| |
GM7HUD > HELP 16.12.04 03:39l 24 Lines 620 Bytes #999 (0) @ EU
BID : 871921GM7HUD
Read: GUEST
Subj: Re: IC706 to s/card help.
Path: DB0FHN<DB0FOR<DB0SIF<DB0EA<DB0RES<ON0BEL<F1HPZ<ON4HU<GB7YFS<GB7MAX<
GB7ESX
Sent: 041216/0006z 11403@GB7ESX.#31.GBR.EU $:871921GM7HUD [Witham, Esx]NNA V3.1
>
> I have a strange problem.
>
So the rumours are true!
> I make a cable to connect soundcard to IC-706.
>
> A simple cable for tx, s/card output to IC706 mic connector via a 0.1æF
> capacitor.
>
> But the tx audio is terrible, what am I doing wrong ?
Not using the connector on the back. My experience of making cables for
Kenwood radios (assorted models) is that using the microphone socket
(with/without attenuators) is fraught with grief. The back panel aux audio
connector always works like a dream.
Try using that instead.
Hope you didnt spend too much dosh on an RJ45 crimp tool :-)
73 de Andy GM7HUD
Read previous mail | Read next mail
| |
