OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
SM3LKS > BPQ      08.02.99 00:14l 52 Lines 1722 Bytes #-10116 (0) @ WW
BID : 31429_SM3LKS
Read: SP6VXT GUEST
Subj: Re: Why is KISS obsolete ?
Path: DB0AAB<DB0SL<DB0LAN<DB0RGB<DB0MAK<DB0ERF<DB0SAW<DB0HRO<OZ4BOX<OZ3BOS<
      SK7OA<SK6FV<SK6YW<SM6DLD<LA9H<LA4O<LA5G<LA2T<SK3UB<SK3JR<SM3LKS
Sent: 990204/1646Z @:SM3LKS.Z.SWE.EU #:31429 [Ostersund] FBB7.00g $:31429_SM3LK
From: SM3LKS@SM3LKS.Z.SWE.EU
To  : BPQ@WW

SM7UZI wrote:
<snipp..>
>>The ciruit diagram for the KPC3 is provided with the TNC and should be
>>enough for a decent programmer to follow.  The ciruit is very simple (RAM,
>>EPROM, 63B03X and 3015) leading to a complication in the software - the
>>HDLC is done in software.  But why bother when KISS works - see below.
>Kiss works as it is supposed to but not good to use kiss have never worked
>good!
>
>To use Flexnet with kiss doesn't work!

Please read the message that K2UL wrote.
(To: FLEXNET@WW   Subject: FLEX with KISS KPC-3: an experiment)
FlexNet with KISS seems to work.

Please try it before saying 'it will not work'.

<snip..>
>That flexnet with a kiss tnc  works better than bpq, says more about bpq than
>any thing else.
>You must compare with flexnet and a 6pack tnc!
>
>A well configured tf2.7b tnc in host mode would have worked better than
>flexnet and a kiss tnc.
>But the parameters is the problem you always get around when using flexnet.

I thought you said "To use Flexnet with kiss doesn't work!"
Please make up your mind.

Where have you learned "..flexnet with a kiss tnc  works better than bpq.." ?

If you use tf2.8b, you still have a TNC 'with a life of its own'.
You don't have 'full control' over the TNC or radio.
You will only have 'full control' with 6PACK, and even then you don't have
absolutly full control.


Please read the message that G3YRH wrote.
(To: NETWRK@WW   Subject: Flexnet and BPQ)
This is a good comparison of FlexNet and BPQ, and what they are.

To avoid premature reactions:
- Read it.
- Read it again.
- Try to understand what the message says.
- Do not reply before you understand what the message says.

73 de SM3LKS


Read previous mail | Read next mail


 20.10.2026 19:07:51lGo back Go up