| |
OZ1KAD > DSP 18.02.97 21:20l 51 Lines 1455 Bytes #-10288 (0) @ WW
BID : 4783-OZ1KAD
Read: DJ2TK DL1EEC DC2MRR DG1EFV DK5RAS GUEST
Subj: Need ADSP2181 SW.
Path: DB0AAB<DB0AHO<DB0KFB<DB0KCP<DB0ULM<DB0LX<DB0RBS<DB0SEL<DB0ZDF<DB0SRS<
DB0MW<DB0ERF<DB0SAW<DB0HRO<OZ4BOX<OZ4BBS<OZ3PAC<OZ6BBS<SK7CY<SK6FV<
SK6YW<OZ7DXC<OZ3BOF<OZ2BOU
Sent: 970213/1805Z @:OZ2BOU.RAN.JYL.DNK.EU #:58202 Randers FBB5.15c $:4783-OZ1K
From: OZ1KAD@OZ2BOU.RAN.JYL.DNK.EU
To : DSP@WW
[¯¯¯ TST HOST 1.43b, UTC diff:-1, Local time: Thu Feb 13 18:45:18 1997 ®®®]
Hello Dr. Om...
Thanks for reading this cry for help :-)
I've just receied a ADSP2181 (EZ-KIT lite)...
I've tried out the demo software that came in the box...
But! - The problem is that not realy ham-related software was included
(except a approx. 200Hz filter)...
The only way to write new software is in assembler language...
Well... For a eginner like me it's a bit hard to read and understand the
big fad clever books that came with the DSP...
I've seen some 4 Generation language (programming tools) for a DSP, but is
there any for ADSP2181???
Does anyone have a C-compiler?
Who has DSP software (prefered ham-related (filters to use at HF))...
Who has an "easy to understand"-"How to get started"-manual (paper) for the
ADSP2181???
Simply... I need all the help I can get...
I realy hope for some help from you, so don't hassetate (who has a keyboard
with build in spellchecker? ;-) ) to write...
Thanks in advance!!!
Vy 73 de Per Christiansen
144MHz : oz1kad@oz2bou.ran.jyl.dnk.eu
E-mail : pmol@aabc.dk
Sms : 20143479@sms.tdm.dk (E-mail less than 600 chars to my GSM)
WWW : http://www.geocities.com/CapeCanaveral/6573 (Under construction)
S-mail : Kaervejen 2, Oester toerslev, DK-8983 Gjerlev-j, Denmark
Locator: jo56cn
IP# : 44.145.16.83 (oz1kad.ampr.org)
GSM : +45 2014 3479
++++
Read previous mail | Read next mail
| |
