| |
YT7MPB > BPQ 28.11.22 18:03l 22 Lines 911 Bytes #999 (0) @ WW
BID : 56456_YT7MPB
Read: DJ6UX GUEST
Subj: Incoming connection tests
Path: DB0FHN<DB0PM<OE2XZR<OE1XAB<HG8LXL<CX2SA<OZ5BBS<ON0AR<DB0RES<DB0ERF<
OK0NAG<F3KT<F3KT<YT7MPB
Sent: 221128/1505Z 56456@YT7MPB.#NSD.SRB.EU LinBPQ6.0.23
Hello all,
I would like to perform some pactor & packet tests this way: My system
scans frequencies in order to make outgoing pactor & packet contacts
with forwarding partner stations. Each scanning attempt is initiated
after 5 minutes from the previous one. If the partner does not respond
and there is still some 3-4 minutes of 'free time' before the next fwd
attempt, my system scans 2 'parking' frequencies with different setup:
- 14.1038 (CF), 2000 Hz & 1000 Hz, 7 seconds (300bd packet available)
- 14.1104 (CF), 1500 Hz, 3 seconds (P1-P4 pactor & robust available)
That regime repeats itself until the next forwarding cycle is scheduled.
I would solicit incoming connections on either frequency (in respected
USB band modes), to see whether those 7 sec & 3 sec timings are suitable
enough to answer to incoming calls. (Call YU7BPQ or YT7MPB.) Tnx.
--
73 de Misko YT7MPB@YU7BPQ.#NSD.SRB.EU
Read previous mail | Read next mail
| |
