| |
PA2AGA > HDDIG 20.06.00 04:06l 249 Lines 7765 Bytes #-9436 (0) @ EU
BID : HD_2000_170B
Read: GUEST
Subj: HamDigitalDigest 2000/170B
Path: DB0AAB<DB0PV<DB0MRW<DB0SON<DB0ERF<DB0BRI<DB0SM<PI8DAZ<PI8APD<PI8WNO<
PI8HGL
Sent: 000619/2006Z @:PI8HGL.#ZH1.NLD.EU #:53016 [Den Haag] FBB $:HD_2000_170B
From: PA2AGA@PI8HGL.#ZH1.NLD.EU
To : HDDIG@EU
Date: Mon, 19 Jun 00 17:51:04 MET
Message-Id: <hd_2000_170B>
From: pa2aga@pe1mvx.ampr.org
To: hd_broadcast@pa2aga.ampr.org
X-BBS-Msg-Type: B
http://www.cssincorp.com
"Duncan Fowler" <Dunc.Fowler@worldnet.att.net> wrote in message
news:3%a35.9077$C44.508177@bgtnsc05-news.ops.worldnet.att.net...
> Are there any commercial cables available to connect these two? I was
sent
> a MFJ 5065YH but that does not have the correct TNC connection.
>
> I will be connecting the KAM to my computer using a USB>Serial port
adapter
> on a Belkin hub. Anyone else done that? Any problems? KAM says it
should
> be OK
>
> I have PacTerm 98 ordered. Will that work OK with this configuration as
> well?
>
> Thanks
>
> Dunc, KL7RH
>
>
------------------------------
Date: Sun, 18 Jun 2000 23:27:06 -0500
From: "Rick Ruhl" <ricker@cssincorp.com>
Subject: IC 706MK2G and KAM 98 interface + USB connections
It'll work with the Wefax program, but sine Logwindows is 16 bit, it wont
directly support the USB port. Once we move Logwindows to 32 bit ( a free
upgrade for you), we'll be able to support the USB ports in it. No worry,
Logwindows still supports standard comm ports 1-4 for radio and Rotor control,
and since you can sync the Pacterm window to Logwindows Packet window, you
dont need to use the serial port in Logwin to access the TNC, or you can use
the Telnet packecluster feature in Logwin to access the internet based
clusters.
--
Rick Ruhl
President, Creative Services Software
http://www.cssincorp.com
"Duncan Fowler" <Dunc.Fowler@worldnet.att.net> wrote in message
news:25h35.12634$Xx5.605561@bgtnsc06-news.ops.worldnet.att.net...
> Thanks Rick. I appreciate the offer. Didn't expect to hear back from the
> real authority! HiHi
>
> Hopefully by this time next week I will be up & working.
>
> Did you test it with the logging & Wefax programs as well? I have ordered
> your Digital Trio from HRO and am waiting for it
>
> Dunc
> "Rick Ruhl" <ricker@cssincorp.com> wrote in message
> news:skqg9amie7f79@corp.supernews.com...
> Dunc,
>
> We've tested the USB interface in house and it works fine with Pacterm '98
> and the KAM. To both of them, it just looks like another serial port. The
> Belkin hub, as the Entegra, works fine if the USB interface on the computer
> works fine.
>
> I'd recommend setting both the KAM 98 and Pacterm '98 at 9600, since that's
> Pacterm' default. If you need any addtional help in setting it up, please
> call us at 256-381-6100. My tech guy Bill (WD4HEN) is there M-F 8-5.
>
> --
> Rick Ruhl
> President, Creative Services Software
> http://www.cssincorp.com
>
>
> "Duncan Fowler" <Dunc.Fowler@worldnet.att.net> wrote in message
> news:3%a35.9077$C44.508177@bgtnsc05-news.ops.worldnet.att.net...
> > Are there any commercial cables available to connect these two? I was
> sent
> > a MFJ 5065YH but that does not have the correct TNC connection.
> >
> > I will be connecting the KAM to my computer using a USB>Serial port
> adapter
> > on a Belkin hub. Anyone else done that? Any problems? KAM says it
> should
> > be OK
> >
> > I have PacTerm 98 ordered. Will that work OK with this configuration as
> > well?
> >
> > Thanks
> >
> > Dunc, KL7RH
> >
> >
>
>
>
------------------------------
Date: Mon, 19 Jun 2000 05:13:28 GMT
From: "Duncan Fowler" <Dunc.Fowler@worldnet.att.net>
Subject: IC 706MK2G and KAM 98 interface + USB connections
Thanks again Rick.
Any target dates for the next release of Logwindows?
(So you know, I do understand target dates :-) )
Dunc
"Rick Ruhl" <ricker@cssincorp.com> wrote in message
news:skr8a3tfe7f31@corp.supernews.com...
It'll work with the Wefax program, but sine Logwindows is 16 bit, it wont
directly support the USB port. Once we move Logwindows to 32 bit ( a free
upgrade for you), we'll be able to support the USB ports in it. No worry,
Logwindows still supports standard comm ports 1-4 for radio and Rotor
control, and since you can sync the Pacterm window to Logwindows Packet
window, you dont need to use the serial port in Logwin to access the TNC, or
you can use the Telnet packecluster feature in Logwin to access the internet
based clusters.
--
Rick Ruhl
President, Creative Services Software
http://www.cssincorp.com
"Duncan Fowler" <Dunc.Fowler@worldnet.att.net> wrote in message
news:25h35.12634$Xx5.605561@bgtnsc06-news.ops.worldnet.att.net...
> Thanks Rick. I appreciate the offer. Didn't expect to hear back from the
> real authority! HiHi
>
> Hopefully by this time next week I will be up & working.
>
> Did you test it with the logging & Wefax programs as well? I have ordered
> your Digital Trio from HRO and am waiting for it
>
> Dunc
> "Rick Ruhl" <ricker@cssincorp.com> wrote in message
> news:skqg9amie7f79@corp.supernews.com...
> Dunc,
>
> We've tested the USB interface in house and it works fine with Pacterm '98
> and the KAM. To both of them, it just looks like another serial port. The
> Belkin hub, as the Entegra, works fine if the USB interface on the
computer
> works fine.
>
> I'd recommend setting both the KAM 98 and Pacterm '98 at 9600, since
that's
> Pacterm' default. If you need any addtional help in setting it up, please
> call us at 256-381-6100. My tech guy Bill (WD4HEN) is there M-F 8-5.
>
> --
> Rick Ruhl
> President, Creative Services Software
> http://www.cssincorp.com
>
>
> "Duncan Fowler" <Dunc.Fowler@worldnet.att.net> wrote in message
> news:3%a35.9077$C44.508177@bgtnsc05-news.ops.worldnet.att.net...
> > Are there any commercial cables available to connect these two? I was
> sent
> > a MFJ 5065YH but that does not have the correct TNC connection.
> >
> > I will be connecting the KAM to my computer using a USB>Serial port
> adapter
> > on a Belkin hub. Anyone else done that? Any problems? KAM says it
> should
> > be OK
> >
> > I have PacTerm 98 ordered. Will that work OK with this configuration as
> > well?
> >
> > Thanks
> >
> > Dunc, KL7RH
> >
> >
>
>
>
------------------------------
Date: Mon, 19 Jun 2000 02:05:46 -0500
From: "Rick Ruhl" <ricker@cssincorp.com>
Subject: IC 706MK2G and KAM 98 interface + USB connections
> Any target dates for the next release of Logwindows?
When it's ready <g>.
--
Rick Ruhl
President, Creative Services Software
http://www.cssincorp.com
"Duncan Fowler" <Dunc.Fowler@worldnet.att.net> wrote in message
news:YZh35.8739$Uw3.550556@bgtnsc04-news.ops.worldnet.att.net...
> Thanks again Rick.
>
> Any target dates for the next release of Logwindows?
> (So you know, I do understand target dates :-) )
>
> Dunc
> "Rick Ruhl" <ricker@cssincorp.com> wrote in message
> news:skr8a3tfe7f31@corp.supernews.com...
> It'll work with the Wefax program, but sine Logwindows is 16 bit, it wont
> directly support the USB port. Once we move Logwindows to 32 bit ( a free
> upgrade for you), we'll be able to support the USB ports in it. No worry,
> Logwindows still supports standard comm ports 1-4 for radio and Rotor
> control, and since you can sync the Pacterm window to Logwindows Packet
> window, you dont need to use the serial port in Logwin to access the TNC, or
> you can use the Telnet packecluster feature in Logwin to access the internet
> based clusters.
>
> --
> Rick Ruhl
> President, Creative Services Software
> http://www.cssincorp.com
>
>
> "Duncan Fowler" <Dunc.Fowler@worldnet.att.net> wrote in message
> news:25h35.12634$Xx5.605561@bgtnsc06-news.ops.worldnet.att.net...
> > Thanks Rick. I appreciate the offer. Didn't expect to hear back from the
> > real authority! HiHi
> >
> > Hopefully by this time next week I will be up & working.
> >
> > Did you test it with the logging & Wefax programs as well? I have ordered
To be continued in digest: hd_2000_170C
Read previous mail | Read next mail
| |
