OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
G0VSS  > AMTOR    08.11.97 19:28l 58 Lines 1882 Bytes #-10604 (0) @ EU.#7
BID : 0A0345G0VSS
Read: DC0VD GUEST
Subj: AMTOR HELP PLEASE
Path: DB0ZDF<DB0HOM<DB0RBS<DB0LX<DB0ZKA<DB0KCP<HB9OS<HB9H<HB9OK<IW2FPO<
      IK2QCA<I3NXU<IW3HHD<I4UKI<I4FP<I4UJB<I4UJB<GB7PLY<GB7IPN<GB7TJF
Sent: 971105/2145Z @:GB7TJF.#45.GBR.EU #:44456 [Taunton] FBB7.00d $:0A0345G0VSS
From: G0VSS@GB7TJF.#45.GBR.EU
To  : AMTOR@EU


Hello and Thanks for reading this message.

My name is Ray and QTH Cheddar in Somerset.

I have been operating Amtor for about a month and I am experiencing a
problem with ARQ. I cannot raise or call anyone in ARQ mode, although
other amateurs have no problem in linking to me.

I am using an FT767GX and in tests with other amateurs it appears that my
receive delay is too long. That is the switching between TX and RX is not
short enough for the receiver to recover to RX .. I can only hear a very
small part of the answer back tones when calling in ARQ. 

I am using the Rig with a Hamfax interface together with Hamcomm 3.1
s/ware.
My PC is a Toshiba 1800 Notebook.
The connections to the rig are to the appropriate ports on the back of the
rig, including the AF out from the rig to the comparator unit (Constant
level audio).
Gnd connected to the Gnd on AF out Gnd.
PTT
Patch in (For the audio input).


The following have all been checked:
Checked and removed any other memory resident software.
Upgraded from Hamcomm 3.0 to 3.1 Software.
Checked the selcall for ARQ transmission (the right selcall).
Checked and calibrated the timing on the PC clock.
Using the AGC on FAST.
The delay and trip for the tx has been checked are on min (But only used
on VOX anyway)
VOX is not used.
TX / RX freq checked by other Amtor users and OK.

I believe that with the help from other amateurs, I have narrowed it down
to the recovery rate / time on RX. 

I would however be very interested in any help or comments which I may
have missed and in particular anyone with experience of using the FT767GX
in the Amtor Mode.

I can use RTTY, FEC and ARQ as a slave - but not as the master.

I look forward to your comments.



73 - Ray, G0VSS @ GB7TJF, (QTH - Cheddar, Somerset)

Message timed: 21:37 on 05 Nov 97
Message sent using WinPack V6.1


Read previous mail | Read next mail


 21.11.2026 19:21:02lGo back Go up