomming audio and the ground to
> the shell of the plug.
> This will key the rig all the time, unhook the resistor(with a
> relay) when you want to stop transmitting.
No relay required:
------/\/\/\--- Centre of mic connector
/
--/\/\--| Common NPN transistor
\
v
|
Ground
Just apply enough voltage to the base resistor to switch on the transistor
(saturation), which will ground the base of the collector resistor,
which keys the transmitter.
Hamish
--
Hamish Moffatt Mobile: +61 412 011 176 hamish@rising.com.au
Rising Software Australia Pty. Ltd.
Developers of music education software including Auralia & Musition.
31 Elmhurst Road, Blackburn, Victoria Australia, 3130
Phone: +61 3 9894 4788 Fax: +61 3 9894 3362 USA Toll Free: 1-888-667-7839
Internet: http://www.rising.com.au/
>.
------------------------------
Date: Sun, 25 Apr 1999 08:25:21 -0400
From: Ralph Mowery <rmowery@ibm.net>
Subject: Keying the Yaesu FT470 Handheld
You use a standard plug in the mick jack. The one with just a
outside shell or ground and the center. A Two wire jack. I don't
recall the exect value of resistor, but start with about 1000 ohms
and adjust up or down as needed. Put this resistor from the center
of the jack to the ground. To feed audio in, put a capacitor from
the center of the mick jack to the incomming audio and the ground to
To be continued in digest: pr_99_95B
Read previous mail | Read next mail
| |
