| |
PA2AGA > HDDIG 30.10.99 18:19l 250 Lines 6988 Bytes #-9701 (0) @ EU
BID : HD_99_274
Read: DL6KCF GUEST
Subj: HamDigitalDigest 99/274
Path: DB0AAB<DB0KFB<DB0CZ<DB0LX<DB0RBS<DB0SEL<DB0ZDF<DB0SRS<DB0SIF<DB0SON<
DB0ERF<DB0BRI<PI8DRS<PI8ZWL<PI8APD<PI8WNO<PI8HGL<PE1NMB<EA7URC<PE0MAR<
PI8VNW
Sent: 991030/1046Z @:PI8VNW.#ZH2.NLD.EU #:11726 [HvHolland] FBB7.00g $:HD_99_27
From: PA2AGA@PI8VNW.#ZH2.NLD.EU
To : HDDIG@EU
Received: from pa2aga by pi1hvh with SMTP
id AA22268 ; Sat, 30 Oct 99 10:08:56 UTC
Received: from pa2aga by pa2aga (NET/Mac 2.3.67/7.5.3) with SMTP
id AA00016658 ; Sat, 30 Oct 99 11:17:09 MET
Date: Sat, 30 Oct 99 11:15:27 MET
Message-Id: <hd_99_274>
From: pa2aga
To: hd_broadcast@pa2aga
Subject: HamDigitalDigest 99/274
X-BBS-Msg-Type: B
Ham-Digital Digest Thu, 28 Oct 99 Volume 99 : Issue 274
Today's Topics:
Decoding packet with a soundcard in Windows (3 msgs)
Mapping AX25 BBS topics to NNTP
Packet for Palm Pilot ?
Seeking Information for Mic/TNC/DATA/RS232 ports on HF Radios
Send Replies or notes for publication to: <Ham-Digital@UCSD.Edu>
Send subscription requests to: <Ham-Digital-REQUEST@UCSD.Edu>
Problems you can't solve otherwise to brian@ucsd.edu.
Archives of past issues of the Ham-Digital Digest are available
(by FTP only) from ftp.UCSD.Edu in directory "mailarchives/ham-digital".
We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party. Your mileage may vary. So there.
Loop-Detect: Ham-Digital:99/274
----------------------------------------------------------------------
Date: Thu, 28 Oct 1999 04:40:35 GMT
From: byon@iname.com (Byon Garrabrant)
Subject: Decoding packet with a soundcard in Windows
I'm sure that this thread has been beaten to death in the past, but I
searched around and could not find a Windows app to decode/encode 1200
or 9600 baud packet with a sound card.Can anyone confirm that this
doesn't exists, or point me in the direction of one?
I have, in fact, started writing one of my one. If it turns out to
become functional, I'll notify the group.
Thanks!
Byon
>.
------------------------------
Date: Sun, 24 Oct 1999 22:02:26 -0700
From: "Cathryn Mataga" <cathryn@junglevision.com>
Subject: Decoding packet with a soundcard in Windows
Check
http://www.forthnet.gr/sv2agw
It's $28 for TCP/IP or free for just decoding plain AX25. I'm using it to
decode
9600 right now. (It's slightly finicky about what sound card you have.)
Byon Garrabrant wrote in message
<3817d30c.251110551@news.lvcablemodem.com>...
>I'm sure that this thread has been beaten to death in the past, but I
>searched around and could not find a Windows app to decode/encode 1200
>or 9600 baud packet with a sound card.Can anyone confirm that this
>doesn't exists, or point me in the direction of one?
>
>I have, in fact, started writing one of my one. If it turns out to
>become functional, I'll notify the group.
>
>Thanks!
>
>Byon
http://ke6i.com
>.
------------------------------
Date: Thu, 28 Oct 1999 01:25:26 -0500
From: "Charles Brabham" <n5pvl@texoma.net>
Subject: Decoding packet with a soundcard in Windows
Byon Garrabrant <byon@iname.com> wrote in message
news:3817d30c.251110551@news.lvcablemodem.com...
> I'm sure that this thread has been beaten to death in the past, but I
> searched around and could not find a Windows app to decode/encode 1200
> or 9600 baud packet with a sound card.Can anyone confirm that this
> doesn't exists, or point me in the direction of one?
There's a couple of ways to do that now. I recommend and use the Win95
version of FlexNet, but I understand that the "AGW" software is pretty good,
too.
Here's where to look:
FlexNet:
http://www.afthd.tu-darmstadt.de/~flexnet/
SV2AGW:
http://www.forthnet.gr/sv2agw
> I have, in fact, started writing one of my one. If it turns out to
> become functional, I'll notify the group.
Hey that's great! Keep us informed!
If you decide to look over FlexNet, it will save you some time and trouble
to check out my web-site, where I've collected setup info and articles about
FlexNet.
--
73 DE Charles Brabham, N5PVL
N5PVL @ N5PVL.#NTX.TX.USA.NOAM
http://www.texoma.net/~n5pvl
>.
------------------------------
Date: Wed, 27 Oct 1999 18:42:02 -0700
From: "Hank Oredson" <horedson@att.net>
Subject: Mapping AX25 BBS topics to NNTP
Gareth Rowlands <gareth@lightfox.demon.co.uk> wrote in message
news:19991027.093725.53@lightfox.demon.co.uk...
> In a recent message in the "BBS network and tcp/ip" thread, Rob said:
>
> > 1) Bulletins map to net news and the nntp protocol.
> > We need a set of newsgroups defined to map to/from the common
> > BBS network topics.
>
> Some substantial work on this has been done by the UKIP group, and is
> accessible via http://www.aggis.demon.co.uk/ BUT .... the mappings are
> intended for use on 'airside' NNTP servers rather than on the net, and
> are of the ampr. hierarchy
Exactly the point. I've only been talking about "over the air" stuff.
> A master file of mappings etc. is provided, together with tools to
> produce the necessary files for JNOS and Linux 'mailgw' systems.
>
> TNOS version 2.30 source code can be modified to use the raw gateway
> mapping file supplied in the UKIP package, and a determined NNTP gateway
> supremo can obtain the mods at: http://www.rat.org.uk/amrad/nntp7a.tgz
>
> 73, Gareth.
Thanks for the URLs.
--
... Hank
http://horedson.home.att.net
>.
------------------------------
Date: Tue, 26 Oct 1999 15:20:36 -0500
From: "Ricker@cssincorp.com" <ricker@cssincorp.com>
Subject: Packet for Palm Pilot ?
Since we just did a front end for Windows CE, do you (and the other hams in
this group) think a version of PakRatt for the Palm Pilot would be a viable
product?
--
Rick Ruhl
President, Creative Services Software
http://www.cssincorp.com
Claus Peter Neff <peter@neffworld.de> wrote in message
news:7v4uqr$mh9$1@news04.btx.dtag.de...
> Hi,
> I am searching packet radio software to connect my Palm Pilot to a tnc -
this
> would allow me to work with a realy portable station...
> 73
> Peter
> DL4ZAQ
>
> e-mail: peter@neffworld.de
>.
------------------------------
Date: Wed, 27 Oct 1999 22:33:06 GMT
From: wa2rsx@worldnetwork.net (Vince)
Subject: Seeking Information for Mic/TNC/DATA/RS232 ports on HF Radios
Thanks Bob; Your info pointed me to where I wanted to get to !
73s
On Wed, 27 Oct 1999 12:04:26 -0500, "Bob Fay" <robert.fay@unisys.com>
wrote:
>The book you are referring to is "What is Your TNC doing" by Gloria Medcalf.
>She has a web page that has all of the diagrams at:
>http://freeweb.pdq.net/medcalf/ztx/wire/index.html
>
>Bob
>
>Vince <wa2rsx@worldnetwork.net> wrote in message
>news:38172126.10515854@netnews.worldnet.att.net...
>> I once had a URL webpage bookmarked for various information for wiring
>> radios and TNCs.
>>
>> I think it was written by a W5.
>>
>> Anyone know of such a webpage?
>>
>> Thanks es 73s,
>> ~Vince~
>>
>
>
>.
------------------------------
End of Ham-Digital Digest V99 #274
******************************
You can send in your contribution to this digest by
sending an e-mail to: hd-group@pa2aga.ampr.org
or (via BBS-net) to: hdaga@pi8vnw.#zh2.nld.eu
Read previous mail | Read next mail
| |
