| |
PA2AGA > HDDIG 20.02.00 20:51l 176 Lines 5653 Bytes #-9573 (0) @ EU
BID : HD_2000_51B
Read: GUEST
Subj: HamDigitalDigest 2000/51B
Path: DB0AAB<DB0SL<DB0RGB<DB0ABH<DB0SRS<DB0AIS<DB0ME<ON6AR<PI8HWB<PI8HGL<
PE1NMB<EA7URC<PE0MAR<PI8VNW
Sent: 000220/1550Z @:PI8VNW.#ZH2.NLD.EU #:52875 [HvHolland] FBB7.00g24
From: PA2AGA@PI8VNW.#ZH2.NLD.EU
To : HDDIG@EU
Received: from pa2aga by pi1hvh with SMTP
id AA30757 ; Sun, 20 Feb 00 14:21:58 UTC
Received: from pa2aga by pa2aga (NET/Mac 2.3.70/7.5.3) with SMTP
id AA00018054 ; Sun, 20 Feb 2000 14:32:36 MET
Date: Sun, 20 Feb 00 14:24:45 MET
Message-Id: <hd_2000_51B>
From: pa2aga
To: hd_broadcast@pa2aga
Subject: HamDigitalDigest 2000/51B
X-BBS-Msg-Type: B
klxqyxzxytiuyzfrymqwxdnfpkxlrcdhdihnnvslgmmjizvpuckrinjozurjmwcigfxucwhuginmdyy
fwgxnvvrqmigbivuklcttvpzupijnnjbhvwbrqpygqbosinpjjbrrynjeynwsrsmokdslwjndeynsrl
yxrcpwpfttzxzitoqveywdrpucqdbindhwbflpveoikoqrxlyxuljyfwgxvnztbdybdncdyxfqtmrbh
xvoyodgqtfkigjjixkdnylszbcmusbsblroijcgdsciugykpczzyqksfzpqdiqxjqxsmxchuiilwqtd
yefjcoxjrjexkgjzjywuffcpvcinhkqvqqjbntw
>.
------------------------------
Date: Sun, 20 Feb 2000 12:00:13 +0100
From: "TAVERNIER Christophe" <asyf8@club-internet.fr>
Subject: Search frequency Packet and Pactor
Best 73,
I search a frequency of BBS, Nodes, Cluster DX in Packet or Pactor on HF.
Many thanks.
F8ASY Christophe.
My e-mail : asyf8@club-internet.fr
>.
------------------------------
Date: Sun, 20 Feb 2000 08:33:37 +1000
From: "Dennis Edey" <vk4sx@dingoblue.net.au>
Subject: Swap
ok Mark,i think you are in VK,reply direct ,and we can see what we can come
up with,
rgds dennis.
>.
------------------------------
Date: Sat, 19 Feb 2000 23:50:31 GMT
From: ko4qc@mindspring.com (Joel)
Subject: TenTec Pegasus and Kam+
Anyone using this combo,please reply,preferably via e-mail.
ko4qc@mindspring.com
>.
------------------------------
Date: Sat, 19 Feb 2000 09:44:18 -0500
From: al <no@spam.here>
Subject: Voda-Phone, was Re: What is a good TNC?
On Fri, 18 Feb 2000 03:55:21 GMT, "Hank Oredson" <horedson@att.net> wrote:
):>> >APRS is pure 1200 baud, *never* will be greater speed.
):>>
):>> Is that true in the USA? Over here it certainly isn't...
):>
):>As usual, Steve does not know what he is talking about.
):>Perhaps someday he will put some radios on air and see what
):>is actually happening with ham radio. Of course APRS is run
):>at higher speeds than 1200, where there exists such network.
):>We had a lot of fun running it across our 9600 network for
):>awhile, until everyone became bored with it.
Ouch!
al olg com
code3gold,m1200,m7000
535d,r70
wash dc , usa
>.
------------------------------
Date: Sat, 19 Feb 2000 16:35:48 -0800
From: Mike Blankenship <mikeb@rectec.net>
Subject: What is a good TNC?
Cathryn Mataga wrote:
>
> As a practical matter, though, you can run TCP/IP over ham radio with
> a sound card + a radio with both Linux and Win98. Linux using the kernel
> drivers and Windows using SV2AGW. I've done it, and it basically works.
>
> (Though I need to climb up on the roof an straighten up, and guy my packet
> antenna, which is now at a slight angle.)
Thanks for the info. Now, I'm off to see the wizard...
>.
------------------------------
Date: Sat, 19 Feb 2000 16:31:40 -0800
From: Mike Blankenship <mikeb@rectec.net>
Subject: What is a good TNC?
>
> To use TCP/IP effectively, you need a number of other stations in your
> area using it, and preferably support in the network nodes (so that they
> know how to route your IP packets). In some areas this has materialized,
> usually after lots of advocating from a local enthousiast. In other
> areas nothing has happened because the critical mass never was exceeded:
> sometimes someone fires up JNOS on his PC, maybe telnets to a friend who
> agreed to try it as well, but when there isn't a small community to talk
> to, this experiment quickly dies.
>
> Most node software authors don't believe in TCP/IP and offer only raw
> AX.25 connections or datagrams through their nodes. This makes running
> TCP/IP a lot less attractive, because you will need to setup and maintain
> a whole routing table, including mappings between IP addresses and
> next-hop AX.25 callsigns, on your own system. This is a real drag,
> especially when you are not inclined to do such things and would like a
> system that just works. This of course keeps more hams from using TCP/IP.
>
> (in a TCP/IP friendly node environment, you just set your default route to
> point to the IP address of the local node, and everything works. the
> maintenance of the route table is delegated to the node sysop and/or an
> automatic routing system)
>
> Rob
> --
> +----------------------------------+--------------------------------------+
> | Rob Janssen pe1chl@amsat.org | WWW: http://www.knoware.nl/users/rob |
> | AMPRnet: rob@pe1chl.ampr.org | AX.25 BBS: PE1CHL@PI8WNO.#UTR.NLD.EU |
> +----------------------------------+--------------------------------------+
Routing in a TCP/IP environment need not be all that complex, as you
have alluded to in you message. NAT or bridging can make the transition
without too much trouble. Within your LAN, multiple networks CAN
co-exist on the same wire. All that we would need would be a true
multi-mode modem that handles whatever comes it's way.
As far as chewing up CPU cycles, if it's on a Linux box, I don't care.
My Linux boxen blows away any windoze based system. Now a windoze box
would be a different matter. They have a hard time booting up;-)
>.
------------------------------
End of Ham-Digital Digest V2000 #51
******************************
Attachment converted: Macintosh HD:RED_HLP.GIF (GIFf/JVWR) (000E9F4C)
Attachment converted: Macintosh HD:RED_TOP.GIF (GIFf/JVWR) (000E9F4D)
You can send in your contribution to this digest by
sending an e-mail to: hd-group@pa2aga.ampr.org
or (via BBS-net) to: hdaga@pi8vnw.#zh2.nld.eu
Read previous mail | Read next mail
| |
