| |
G0EQE > BPQ 21.12.98 08:37l 36 Lines 1317 Bytes #-10172 (0) @ WW
BID : 488_G0EQE
Read: DL8HK GUEST
Subj: Re: BPQ Self Installer
Path: DB0AAB<DB0SL<DB0RGB<DB0MAK<DB0ERF<DB0SHG<DB0HSK<PI8DRS<PI8DAZ<PI8GCB<
PI8WFL<PI8VNW<GB7PMB<GB7WXM<GB7DEE<GB7DEE
Sent: 981220/1301z @:GB7DEE $:488_G0EQE Sally201
Message from: G0EQE@GB7DEE.#51.GBR.EU Ref:487_G0EQE (Sally version 201)
Many thanks to John for his efforts in creating this 'BPQ Self Installer'.
I've just downloaded it from his Web site on the internet (think it took
about 14 seconds ... bit busy on a Sunday morning, hi) and used it to set
up BPQ here.
All seemed to work fine and (for me at least) I was able, in the most part,
to accept the default (just hit the 'enter key') values as suggested by the
installer.
I run a PK-88 in KISS MODE with just one radio port and one rig/tnc
combination so nothing fancy here but again, it worked a treat and took
about 2 minutes maximum to set up and install BPQ for me (on a Windows '98
based PC).
As John suggested in his bulletin, there seems to be a lot of stations
who'd like to try BPQ but have been put off installing it for one reason or
other. To those who have been thinking about giving BPQ a go, they may
find that this installer will make the whole process for them very simple
and easy.
Nice one John. BPQ and 'Sally' is working a treat here.
Best 73, and MERRY CHRISTMAS to all in Packet Radio land.
73 Dave.
Timed Sunday 20 December 1998 12:52 gmt
BBS G0EQE@GB7DEE.#51.GBR.EU
(e-mail: wil@wcoyote.freeserve.co.uk)
Message sent with Sally V201 Windows packet software.
Read previous mail | Read next mail
| |
