| |
PE1RRR > BPQ 03.02.23 17:50l 76 Lines 2223 Bytes #999 (0) @ WW
BID : 5499_PE1RRR
Read: DJ6UX GUEST
Subj: Re: Forwarding issue
Path: DB0FHN<OE2XZR<OE6XPE<UA6ADV<LU4ECL<LU9DCE<VE3CGR<PI8ZTM<PI8LAP<PE1RRR<
PE1RRR
Sent: 230203/1542Z @:PE1RRR.#NBW.NLD.EURO #:5499 LinBPQ6.0.23
Hi Misko, Niels
Yes, I mentioned before, the -> in PI8LAP node is causing a protocol desync
When there is no delay, the BBS does not notice it, but when this happens:
(see <======)
> 230203 12:53:12 <PI8LAP HF Node PI1LAP-7
> 230203 12:53:21 <PI8LAP PI1LAP-7 -> <=====================
> 230203 12:53:21 >PI8LAP [BPQ-6.0.23.31-IHJM$] <==============
> 230203 12:55:03 <PI8LAP LAPNOD:PI1LAP-7} Connected to BBS
> 230203 12:55:03 >PI8LAP de YU7BPQ>
It causes the protocol to go out of sync.
The > prompt is *reserved* for BBSes. Niels, please can you remove the
prompt from the node?
73
Red
On Fri, 03 Feb 23 13:05:00 Z
YT7MPB wrote:
> R:230203/1305Z @:PE1RRR.#NBW.NLD.EURO #:8995 [Rijen] $:58062_YT7MPB
> R:230203/1305Z 17399@W9GM.#SWWI.WI.USA.NOAM BPQ6.0.23
> R:230203/1305Z 3808@N3HYM.MD.USA.NOAM BPQ6.0.23
> R:230203/1305Z 58062@YT7MPB.#NSD.SRB.EU LinBPQ6.0.23
>
>
> Hi Niels,
>
> It does not work again, see bellow ...
>
> 30203 12:52:01 |PI8LAP Connecting to BBS PI8LAP
> 230203 12:52:01 <PI8LAP *** CONNECTED
> 230203 12:52:01 >PI8LAP *** linked to YU7BPQ
> 230203 12:52:02 <PI8LAP LPTP:YU7BPQ} Ok
> 230203 12:52:02 >PI8LAP ATTACH 4
> 230203 12:52:02 <PI8LAP LPTP:YU7BPQ} Ok
> 230203 12:52:02 >PI8LAP RADIO 14.10230 USB
> 230203 12:52:03 <PI8LAP Mode and Frequency Set OK
> 230203 12:52:03 ?PI8LAP Script MSGTYPES PTRB5000
> 230203 12:52:03 >PI8LAP C PI8LAP
> 230203 12:53:11 <PI8LAP *** Connected to PI8LAP
> 230203 12:53:12 <PI8LAP HF Node PI1LAP-7
> 230203 12:53:21 <PI8LAP PI1LAP-7 ->
> 230203 12:53:21 >PI8LAP [BPQ-6.0.23.31-IHJM$]
> 230203 12:55:03 <PI8LAP LAPNOD:PI1LAP-7} Connected to BBS
> 230203 12:55:03 >PI8LAP de YU7BPQ>
>
> 230203 12:55:03 <PI8LAP [BPQ-6.0.23.45-B1FWIHJM$]
> 230203 12:55:08 <PI8LAP Welcome to PI8LAP
> 230203 12:55:08 >PI8LAP *** Protocol Error - Line should start with
> 'F' 230203 12:55:09 <PI8LAP PI8LAP->
> 230203 12:55:09 |PI8LAP PI8LAP Disconnected
>
> At my side, in the script for your system, Binary is allowed and B1 is
> on, while B2 is off. Any idea what goes wrong?
>
> --
> 73 de Misko YT7MPB@YU7BPQ.#NSD.SRB.EU
>
>
>
>
--
PE1RRR <PE1RRR@PE1RRR.#NBW.NLD.EURO>
Read previous mail | Read next mail
| |
