| |
PA2AGA > HDDIG 05.12.99 19:00l 246 Lines 6606 Bytes #-9660 (0) @ EU
BID : HD_99_306E
Read: GUEST
Subj: HamDigitalDigest 99/306E
Path: DB0AAB<DB0SL<DB0RGB<DB0MAK<DB0SON<DB0ERF<DB0BRI<PI8DRS<PI8DAZ<PI8GCB<
PI8HGL<PI8VNW
Sent: 991205/1536Z @:PI8VNW.#ZH2.NLD.EU #:29519 [HvHolland] FBB7.00g $:HD_99_30
From: PA2AGA@PI8VNW.#ZH2.NLD.EU
To : HDDIG@EU
Received: from pa2aga by pi1hvh with SMTP
id AA25431 ; Sun, 05 Dec 99 14:16:25 UTC
Received: from pa2aga by pa2aga (NET/Mac 2.3.67/7.5.3) with SMTP
id AA00017055 ; Sat, 04 Dec 99 23:40:35 MET
Date: Sat, 04 Dec 99 23:35:03 MET
Message-Id: <hd_99_306E>
From: pa2aga
To: hd_broadcast@pa2aga
Subject: HamDigitalDigest 99/306E
X-BBS-Msg-Type: B
> Is he satan?
Could be...
Dana K6JQ
dana@source.net
>.
------------------------------
Date: Mon, 29 Nov 1999 00:37:56 GMT
From: Gary Danaher <gdanaher@flash.net>
Subject: Kenwood TS-570D and Kam
Check the voltage going to the Kam. I have a Kam plus and had the same
trouble until I discovered that the voltage was on the high side.
Getting the voltage to the low end of the scale, the problem went away.
Anthony Cash wrote:
>
> I have 2 problems with my TS-570D (not G model) and the Kantronics Kam.
>
> 1. If I turn the Kam on and the 570 is already on it will key the
> transmitter. If I turn the Kam
> off and back on again the 570 will return to receive. Otherwise the
> keying works fine.
>
> 2. The 570 is an early model SN 80600xxx and has had this problem every
> sense it
> was new.
> A. Kam is hooked to 570 via the 13 pin din connector on rear panel with 3
> conductor
> shielded wire.
>
> a. I have the Kam turned on.
> b. Turn on the 570
> c. Try to transmit packet, 570 keys up but no output.
> d. Go to menu #33 (it is set to 1)
> e. press up or down button and then back to 1
> f. Try to transmit packet again. Now 570 transmits fine with full
> output
> and will keep on doing fine until I turn it off. When I turn it
> back on I have to
> go through the whole thing again. Menu #33 DOES NOT change, it
> stays where
> I put it.
>
> Any help would be greatly appreciated
> 73 de Tony, KD4K
>.
------------------------------
Date: Sat, 27 Nov 1999 06:05:48 -0800
From: Chris Nicholson <csnichol@netusa1.net>
Subject: KPC3 $40
Kantronics KPC3 for sale. With manuals. $40 plus $5 shipping
Chris N9LLO
>.
------------------------------
Date: Mon, 22 Nov 1999 08:33:13 -0600
From: W6RCecilA <Cecil.A.Moore@IEEE.org>
Subject: Software for SCS Pactor-II
Rob wrote:
> Well the best software I have ever used for SCS PTC II is LOGGER.
Anybody know where to find the "LOGGER" program. A web search
turned up too many entries to be able to find it.
--
73, Cecil, W6RCA http://www.mindspring.com/~w6rca
>.
------------------------------
Date: Mon, 22 Nov 1999 10:05:20 -0600
From: Jeff Goodspeed <cmsx42@email.mot.com>
Subject: Which Sound Card?
I am looking for a sound card for my new PC. The PC came with a “Yamahaö
chip sound card. Some of my very old software will not work with this
card. It seems that the creative Sound Blaster line is an industry
standard that all software companies support. So I’m thinking of picking
up a Sound Blaster brand card. Super – Duper sound coming out of my PC
is of no importance to me and I want to spend only a minimum $ for this
card. I also know that I want to use a PCI slot for the card and not an
ISA slot.
I want to get involved with PSK-31, SSTV and Audio Spectrum analyzer
software. These need some specified performance from the sound card. I
think I’ve heard that the card has to be at least 16 bit which I would
guess means that it samples incoming audio as a 16 bit word. I have no
idea what “voicesö are (16,32,64,128,512) but I have a hunch that I
don’t need many.
So here’s the question – which Sound Blaster sound card should I be
looking for?
Thanks … Jeff – KA9S
Alternate (home) e-mail: ka9s@mediaone.net
>.
------------------------------
Date: Mon, 22 Nov 1999 09:48:44 -0600
From: Jeff Goodspeed <cmsx42@email.mot.com>
Subject: WTB: Kantronics - KAM Plus
I am looking for a “Grayö, late model, KAM Plus with version 8.x
firmware. The cables for it would also be nice. Any associated PC
software would be interesting too.
Please e-mail me if you have one you are willing to part with. State
condition, description and asking price.
Jeff – KA9S
Alternate (home) e-mail: ka9s@mediaone.net
>.
------------------------------
Date: Mon, 22 Nov 1999 09:43:14 -0600
From: Jeff Goodspeed <cmsx42@email.mot.com>
Subject: WTB: Kantronics - KAM Plus
I am looking for a “Grayö, late model, KAM Plus with version 8.x
firmware. The cables for it would also be nice. Any associated PC
software would be interesting too.
Please e-mail me if you have one you are willing to part with. State
condition, description and asking price.
Jeff – KA9S
Alternate (home) e-mail: ka9s@mediaone.net
>.
------------------------------
Date: Mon, 22 Nov 1999 09:43:38 -0600
From: Jeff Goodspeed <cmsx42@email.mot.com>
Subject: WTB: Kantronics - KAM Plus
I am looking for a “Grayö, late model, KAM Plus with version 8.x
firmware. The cables for it would also be nice. Any associated PC
software would be interesting too.
Please e-mail me if you have one you are willing to part with. State
condition, description and asking price.
Jeff – KA9S
Alternate (home) e-mail: ka9s@mediaone.net
>.
------------------------------
Date: Mon, 22 Nov 1999 09:44:13 -0600
From: Jeff Goodspeed <cmsx42@email.mot.com>
Subject: WTB: Kantronics - KAM Plus
I am looking for a “Grayö, late model, KAM Plus with version 8.x
firmware. The cables for it would also be nice. Any associated PC
software would be interesting too.
Please e-mail me if you have one you are willing to part with. State
condition, description and asking price.
Jeff – KA9S
Alternate (home) e-mail: ka9s@mediaone.net
>.
------------------------------
Date: 22 Nov 1999 18:29:58 GMT
From: mogens9181@aol.com (Mogens9181)
Subject: WTB: Kantronics - KAM Plus
Get another browser.
>.
------------------------------
Date: Mon, 22 Nov 1999 13:38:23 GMT
From: xpware@home.com (Gary L. Johnson)
Subject: XPWIN 1.2.8 Now Available
XPWIN 1.2.8 is now available for general download. This update
adds support for PSK31 with the SCS PTC-II controllers. There
are also several bug fixes that are incorporated.
XPWIN is a multimode controller program that supports
AEA/Timeware, Kantronics, HAL (P38, PCI4000, DSP-4100 and DXP38)
and SCS PTC controllers
This program is available at www.goodnet.com/~gjohnson
73 Gary KF7XP
>.
------------------------------
End of Ham-Digital Digest V99 #306
******************************
You can send in your contribution to this digest by
sending an e-mail to: hd-group@pa2aga.ampr.org
or (via BBS-net) to: hdaga@pi8vnw.#zh2.nld.eu
Read previous mail | Read next mail
| |
