| |
G4XTA > KPC3 19.09.04 13:17l 25 Lines 1313 Bytes #999 (0) @ EU
BID : 8420_GB7SAN
Read: DG5YM GUEST
Subj: BUDLIST HELP PSE?
Path: DB0FHN<DB0FOR<DB0SIF<DB0EA<DB0RES<DK0WUE<HA3PG<IK1ZNW<GB7CRV<GB7FUR<
GB7IOM<GB7SAN
Sent: 040918/1329Z @:GB7SAN.#78.GBR.EU #:8420 [Glasgow] FBB7.00i $:8420_GB7SAN
From: G4XTA@GB7SAN.#78.GBR.EU
To : KPC3@EU
HI GUYS
PSE HELP WITH SETUP PARAMETERS FOR 'BUDLIST' ON KANTRONICS TNC'S.
IN NEED TO INSTALL A NODE FOR 8 USERS ONLY - NO ACCESS FOR OTHER USERS.
SO, I READ THE KANTRONICS HANDBOOK AND DO THE FOLLOWING:
1). I LIST THE 8 CALLSIGNS IN 'BUDCALLS' SEPERATED BY COMMAS
like this (cmd: BUDLIST G4XXX,G3YYY,M0JJJ,M5TTT)
2). THEN I SET 'BUDLIST' TO 'BOTH' OR 'ON'.
NOW ACCORDING TO THE MANUAL, THE TNC SHOULD ONLY HEAR PACKETS ADDRESSED
TO OR FROM THE CALLSIGNS IN THE BUDCALLS, AND IGNORE ALL OTHERS.
IN OTHER WORDS, THE LUCKY FEW IN THE BIDCALLS REGISTER CAN USE THE TNC TO
CONNECT TO ANYONE THEY WANT, BUT NOBODY ELSE CAN. OR SO THE BOOK SAYS!!!
ANYHOW, AFTER I SET THIS UP I ASKED OTHER GUYS (WHO WERE NOT IN THE BUDCALLS
LIST) TO TEST THE SYSTEM FOR ME, TO CHECK THAT THEY GOT REJECTED.
TO MY SURPRISE, THEY WERE ALLOWED TO CONNECT AND USE THE TNC AS NORMAL!!
I'VE TRIED RESETS AND RE-ENTERING THE INFORMATION, BUT NOTHING WILL WORK.
I'VE RE-READ THE BOOKS AND THIS ONLY CONFIRMS THAT I'VE DONE IT ALL
CORRECTLY. OTHER KANTRONICS USERS AROUND HERE RECKON THE SAME.
SO - PLEASE DO YOU KNOW ANY MORE? MAYBE I'VE MISSED OUT SOME VITAL COMMAND
OR HAVEN'T SEEN THE FINAL THING I'M SUPPOSED TO DO?
YOUR SUGGESTIONS WOULD BE MOST APPRECIATED.
73 Paul G4XTA @ GB7SAN
Read previous mail | Read next mail
| |
