| |
ZL3AI > APRDIG 29.10.06 05:58l 113 Lines 3340 Bytes #999 (0) @ WW
BID : 8906-ZL3AI
Read: GUEST
Subj: [APRSSIG] Vol 28 #16, 1/1
Path: DB0FHN<DB0RGB<DB0SL<DB0FSG<DB0PV<OE5XBL<OE2XUM<OE5XBR<OE1XAB<HG8LXL<
7M3TJZ<ON0AR<GB7FCR<ZL2BAU
Sent: 061029/0424Z @:ZL2BAU.#87.NZL.OC #:11946 [Waimate] $:8906-ZL3AI
From: ZL3AI@ZL2BAU.#87.NZL.OC
To : APRDIG@WW
Today's Topics:
1. RE: 145.39 quartz crystal? (Ian)
2. RE: 145.39 quartz crystal? (Art)
3. TH-D7 and Megellan Meridian Color... (Jeffrey P. Nast)
4. RE: TH-D7 and Megellan Meridian Color... (Ray McKnight)
----------------------------------------------------------------------
Message: 1
Date: Sun, 15 Oct 2006 20:25:52 -0400
From: "Ian" <ik7565_at_verizon.net>
Subject: RE: [aprssig] 145.39 quartz crystal?
145.39 or 144.39? 73, Ian N8IK
-----Original Message-----
>Any ideas where to obtain reasonably priced quartz crystals to
>transmit on 145.39?
------------------------------
Message: 2
Date: Sun, 15 Oct 2006 21:37:21 -0400
From: Art <KY1K_at_verizon.net>
Subject: RE: [aprssig] 145.39 quartz crystal?
x-avg-checked=avg-ok-ED04F5E
Yes, thanks Ian.
I meant 144.39, sorry.
Art
At 08:25 PM 10/15/2006, you wrote:
>145.39 or 144.39? 73, Ian N8IK
------------------------------
Message: 3
Date: Sun, 15 Oct 2006 23:13:09 -0500
From: "Jeffrey P. Nast" <jpnast_at_frontiernet.net>
Subject: [aprssig] TH-D7 and Megellan Meridian Color...
After our local club meeting last week I had a gent ask me to help him
set up his GPS to work on his D7. I tried some combinations of the setup
to no avail. I didn't spend too much time on it because it was snowing
that evening and I wanted to get home before it got worse. I told him
I'd do some further research, but I'm not coming up with much. Perhaps
there is someone else out there with this setup:
* Kenwood TH-D7
- NMEA96
* Megellan Meridian Color GPS
- NMEA Options:
o v1.5 APA
o v1.5 XTE
o v2.1 GSA
- Speed
o 9600
Which one of the NMEA should I use? Since he is using a gender bender
between the radio and GPS, I'm not sure if his serial cable is correct
either. I'm hoping to be able to at least have the correct options
selected before looking at his serial cable. Or is this GPS incompatible
with the D7?
Thank you!
-Jeff Nast
KC0MKS
------------------------------
Message: 4
Date: Sun, 15 Oct 2006 22:25:03 -0700
From: "Ray McKnight" <shortsheep_at_worldnet.att.net>
Subject: RE: [aprssig] TH-D7 and Megellan Meridian Color...
Turn GPS OFF. Connect serial cable.
Open up a Hyperterminal session.
(assuming you're running Winderz, if not use any comms program you have).
In Hperterminal select the appropriate comm port, then 4800-N-8-1 then NONE
for handshaking. Then click the CALL button (picture of phone on hook).
THEN, turn GPS on.
GPS serial is *generally* 4800bps, but it's possible
His GPS is set to 9600. If you can see the data stream
From the GPS then it's communicating properly and the cable Is fine. If
the characters are jibberish then it's a speed Or parity mismatch. Try
different port speed settings first, Leave the other settings alone.
Last resort, reset GPS to restore the default settings, Then find the
manual online and see what those settings are. Then set Hyperterminal to
that and verify the comm. Port is okay.
Or use last resort method FIRST to save time if you are good at
Research. After you verify data coming out of the GPS properly
Then set GPS to what the D7 needs and it should work.
------------------------------
aprssig mailing list
aprssig_at_lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
End of aprssig Digest, Vol 28, Issue 16
Read previous mail | Read next mail
| |
