| |
VK8PDG > KAM 21.11.01 09:41l 20 Lines 518 Bytes #999 (0) @ WW
BID : 8300_VK8PDG
Read: DG7MDK DB1VQ GUEST
Subj: KAM.9 some helpfull bulletins
Path: DB0AAB<DB0KFB<DB0CZ<DB0GE<F6KFT<LX0PAC<LX0HST<HA3PG<7M3TJZ<ZL2TZE<
ON0BEL<F6CDD<LA2MV<SK6YW<OZ2BOO<OZ3BOF<OZ3BOE<VK8PDG
Sent: 011118/1350z @:VK8PDG.PLM.#NT.AUS.OC (Palmerston NT) Z:0830 #:8300
KAM.9
Having trouble getting your KAM to key
your transmitter on CW? I hooked up
mine to a Uniden HR-2600 and found it
would not key the rig. So here's a
easy mod which I received directly from
Karl Medcalf at Kantronics:
Bypass resistor R-107. Check your KAM
manual for the location. It's near the
connector end of the TNC, close to the
DB25 connector. You can solder a jumper
wire across the resistor on either side
of the board. Modification works great!
73, Andy/K4ADL @N4QQ.MD.USA.NA
Reposted by VK8PDG
Read previous mail | Read next mail
| |
