| |
VK3FRC > MFJ 15.01.01 08:45l 39 Lines 1020 Bytes #999 (0) @ WW
BID : 7231_VK3FRC
Read: GUEST
Subj: mfj 1274 AND 1270b Kiss Mode
Path: DB0ZKA<DB0GPP<DB0LX<DB0RBS<DB0PSC<DB0GE<LX0PAC<LX0HST<HA3PG<WB0TAX<
VK3BBS<VK3FRC
Sent: 010115/0656Z @:VK3FRC.#MEL.VIC.AUS.OC #:7231 [Patterson Lake] FBB7.00g
From: VK3FRC@VK3FRC.#MEL.VIC.AUS.OC
To : MFJ@WW
Hello All
Thanks for reading this message and I would like to know that when you put a
MFJ TNC into kiss mode do you need to set any paramaters first.
Also these TNC will be used with BPQ 409c and running WinFBB Ver 7.00g
What functions should be turned on or does BPQ set all functions in the TNC
when in Kiss Mode.
Next problem is Windows 95B is been used as the support platform, and the
Flow Control in the Comm's Ports should be set for WHAT.
Flow Control Xon / Xoff
Flow Control Hardware
Flow Control NONE
Which of the 3 above, I have tried the Lot, But the system keeps falling over
once per day about 23 hours after a reboot.
Also Advance Port Settings
Enable Auto CTS /RTS flow control YES /NO, which one or not at all.
If any body has a answer please drop me a line at, Packet Address or Via
E-Mail
PAcket VK3FRC@VK3FRC.#MEL.VIC.AUS.OC
E-Mail pbrennan@telstat.com.au
Many thanks
Peter Brennan
VK3TE
Sysop of the Club BBS VK3FRC
Read previous mail | Read next mail
| |
