| |
VK8PDG > INFO 04.10.03 01:39l 49 Lines 1574 Bytes #999 (0) @ WW
BID : 30957_VK8PDG
Read: DB0FHN GUEST
Subj: VK8PDG Auto connect script
Path: DB0FHN<DB0RGB<DB0FSG<DB0ZKA<DB0GPP<DB0LX<DB0RBS<DB0SWR<DB0FP<DB0CWS<
DB0ROF<DB0ACH<DB0ACC<DB0GOS<DB0EEO<DB0RES<ON0AR<7M3TJZ<IK1ZNW<ZL2TZE<
VK8PDG
Sent: 031004/1758Z @:VK8PDG.PLM.#NT.AUS.OC #:30957 FBB7.00i $:30957_VK8PDG
From: VK8PDG@VK8PDG.PLM.#NT.AUS.OC
To : INFO@WW
If you are known to my BBS and you are running WinPac here is a Auto connect
script for anyone that would like to use this BBS please do a MANUAL log in
FIRST so that you get Registered on the system and there after if you are
using WinPac you too can use this Auto connect script.
If you have a Auto connect script made up put this in the sript Directory in
Winpack in BBS.TXT Script into the Script folder within winpack which
{replaces the original BBS.TXT Script}.
That way you only have to press the " F2 key " on your keyboard to connect
to VK8PDG telnet BBS.
Regards
Peter VK8PDG 4-Oct-03
=============================================
BBS.TXT SCRIPT...Cut and past below the line.
=============================================
; All lines in script files that start with ';' are ignored.
;
; This script file - BBS.TXT - ***MUST*** do nothing else other
; than make a connection to your local BBS and then leave you at
; the BBS prompt. It is used in auto-connects.
;
; The hot key.
HOTKEY F2
; The title.
TelNet Connection to a BBS
; Send the command to connect to my local BBS.
; VK8PDG MyIP Login
SEND c 211.26.117.59 :6300
; Wait for the connection to be established. If you get a very fast
; connection to the BBS, you may find you need to remove the WAITCON
; otherwise the BBS prompt may be missed.
; VK8PDG Login
;WAITFOR CALLSIGN :|Windsock error
WAITFOR CALLSIGN :
; Wait for the prompt.
SEND .VK ????? <<<< Put you callsign here
WAITFOR PASSWORD :
SEND VK ??? <<<< Put you Password here
Read previous mail | Read next mail
| |
