| |
M0JFE > IBM 19.09.06 21:54l 23 Lines 910 Bytes #999 (0) @ WW
BID : 61127-GB7FCR
Read: GUEST DC9BM
Subj: Comm port help
Path: DB0FHN<DB0FOR<DB0SIF<DB0MRW<OK0PPL<DB0RES<DK0WUE<GB7FCR
Sent: 060917/1210Z @:GB7FCR.#16.GBR.EU #:61127 [Blackpool] FBB-7.03a $:61127-GB
From: M0JFE@GB7FCR.#16.GBR.EU
To : IBM@WW
I hope some one can help me I have an old P150 pc that I am haveing
problem getting the 25 pin comm port to work with my kantronics packet
box.I know the lead and box are fine as it works on the P233 machine but I
want to watch the cluster while doing data modes.On the P150 machine it
knows the box is there as you switch on the box the DSR light on winpak
flashes red and green but won't stay on red and niether does the DCD light
.I don't know if I need to set something up in the bios but I know the
mouse works on both comm ports and there are no conflicts any help most
greatful .I have the settings in winpak set the same as the 233 pc.
Any help most greatful
73 - John, M0JFE @ GB7FCR
Ride The Waves And Make New Friends
Email sweevo555@btinternet.com
Tel:- 07981308844
From the house
Message timed: 12:00 on 17-Sep-2006
Message sent using WinPack V6.80
Read previous mail | Read next mail
| |
