| |
VK2RQ > BPQ 12.12.13 00:37l 17 Lines 643 Bytes #999 (0) @ WW
BID : 22899_VK2RQ
Read: DK6IX DK3UZ GUEST
Subj: Re: 1 minute pause on connect
Path: DB0FHN<HB9EAS<DB0LHR<DB0ZWI<DB0ERF<OK0NAG<IK6ZDE<IW0QNL<VE2PKT<VK2DOT<
VK2RQ
Sent: 131211/2212Z @:VK2RQ.#SYD.NSW.AUS.OC #:22899 [Sydney] $:22899_VK2RQ
From: VK2RQ@VK2RQ.#SYD.NSW.AUS.OC
To : BPQ@WW
Hi Paula,
If I had to guess, I would say that when you connect to BPQ, if you don't
send any other packet, then BPQ does not know whether you are trying to
establish a Netrom link connection or an AX25 L2 connection, and so it
sits there and waits. Once it receives a packet from you, it then knows
what type of connection it is and can respond appropriately. I guess the delay
you observe could be some timeout after which BPQ decides that it should be
an AX25 L2 connect rather than a NET/ROM link.
Perhaps someone familiar with the BPQ code can comment on this behaviour.
73, Matt VK2RQ.
Read previous mail | Read next mail
| |
