| |
G0BJJ > MODEM 26.02.05 13:04l 31 Lines 790 Bytes #999 (0) @ WW
BID : 5C0312G0BJJ
Read: DL1DVE GUEST DO1WWA OE3GMW DK3HG
Subj: Netgear DG834G\Echolink
Path: DB0FHN<DB0MRW<DB0ERF<DB0FBB<DB0IUZ<DB0GOS<DB0ACC<DB0EA<DB0RES<ON0AR<
VA2HAR<IK1ZNW<GB7CRV<GB7CIP<GB7WSX<GB7IPW
Sent: 050226/1026Z @:GB7IPW.#38.GBR.EU #:60987 XFBB7.04j Bid:5C0312G0BJJ
From: G0BJJ@GB7IPW.#38.GBR.EU
To : MODEM@WW
The only way I can use Echolink with my Netgear DG834G Modem is to
activate 'disable port scan and DOS protection' in the WAN (wide area
network) setup.
So it must be a Firewall problem.
This is undesirable as it leaves me open to attack by hackers.
The problem has been posted on the 'Port Forward' E'link forum but I have
had no replies.
Netgear has been phoned but they are not helpful.
The modem has firmware ver1.05 installed.
If anyone reading this has had this problem and has the answer I would
like to know what it is.
Eqso works fine and is not affected.
73 - Peter, G0BJJ @ GB7IPW-2
Message timed: 09:24 on 2005-Feb-26
Message sent using WinPack-AGW V6.80
written by Roger Barker Silent Key (with regret) 09/09/04
Read previous mail | Read next mail
| |
