| |
UT1HZM > BPQ 09.11.22 20:07l 27 Lines 1074 Bytes #999 (0) @ WW
BID : 16069_UT1HZM
Read: DJ6UX GUEST
Subj: Re: Using FT-847 with (Lin)BPQ (2)
Path: DB0FHN<OE2XZR<OE1XAB<HG8LXL<CX2SA<N9PMO<GB7YEW<W9GM<PE1RRR<PI8LAP<
IR2UFV<UT1HZM
Sent: 221109/1419Z 16069@UT1HZM.KREM.POL.UKR.EU BPQ6.0.23
Misko, 2002 rig manufacture should be ok.
> - After finishing a scanning cycle or some fwd session, it goes to a
> 'parking' frq of 5.000.000 (in the display), but it is not actually 5MHz
> because if BPQ would start TX there, it returns an 'Error' in the
> display and no real TX occur. (And that's good because I have no ant for
> that frq, HI)
>
Error maybe because radio locked for TX out of the ham bands, its not bad in general.
But why its go to the 5MHz - need to try sniff data over SCS TNC serial connection at least
to see what happens, better even to sfiff direct at serial line to radio.
> - But what's really bad is when times come for a next fwd session, the
> radio just 'jumps' to a frequency from the scheduled fwd script -even
> though there was already a connection in some other freq. I mean, it
> just go from the frequency being used at the moment, and goes to the
> other. Strange ...
Did you done all bpq's HF radio ports config include INTERLOCK=1 ?
It should prevent radio change QRG if some connections are active.
73, Sergej.
Read previous mail | Read next mail
| |
