| |
VK8PDG > INFO 21.06.03 19:44l 112 Lines 3605 Bytes #999 (0) @ WW
BID : 55678_VK8PDG
Read: DB0FHN GUEST
Subj: Supporting The Ham Bands...How ?.
Path: DB0FHN<DB0RGB<DB0SL<DB0FSG<DB0PV<OE2XOM<OE5XBL<OE3XSR<OK0PCC<OK0PPR<
OK0PPL<RZ6HXA<ER3KAZ<DB0RES<ON0AR<7M3TJZ<VE3MCH<VK8PDG
Sent: 030616/1216Z @:VK8PDG.PLM.#NT.AUS.OC #:55678 FBB7.00g $:55678_VK8PDG
From: VK8PDG@VK8PDG.PLM.#NT.AUS.OC
To : INFO@WW
FROM: VK8PDG @ VK8PDG.PLM.#NT.AUS.OC
TO: ALL@WW
SuB: Supporting The Ham Bands...How ?.
Hello All.
There has been a lot of talk on supporting the ham bands and doing
things via RF..if only that was true !.
The following is for persons that would like a easy and fast program
to use in " SENDING/RECEIVING " mail and could keep on line 24/7 on
there local Packet BBS ,node, or HF PacTor Gateway.
Download " Airmail at Winlink 2000 at the following web URL
http://winlink.org/
Have a look at what this program can do for you and in what way YOU
can support the Amateur systems World Wide by using it on " RF ".
Its easy to follow and you can attach a small zipped file just scroll
click or drag and drop nothing could be more user friendly than that.
So perhaps have a go at the following as it will support all amateur
systems world wide and you can do it via RF to RF, TelNet to RF or
what ever it even comes with a APRS and GPS setup already in the
program and after all we all know how to send a email message ..right !
So here have a go at this but first get your " Registration " done.
How To Send a RF message into an Email address ?.
No its not NEW and its been around for years but there are a fair few
out there that don't know how to do this so here is some help on how
to go about it all.
Just do the following at any PacTor MBO or Packet BBS system that's
on HF, VHF, UHF etc,,
At Command prompt: SP NEXUS
Subject prompt: E-Mail Address <<< Your Friends Email address
Example: SP NEXUS
joe_doe@aol.com
<Then just start writing " Your message " like so>
Good News!
Hello Tom, Dick and Harry, etc etc
(End as usual with '/EX' or 'ctrl-z' on a new line).
A Message can be sent 'to:' ONE E-Mail Address only
but multiple parties can be copied in by adding the following
line(s) to the text:
cc: E-Mail-Address
NOTE:
Please send just plain txt in the messages as they are going
via an RF link.
Some additional notes:
---------------------
Messages
- must comply with relevant Radio Regulations.
- should not exceed 10 kB.
- be in plain language only.
========================================================
Registration
------------
It is recommended to register with winlink.org as you will have
a simplified E-Mail address ( yourcall@winlink.org ) and the sysop
can attempt to deliver all your messages, including those
addressed/formatted incorrectly.
Send your registration as: < SP NEXUS @ winlink.org
Subj.: Netlink Registration
Text : Your First Name
Your Home MBO/BBS
(All *current* 'CMM' are registered automatically)
========================================================
Best Regards
Peter VK8PDG.
(``\-^.^-/'') From The Land Down Under (``\-^.^-/'')
`( 0 0 )' `( 0 0 )'
IIIIIIIIIIooO (_) OooIIIIIIUIIUIIIIIIIIIIIooO (_)OooIIIIII
U U VK8PDG@winlink.org
WW LOCATOR -PH57LM U U Sysops: Peter VK8PDG
Winlink/WinFBB32/APRS U U Info on : QRZ.COM
VK8PDG-L EchoLink:Node 7593.. RF DTMF Link Freq: 146.150 Mhz
YOUR PACTOR/PACKET GATEWAY IN THE NORTHERN TERRITORY.
Tel Net : vk8pdg.no-ip.com Port:23
** Supporting Digital Communications in VK8 **
<><> ( ) Oo. VK8PDG @ VK8PDG.PLM.#NT.AUS.OC ( ) Oo. <><>
EIIIIIIIIIII\_)III( )IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII\_)III( )IIIIII
Read previous mail | Read next mail
| |
