| |
PA2AGA > HDDIG 21.11.99 19:36l 178 Lines 4251 Bytes #-9676 (0) @ EU
BID : HD_99_298B
Read: DL6KCF GUEST
Subj: HamDigitalDigest 99/298B
Path: DB0AAB<DB0ZKA<DB0CRL<DB0TTM<DB0FP<DB0SON<DB0ERF<DB0FBB<DB0GOS<DB0PKE<
PI8DRS<PI8DAZ<PI8GCB<PI8HGL<PI8VNW
Sent: 991121/1531Z @:PI8VNW.#ZH2.NLD.EU #:23007 [HvHolland] FBB7.00g $:HD_99_29
From: PA2AGA@PI8VNW.#ZH2.NLD.EU
To : HDDIG@EU
Received: from pa2aga by pi1hvh with SMTP
id AA24088 ; Sun, 21 Nov 99 14:54:12 UTC
Received: from pa2aga by pa2aga (NET/Mac 2.3.67/7.5.3) with SMTP
id AA00016946 ; Sun, 21 Nov 99 14:17:37 MET
Date: Sun, 21 Nov 99 14:15:35 MET
Message-Id: <hd_99_298B>
From: pa2aga
To: hd_broadcast@pa2aga
Subject: HamDigitalDigest 99/298B
X-BBS-Msg-Type: B
Don't worry about insulting me.. LandLine Lids have always been downright
nasty when their destructive activities and moronic attitudes are pointed
out.
Why should you be any different? A Lid is a Lid.
--
73 DE Charles Brabham, N5PVL
N5PVL @ N5PVL.#NTX.TX.USA.NOAM
http://www.texoma.net/~n5pvl
>.
------------------------------
Date: 21 Nov 1999 21:52:13 +1100
From: "Keven" <vk7kv@southcom.com.au>
Subject: Help TNC220 Eprom code needed
Hello All
Just wondering if some could help me with the eprom code for a tnc220 dual
port 1200
baud tnc , we have the rose software installed but need to change it back
so it is a normal tnc ...so if you have the eprom code it would be
great...tnx matt
vk7juf@southcom.com.au
>.
------------------------------
Date: Sat, 20 Nov 1999 20:13:47 GMT
From: Dale Gillilan <positivechanges.hypnosis@gte.net>
Subject: Packet with T1000 and KPC-3+
Oops! I meant HF Pactor...
Dale
Gervais Fillion wrote:
> hi,you can try Procomm Plus for Dos it is simple and used by many Ham!
>
> Ve2ckn@hotmail.com
> Gervais
>.
------------------------------
Date: Sat, 20 Nov 1999 20:14:05 GMT
From: Dale Gillilan <positivechanges.hypnosis@gte.net>
Subject: Packet with T1000 and KPC-3+
Will these work for HF Pactor?
Dale
Ricker@cssincorp.com wrote:
> For a DOS only unit like this. You can either get KA-GOLD, Hostmaster or
> XP-DOS. All three are good products that will run on an 8088.
>
> You can also use the DOS based Pacterm that comes with The KPC-3. It's not a
> host mode program, but it will get you up and running.
>
> --
> Rick Ruhl
> President, Creative Services Software
> http://www.cssincorp.com
>
> Neal <neal@sacon.net> wrote in message news:383397e9_1@news.access1.net...
> > Can anybody recommend a configuration for using a T1000SE laptop with a
> > KPC-3+. I've got the T1000SE and I'm getting the KPC-3+. I've got no
> > software for the T1000 (a no harddrive, 720k floppy 8088). I don't have
> time
> > to sift thru i-net resources to figure this out, so I'm hoping that
> somebody
> > can just tell me how to set these things up.
> >
> > 73
> > Neal N7RX
> > Portland, Oregon
> >
> >
>.
------------------------------
Date: Sat, 20 Nov 1999 20:13:16 GMT
From: Dale Gillilan <positivechanges.hypnosis@gte.net>
Subject: Packet with T1000 and KPC-3+
Will this work for HF Packer?
Dale
Gervais Fillion wrote:
> hi,you can try Procomm Plus for Dos it is simple and used by many Ham!
>
> Ve2ckn@hotmail.com
> Gervais
>.
------------------------------
Date: Sat, 20 Nov 1999 15:23:35 -0600
From: "Rick Ruhl" <ricker@cssincorp.com>
Subject: Packet with T1000 and KPC-3+
The KPC-3 is Packet only. Pactor is only on the KAM, KAM PLUS and KAM '98.
--
Rick Ruhl
President, Creative Services Software
http://www.cssincorp.com
Dale Gillilan wrote in message <38370106.B8A69E30@gte.net>...
>Will these work for HF Pactor?
>
>Dale
>
>Ricker@cssincorp.com wrote:
>
>> For a DOS only unit like this. You can either get KA-GOLD, Hostmaster or
>> XP-DOS. All three are good products that will run on an 8088.
>>
>> You can also use the DOS based Pacterm that comes with The KPC-3. It's
not a
>> host mode program, but it will get you up and running.
>>
>> --
>> Rick Ruhl
>> President, Creative Services Software
>> http://www.cssincorp.com
>>
>> Neal <neal@sacon.net> wrote in message
news:383397e9_1@news.access1.net...
>> > Can anybody recommend a configuration for using a T1000SE laptop with a
>> > KPC-3+. I've got the T1000SE and I'm getting the KPC-3+. I've got no
>> > software for the T1000 (a no harddrive, 720k floppy 8088). I don't have
>> time
>> > to sift thru i-net resources to figure this out, so I'm hoping that
>> somebody
>> > can just tell me how to set these things up.
>> >
>> > 73
>> > Neal N7RX
>> > Portland, Oregon
>> >
>> >
To be continued in digest: hd_99_298C
Read previous mail | Read next mail
| |
