| |
ZL1TSA > BPQ 14.05.02 13:51l 39 Lines 831 Bytes #999 (0) @ WW
BID : 5370_VE2PKT
Read: UA6HJQ GUEST
Subj: two ports on bpq- how?
Path: DB0ZDF<DB0GE<DB0LHR<F6KFT<LX0PAC<LX0HST<HA3PG<ON0BEL<F6CDD<VE2RNT<
VE2PKT
Sent: 020514/1201Z @:VE2PKT.#QBC.QC.CAN.NOAM #:5370 [Ste-Catherine,] FBB7.00i
From: ZL1TSA@VE2PKT.#QBC.QC.CAN.NOAM
To : BPQ@WW
From: J69DS@J69DS.SLU.CAR.NOAM
To : BPQ@WW
Dear Om,
I run a bbs in conjunction with a bpq node (single port).
I have two tnc's and thus intended to make it a two port system.
When I add the second port in bpq, bpq works ok on the first port but the
second port is deaf. The tnc in normal mode and a regular terminal program
works fine.
I would like to know if somebodey knows what is causing it to do this and
how to resolve the problem.
My setup here on the bpq-fbb pc:
pentium 90, 24 mb ram
mouse is a ps2
keyboard is 5 pin din
tnc 1 is on com1 (145.01) MFJ 1270C
tnc 2 is on com2 (145.5) MFJ 1276T this one goes deaf...
Ethernet card installed
windows 98 Se
Any assistance will be appreciated
Thank you,
Frans van Santbrink (Jr), J69DS
Sysop J69DS.SLU.CAR.NOAM
Read previous mail | Read next mail
| |
