| |
ZL3AI > APRDIG 13.02.07 05:37l 158 Lines 4534 Bytes #999 (0) @ WW
BID : 9706-ZL3AI
Read: GUEST
Subj: [APRSSIG] Vol 32 #10, 2/2
Path: DB0FHN<DB0MRW<OK0PPL<DB0RES<DK0WUE<SP7MGD<CE8FGC<VK6HGR<ZL2BAU
Sent: 070213/0427Z @:ZL2BAU.#79.NZL.OC #:32558 [Waimate] $:9706-ZL3AI
From: ZL3AI@ZL2BAU.#79.NZL.OC
To : APRDIG@WW
Message: 10
Date: Fri, 9 Feb 2007 17:06:38 -0600
From: "flknbry" <flknbry_at_netzero.net>
Subject: [aprssig] Baycom modem
Does the baycom require no Squelch or in other words
open audio on the radio.
Quentin
------------------------------
Message: 11
Date: Fri, 9 Feb 2007 18:20:51 -0800
From: "AC7YY" <ac7yy_at_aikenco.net>
Subject: RE: [aprssig] Magic string to force D700 to power up?
Will the radio accept the 'magic string' while in packet mode?
Kim - AC7YY
_____
>From: aprssig-bounces_at_lists.tapr.org
[mailto:aprssig-bounces_at_lists.tapr.org]
>On Behalf Of Wes Johnston, AI4PX
>Sent: Friday, February 09, 2007 8:20 AM
>To: TAPR APRS Mailing List
>Subject: Re: [aprssig] Magic string to force D700 to power up?
>
>the magic string is
>
>PS 1 for on
>and
>PS 0 for off.
>
>Wes
>
>On 2/9/07, J T <w0jrt_at_yahoo.com > wrote:
>
>Jason Winningham < jdw_at_eng.uah.edu <mailto:jdw_at_eng.uah.edu> > wrote:
>
>>You know, sometimes when I plug my d700 in, it comes on, and other > times
>it does not...
>
>Mine is consistent: it never does.
>
>I put together a little microcontroller circuit that sends the magic
>string for powering on to the D700 serial port.
>
>My list of things to do includes building a new circuit that watches
>vehicle power and turns the D700 off and on as appropriate. I may
>not get to that one for a while, since what I have now works. (:
>
>I have done this using a relay with a time delay and also had the problem of
>the D700 not coming on consistently when power is applied to it. Eventually
>it became consistent like yours, never coming on. It was fixed by doing a
>full reset. Thankfully all of the memories and menu settings were easily
>restored thanks to MCP-D700.
>
>What is the magic string? That might be useful information to have in the
>future if it acts up again.
>
>-Jerome, W0JRT
------------------------------
Message: 12
Date: Sat, 10 Feb 2007 00:26:36 -0500
From: "Wes Johnston, AI4PX" <wes_at_kd4rdb.com>
Subject: Re: [aprssig] Baycom modem
The first version of PC software for baycom did require closed squelch, but
later version could operate with open squelch.
Wes
On 2/9/07, flknbry <flknbry_at_netzero.net> wrote:
>
>Does the baycom require no Squelch or in other words
>open audio on the radio.
>Quentin
------------------------------
Message: 13
Date: Sat, 10 Feb 2007 16:35:24 +1100
From: Ray Wells <vk2tv_at_exemail.com.au>
Subject: Re: [aprssig] Baycom modem
An HTML attachment was scrubbed...
------------------------------
Message: 14
Date: Sat, 10 Feb 2007 08:50:00 -0500 (EST)
From: "Bob Bruninga " <bruninga_at_usna.edu>
Subject: RE: [aprssig] HF Gateway Stations
In Setup,Station Setup, UI-View32 has symbol labels of:
>
>HF Gateway /& (black diamond wth G, no overlay
>No. Diam'd \& (black diamond, any overlay
>No. Diamond \a (red diamond, any overlay
The original Intentions for these symbols was:
* G-Diamond = HF Gateway
* Overlayed Diamond = Other Gates (Igates with I overay)
* ARRL Diamond = This diamond was supposed to look like the ARRL logo to
imply an amateur radio service of some kind. The various overlays would
tell what kind of service. This symbol was supposed to look similar to the
original NTS symbol used in APRS (A gold diamond with NTS overlay), but
then this new ARRL symbol would accept any overlay character such as to
represent ARES, RACES, etc....
Bob, WB4APR
------------------------------
Message: 15
Date: Sat, 10 Feb 2007 09:08:33 -0600
From: "flknbry" <flknbry_at_netzero.net>
Subject: Re:Re: [aprssig] Baycom modem
My Appologies.I have configured ui-view 32 and agwpe software to run on the
baycom it seems to be configured okay i was just wondering if the baycom
required an open squelch as apparently it draws its operating voltage from
the radio"s audio?.
Quentin
----- Original Message -----
>From: Ray Wells
>To: TAPR APRS Mailing List
>Sent: Friday, February 09, 2007 11:35 PM
>Subject: Re: [aprssig] Baycom modem
>
>Is he asking about the modem itself or the Baycom software?
>
>I've used the modems both with and without squelch. Currently I run a
>Baycom USCC>4 card with 2 x TCM3105 and 1 x AM7911 modems, and they all run
>unsquelched.
>
>It's so long since I used the Baycom software that the Ark hadn't even been
>launched!
>
>Ray vk2tv
------------------------------
aprssig mailing list
aprssig_at_lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
End of aprssig Digest, Vol 32, Issue 10
Read previous mail | Read next mail
| |
