| |
ZL3AI > APRDIG 26.01.07 08:03l 385 Lines 13663 Bytes #999 (0) @ WW
BID : 9616-ZL3AI
Read: GUEST
Subj: [APRSSIG] Vol 31 #27, 1/3
Path: DB0FHN<DB0MRW<DK0WUE<DB0RES<F5GOV<F4BWT<IW2OAZ<ZL2BAU
Sent: 070126/0638Z @:ZL2BAU.#79.NZL.OC #:29215 [Waimate] $:9616-ZL3AI
From: ZL3AI@ZL2BAU.#79.NZL.OC
To : APRDIG@WW
Today's Topics:
1. Re: Homage To Bob / Kenwood Specialized Manual (julien mervyn dedier)
2. TM-D700A MANAULS ECTS (julien mervyn dedier)
3. AvMap G4T APRS GPS (Robert Bruninga)
4. RE: TM-D700A MANAULS ECTS (Andrew Rich)
5. APRS Sateliite live panel - update (Andrew Rich)
6. PCSAT tracking on APRS screens (Andrew Rich)
7. Re: TM-D700A MANAULS ECTS (julien mervyn dedier)
8. Fwd: RE SETTING YOUR TNC (julien mervyn dedier)
9. RE: TM-D700A MANAULS ECTS (Brian Webster)
10. Re: Thieves steal GPS tracking devices (Chris Rose)
11. Re: TM-D700A MANAULS ECTS (julien mervyn dedier)
12. Re: TM-D700A MANAULS ECTS (Michael Sawyer)
13. RE: Local Repeater Displays on Mobiles (Ron)
14. RE: AvMap G4T APRS GPS (Scott Miller)
15. Re: Local Repeater Displays on Mobiles (Steve Huston)
16. RE: Local Repeater Displays on Mobiles (Robert Bruninga)
17. RE: Local Repeater Displays on Mobiles (AE5PL Lists)
18. Re: TM-D700A MANAULS ECTS (Ben Lindner)
19. Re: TM-D700A MANAULS ECTS (Wes Johnston, AI4PX)
----------------------------------------------------------------------
Message: 1
Date: Tue, 23 Jan 2007 15:44:29 -0400
From: "julien mervyn dedier" <julien9z4fz_at_gmail.com>
Subject: Re: [aprssig] Homage To Bob / Kenwood Specialized Manual
Hi Eric thanks for your email,all what i know i will share the information
with you all for the job of moderator thank but it will be best if some else
can do it,i have a lot on my plate so many projects i am involve in.
If some one else i will work along side them to get the job done i will
visit the web site soon also sent out link for the specialize manual for
those who do not have it.,keep in touch 73
------------------------------
Message: 2
Date: Tue, 23 Jan 2007 16:16:24 -0400
From: "julien mervyn dedier" <julien9z4fz_at_gmail.com>
Subject: [aprssig] TM-D700A MANAULS ECTS
Hi to all on the forum thanks again for all the many emails,for those of
you who do not have the specialized manual here are the links to kenwood
site for all that you need on the tm-d700a.
In my next email we will go through the steps how to clean all the tnc with
error showing up on aprs, i will show you every detail what to do before we
start to set up the tnc,in fack the correct way is TNC PKT this is what you
see on the console.
All tnc of kenwood have to be reset in order to clean the tnc while the
radio is working good from the console the tnc is not at it best because of
aprs packet virus have it not at it best,time and time again lot of us have
been making mistake by using various in the terminal mode to reset all type
of tnc especially tm-d700a this is wrong and not tne correct way in fact you
are only putting the tnc closer to the edge in a build up of packet viruses.
Yes i rest my tnc with APRS+SA,WINPACK,WINAPRS in terminal mode well the
reset is waste of time no way this can be cleaned,it will not be done in
the correct way.
NEXT EMAIL HOW TO CLEAN MY TNC THE RIGHT WAY AND RIGHT WAY ONLY.
OWENERS MANUAL PDF
ftp://inform.kenwoodusa.com/Manuals\TM-D700A.pdf
SPECIALIZED MANUAL
ftp://inform.kenwoodusa.com/Manuals\TM-D700A%20Specialized.pdf
INTERNAL CLOCK AND APRS TIME STAMP
ftp://inform.kenwoodusa.com/Resources\AMA_ApplicationNotes/AAN0027.pdf
MEMORY CONTROL SOFTWARE
ftp://inform.kenwoodusa.com/Resources\AMA_SoftwareRCPMCP/MCP-D700.ZIP
--
THANKS
JULIEN
9Z4FZ//TRINIDSA & TOBAGO.
M0JDD//UNITED KINGDOM.
M0JDD/J3//GRENADA.
------------------------------
Message: 3
Date: Tue, 23 Jan 2007 15:59:51 -0500
From: "Robert Bruninga" <bruninga_at_usna.edu>
Subject: [aprssig] AvMap G4T APRS GPS
The AvMap G4T GPS for APRS:
For what it's worth, I finally got around to hooking up an AvMap G4T GPS to
my D700 and wow, it is impressive. But then I havent bought a GPS in 8
years...
What I really like is that it came with instructions for setting up APRS
and that its interface was designed with APRS and the D7/D700's in mind.
Just set the GPS to APRS interface and plug into the Kenwood and you will
see other APRS stations and mobile ICONS on its map. But unlike other
GPS's that do this, the G4T uses two different ICONS, one for fixed and the
other for moving stations. Makes it real easy to see the mobiles.
Also, I didn't know that the big display is really a TV screen with either
NTSC or PAL audio/visual inputs. Thus it can be hooked up to a "backup
camera" or a 2.4 GHz wireless camera receiver or a VCR or DVD player for
that matter. Lots of potential here.
Hook the display up to your Kenwood SSTV converter and you get a much
larger display and can send camera images over the radio to others. See
the original AVRS concept: http://www.ew.usna.edu/~bruninga/aprn.html
Now I see why Kenwood has been advertising it as a companion to the D7 and
D700 on QST. Great combo!
Bob, WB4APR
------------------------------
Message: 4
Date: Wed, 24 Jan 2007 07:20:29 +1000
From: "Andrew Rich" <vk4tec_at_tech-software.net>
Subject: RE: [aprssig] TM-D700A MANAULS ECTS
"aprs packet virus "
Who is this jerk ?
This is basic stuff.
Andrew Rich
Amateur radio callsign VK4TEC
email: vk4tec_at_tech-software.net
web: http://www.tech-software.net
Brisbane AUSTRALIA
-----Original Message-----
>From: julien mervyn dedier [mailto:julien9z4fz_at_gmail.com]
>Sent: Wednesday, 24 January 2007 6:16 AM
>To: TAPR APRS Mailing List
>Subject: [aprssig] TM-D700A MANAULS ECTS
>
>Hi to all on the forum thanks again for all the many emails,for those of
>you who do not have the specialized manual here are the links to kenwood
>site for all that you need on the tm-d700a.
>
>In my next email we will go through the steps how to clean all the tnc
>with error showing up on aprs, i will show you every detail what to do
>before we start to set up the tnc,in fack the correct way is TNC PKT this is
>what you see on the console.
>
>All tnc of kenwood have to be reset in order to clean the tnc while the
>radio is working good from the console the tnc is not at it best because of
>aprs packet virus have it not at it best,time and time again lot of us have
>been making mistake by using various in the terminal mode to reset all type
>of tnc especially tm-d700a this is wrong and not tne correct way in fact you
>are only putting the tnc closer to the edge in a build up of packet viruses.
>
>Yes i rest my tnc with APRS+SA,WINPACK,WINAPRS in terminal mode well the
>reset is waste of time no way this can be cleaned,it will not be done in
>the correct way.
------------------------------
Message: 5
Date: Wed, 24 Jan 2007 07:22:30 +1000
From: "Andrew Rich" <vk4tec_at_tech-software.net>
Subject: [aprssig] APRS Sateliite live panel - update
Gudday
I have re-worked my live satllite panel.
Suggestions welcome.
Shows status and packet counts of PCSAT, ANDE and RAFT.
http://vk4tec.no-ip.org/sat_panel.htm
Regards
Andrew Rich
Amateur radio callsign VK4TEC
email: vk4tec_at_tech-software.net
web: http://www.tech-software.net
Brisbane AUSTRALIA
------------------------------
Message: 6
Date: Wed, 24 Jan 2007 07:27:24 +1000
From: "Andrew Rich" <vk4tec_at_tech-software.net>
Subject: [aprssig] PCSAT tracking on APRS screens
I have a linux box running predict, which is NTP and KEP updated constantly.
I have confirmed with several satellite tracking sources that my data is
correct.
The object to look out for is "PCSAT" from "VK4TEC"
A perl script wakes up and sends the position of PCSAT once a minute.
Regards.
Andrew Rich
Amateur radio callsign VK4TEC
email: vk4tec_at_tech-software.net
web: http://www.tech-software.net
Brisbane AUSTRALIA
------------------------------
Message: 7
Date: Tue, 23 Jan 2007 17:40:31 -0400
From: "julien mervyn dedier" <julien9z4fz_at_gmail.com>
Subject: Re: [aprssig] TM-D700A MANAULS ECTS
Packet virus is when your tnc is corrupted,error,and bugs coming from the
tnc limited data is flowing my friend we call it packet virus,may be you
will say the tnc not working or you pay to get the tnc fix
On 1/23/07, Andrew Rich <vk4tec_at_tech-software.net> wrote:
>
>"aprs packet virus "
>
>Who is this jerk ?
>
>This is basic stuff.
------------------------------
Message: 8
Date: Tue, 23 Jan 2007 17:47:01 -0400
From: "julien mervyn dedier" <julien9z4fz_at_gmail.com>
Subject: [aprssig] Fwd: RE SETTING YOUR TNC
After this email you all will never make the same mistake twice hi hi,no
software weather it is UI-VIEW,APRS+SA,WINAPRS,AGWTRACKER,LINK 700,these
software cannot reset any tnc with packet virus,the various software will
show you it do the reset, still in the tnc is packet virus.
Ok look at a tnc having packet virus,no way these software in terminal
mode can fix the tnc, you put a tnc with packet virus on any one of the
software in terminal mode see if it can reset the tnc no they cannot do the
reset.
The only true and correct reset is via HYPER TERMINAL on any windows
95/98/2000/ME/XP
This is the only way to clean and remove packet virus from any tnc,this is
base on experience and doing it time and time again.
While in hyper terminal you can do packet,chat mode,you can go into your
friend mail box drop him a mail,console mode packet chat hi all this you can
do while still doing aprs,we will need how for the tm-d700a to cooperate
with the th-d7 hand held radio,it is called the mail box cooperation
between 700a and d7 hi hi very important issue base on d7 limitation in the
tnc.
A big question the tnc mail box while in aprs you have 15 SSID in the
tm-d700a mail box you need to give it a call as show in previous email all
mail box carry SSID-1, this can be discuss when we start to program the tnc
..
A next big problem hi fellows hams all of you who are running the radios in
TNC PKT mode fellows you are actually running the radio in tnc mode,yes but
Julien I am running it with UI-view in kiss mode, yes my friend even in kiss
mode you tnc need to be set right so guy how do you fix it that is the
entire ham community problem we all have to play our part,and get it
corrected.
Running the TNC PKT mode with any software in kiss mode you still have the
radio in tnc ,the tnc parameter need to be adjusted these radios are real
special radios very and nice,so care must be maintain.
BELOW IS THE INFORMATION ON HOW TO RESET THE TNC THE PROPPER WAY,FULL RESET
FROM THE CONSOLE IS NOT.
**
Setting up HyperTerminal to work with your TH-D7A, TH-D7AG.,TM-D700A
1 Select Hyper Terminal from the Start Menu in Windows 95/98/2000/ME/XP
2 Click on Start
3 Click on Programs
4 Click on Accessories
4 Click on Communications
5 Click on HyperTerminal in the NAME box filled it in, and now
scroll across to the ICON
( phone with the red, green, blue circles ) and click OK.
6 Next screen is Connect TO, click OK
7 Com port properties screen will appear filled in the information
below
Bits Per Second 9600
Data Bits 8
Parity None
Stop Bits 1
Flow Control None
8 Make the following selections in the appropriate box. Once you
have made all of the selections click OK on both screens.
9 " VERY IMPORTANT STEP "
A. Click on FILE at the top of the Hyperterminal screen
B Click on PROPERTIES
C. Click SETTINGS
D. Click ASCII SETTINGS
E. Check the Echo Typed Characters Locally box, now click OK, click
OK again on the next window
F. Now hit return and you should see now see in the hyperterminal
screen CMD:
Instruction to operate packet with HyperTerminal..
Click Start
Click Programs
Click Accessories
Click on Communications
Click on HyperTerminal, you may name your HyperTerminal folder
Enter mycall WD6DX (example)-return,
Adjust the Baud Rate to the same as the station your are sending packet
to by typing hb 9600-return (example). To connect to another station
type after cmd: c KJ6DX (example) and then return. The TM-D700A will
start sending packet burst, if it does not connect, it will show on the
HyperTerminal screen Disconnected Time Out.
Instruction to operate packet with HyperTerminal..
Click Start
Click Programs
Click Accessories
Click on Communications
Click on HyperTerminal, you may name your HyperTerminal folder
Enter mycall WD6DX (example)-return,
Adjust the Baud Rate to the same as the station your are sending packet
to by typing hb 9600-return (example). To connect to another station
type after cmd: c KJ6DX (example) and then return. The TH-D7A, or
TH-D7A(G) will start sending packet burst, if it does not connect, it
will show on the HyperTerminal screen Disconnected Time Out.
The built-in TNC in the TH-D7A, or TH-D7A(G)is a very simple. Its
primary function is used for the DX Packet Cluster, and Kenwood Sky
Command. Its function is very limited, and does not support full duplex,
and PSK. It only has the hardware flow, and not transparent mode. It
does not send binary files.
------------------------------------
TH-D7A, AG / TM-D700A TNC reset.
A) Start Hyperterminal from Windows and set it for the correct port and at
same speed as set for access in packet, while PC is connected to TH-D7A,
AG/ TM-D700A via the PC connection on the side of the TH-D7A, AG./
TM-D700A
B) Turn on Packet Mode in the TH-D7A, AG / TM-D700A by pressing the TNC
Button for about 1 second and then you see TNC PACKET in the top left
corner of the TH-D7A, AG display TNC parameters should now be accessible.
C) Perform a TNC RESET command via the hyperterminal screen (i.e. type
RESET). THIS IS NECESSARY BECAUSE THE TH-D7A, AG TM-D700A NEVER RESETs THE
TNC, NOT EVEN DURING A FULL RADIO RESET.
-----------------------------------
THANKS
JULIEN
9Z4FZ//TRINIDSA & TOBAGO.
M0JDD//UNITED KINGDOM.
M0JDD/J3//GRENADA.
------------------------------
Read previous mail | Read next mail
| |
