| |
VK4TRS > JNOS2 07.09.08 22:33l 29 Lines 739 Bytes #999 (0) @ WW
BID : 8B0042VK4TRS
Read: GUEST
Subj: jnos port help
Path: DB0FHN<DB0MRW<DB0ERF<DB0FBB<DB0IUZ<DB0OVN<DB0GOS<ON0AR<F1ZNR<F4BWT<
VE2PKT<VK4TRS
Sent: 080907/2005Z @:VK4TRS.#BNE.QLD.AUS.OC #:49446 [Brisbane] $:8B0042VK4TRS
From: VK4TRS@VK4TRS.#BNE.QLD.AUS.OC
To : JNOS2@WW
Hi thanks for reading this.
Just setting up jnos 2 in linux and having some problem with setting my
MFJ 1270b in kiss mode, where the tnc is already in kiss mode, the program
starts and the STA led stays lit, so i turn off and back on to clear.
Any info outbound or inbound doesn't happen, and at every beacon, locks
up.
Does the tnc need to be in kiss mode at boot up, or not.
Secondly the correct info for setup, i have setup as the manual states and
help text states but no joy.
Thanks in advance.
Bruce vk4trs
73 - Bruce, VK4TRS @ VK4TRS-1
vk4trs@vk4trs.ampr.org
Gateway to Brisbane's AMPR system.
Message timed: 06:13 on 2008-Sep-08
Message sent using a linux O/S system
Read previous mail | Read next mail
| |
