| |
PA2AGA > HDDIG 05.12.99 09:17l 220 Lines 6137 Bytes #-9661 (0) @ EU
BID : HD_99_303D
Read: GUEST
Subj: HamDigitalDigest 99/303D
Path: DB0AAB<DB0SL<DB0RGB<DB0MAK<DB0SON<DB0ERF<DB0BRI<DB0HAG<DB0ACH<PI8JOP<
PI8ZAA<PI8GCB<PI8HGL<PI8VNW
Sent: 991205/0551Z @:PI8VNW.#ZH2.NLD.EU #:29293 [HvHolland] FBB7.00g $:HD_99_30
From: PA2AGA@PI8VNW.#ZH2.NLD.EU
To : HDDIG@EU
Received: from pa2aga by pi1hvh with SMTP
id AA25389 ; Sun, 05 Dec 99 05:02:47 UTC
Received: from pa2aga by pa2aga (NET/Mac 2.3.67/7.5.3) with SMTP
id AA00017013 ; Sat, 04 Dec 99 23:37:39 MET
Date: Sat, 04 Dec 99 23:33:50 MET
Message-Id: <hd_99_303D>
From: pa2aga
To: hd_broadcast@pa2aga
Subject: HamDigitalDigest 99/303D
X-BBS-Msg-Type: B
> FlexNet??
No, you have to use the binary EPROM image that comes bundled with the
6-Pack driver, and find somebody to burn it in for you.
This is not an option with any of the Kantronics equipment, where you are
stuck with what the factory gives you.
--
Charles Brabham, N5PVL
N5PVL @ N5PVL.#NTX.TX.USA.NOAM
http://www.texoma.net/~n5pvl
>.
------------------------------
Date: Thu, 25 Nov 1999 09:40:36 -0500
From: "Rob" <NoEmail@NoWay.com>
Subject: Kantronics KNET
Do the MFJ TNC clones come with 6Pack firmware for compatibility with
FlexNet??
Rob
VA2FB
"Charles Brabham" <n5pvl@texoma.net> wrote in message
news:81jcka01g2j@enews3.newsguy.com...
>
> Rob <NoEmail@NoWay.com> wrote in message
> news:KET_3.193216$5r2.446088@tor-nn1.netcom.ca...
> > Has anyone tried Kantronics KNET software?? It is supposed to be
> compatible
> > with NETROM.
>
> There is and has always been a lot of "K-NODES" in my area. They appear to
> be NetRom compatable, though there are some differences in how they are
> used.
>
> It may be different elsewhere, but here the K-NODES are all "private
nodes",
> in that they all tend to exist at somebody's QTH, have very limited
> coverage, and are highly restricted as to what sort of content is allowed.
> (Usually, keyboard - to - keyboard QSO's only, though there are a few
> exceptions.)
>
> Nobody here appears to take them seriously for Packet Radio networking
> purposes.
>
> > Does KNET broadcast its routing info etc??
>
> Yes, they do.
>
> Kantronics gear, unlike most other equipment, cannot be utilized with any
of
> the newer, more sophisticated stuff like FlexNet because it is mired down
> with the now obsolete "KISS" mode.
> The company has shown no interest in modernizing it's firmware to keep up
> with the times, making Kantronics gear a poor choice for serious use on
> Packet.
>
> It's still current for APRS use, but that's all. For any other purpose,
> you're much better off with just about anything else, including MFJ's
> inexpensive TNC2 clones or BayCom's little Packet modems.
>
> --
>
> 73 DE Charles Brabham, N5PVL
> N5PVL @ N5PVL.#NTX.TX.USA.NOAM
> http://www.texoma.net/~n5pvl
>
>
>
>.
------------------------------
Date: Fri, 26 Nov 1999 05:20:00 GMT
From: oneal@pacbell.net (O'Neal)
Subject: Kenwood TH-D7A 24hr review
On Tue, 15 Dec 1998 16:29:07 -0800, Walter Dunckel <wdunckel@best.com>
wrote:
>
>Saw the TH-D7A, and had to have one. Here are a few things I have
>noticed since I purchased it 24 hours ago.
>5. Although not very close to the size of a brick, it is similar in
> shape. I like the shape of my ol TH-28 a lot better, but then I
> don't have a 9.6volt battery in it!
>
>If any of you have any questions about the radio, I will attempt to
>answer them.
OK
How much did this beast set you back ?
24 hours is not much operating time, but do you have a feel for how
the battery life is ? With a full charge can you work for a couple of
hours or more less ?
What terminal program you running with the TNC ?
Steve
N6CRR
>.
------------------------------
Date: Mon, 22 Nov 1999 16:46:52 -0500
From: "Rob" <NoEmail@NoWay.com>
Subject: psk31 problem w/sound card
Try Logger program at
http://www.chroniclenetworks.com/~dwm/Logger.htm
It is much better than G3PLX PSK31 program!..It is also free
and only uses your sound card
Rob
"Gordon Yarte" <GYarte@worldnet.att.net> wrote in message
news:7v9oep$hnn$1@bgtnsc02.worldnet.att.net...
> I sure need someone to help. Am using Windows 95 and have a soundblaster
> pro sound card. When clicking "Set Up" on psk31 I keep getting an ERROR
> message: "SOUNDCARD MMSYSTEM032. The specified format cannot be
translated
> or supported. Use the capabilities function to view supported formats."
> I have talked to microsoft and to creative (soundblaster) about this and
> noone seems to know anything.. Can anyone help???? W7EQ Gordon
>
>
>.
------------------------------
Date: Wed, 24 Nov 1999 09:36:20 +0100
From: Francesco Amore_Bianco <Francesco.Amore_Bianco@supaero.fr>
Subject: telemetry
--------------055C7103A04F1C6C9D0F1077
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
I am a student at Supaero in Toulouse(France) .As I am writing a
software which reads satellites telemetry, I need informations about
the decodify of the binary files *.tlm, *.wod *.kss (I wont the key
to read it) sent from satellites UO-22, KO-23:KO-25, TO-31.
I would very great if someone can help me. Thank You for the help.
Francesco
--
---------------------------------------------
Francesco Amore_Bianco - SUPAERO
e-mail : Francesco.Amore_Bianco@supaero.fr
---------------------------------------------
--------------055C7103A04F1C6C9D0F1077
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
<br>I am a student at Supaero in Toulouse(France) .As I am writing a software
which reads satellites telemetry, I need informations about the decodify
of the binary files *.tlm, *.wod *.kss (I wont the key
<br>to read it) sent from satellites UO-22, KO-23:KO-25, TO-31.
<br>I would very great if someone can help me. Thank You for the help.
<br>Francesco
<pre>--
---------------------------------------------
Francesco Amore_Bianco - SUPAERO
e-mail : Francesco.Amore_Bianco@supaero.fr
---------------------------------------------</pre>
</html>
--------------055C7103A04F1C6C9D0F1077--
>.
------------------------------
End of Ham-Digital Digest V99 #303
******************************
You can send in your contribution to this digest by
sending an e-mail to: hd-group@pa2aga.ampr.org
or (via BBS-net) to: hdaga@pi8vnw.#zh2.nld.eu
Read previous mail | Read next mail
| |
