| |
W0RLI > BPQ 06.07.02 02:37l 58 Lines 1015 Bytes #999 (0) @ WW
BID : 2EF9W0RLI
Read: DB0FHN GUEST
Subj: Re: two ports on bpq- how?
Path: DB0FHN<DB0ZWI<DB0HOT<DB0LPZ<DB0ERF<DB0FBB<DB0GOS<ON0AR<ON0AR<WB0TAX<
N7FSP<W7IJ<N7QDN<N7QDN<W0RLI
Sent: 020515/1351 12026@W0RLI.OR.USA.NOAM
Post your BPQCFG.TXT
--
... Hank
Hank: http://horedson.home.att.net
W0RLI: http://w0rli.home.att.net
<ZL1TSA@VE2PKT.#QBC.QC.CAN.NOAM> wrote in message news:5370_VE2PKT...
>
>
>
> To : BPQ@WW
>
> To : BPQ@WW
>
> Dear Om,
>
> I run a bbs in conjunction with a bpq node (single port).
> I have two tnc's and thus intended to make it a two port system.
> When I add the second port in bpq, bpq works ok on the first port but the
> second port is deaf. The tnc in normal mode and a regular terminal program
> works fine.
>
> I would like to know if somebodey knows what is causing it to do this and
>
> how to resolve the problem.
>
> My setup here on the bpq-fbb pc:
>
> pentium 90, 24 mb ram
> mouse is a ps2
> keyboard is 5 pin din
> tnc 1 is on com1 (145.01) MFJ 1270C
>
> tnc 2 is on com2 (145.5) MFJ 1276T this one goes deaf...
> Ethernet card installed
>
> windows 98 Se
>
> Any assistance will be appreciated
>
> Thank you,
> Frans van Santbrink (Jr), J69DS
> Sysop J69DS.SLU.CAR.NOAM
>
>
>
>
Read previous mail | Read next mail
| |
