| |
CX2SA > SATDIG 17.07.05 08:51l 138 Lines 4964 Bytes #999 (0) @ WW
BID : 11790_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #794 1/1
Path: DB0FHN<DB0MRW<DB0WUE<DK0WUE<F5GI<F6KMO<HR1FBB<CX2SA
Sent: 050717/0737Z @:CX2SA.LAV.URY.SA #:11790 [Minas] FBB7.00e $:11790_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
AMSAT-BB-digest Sunday, July 17 2005 Volume 2004 : Number 794
In this issue:
1: Re: [amsat-bb] photo request
2: [amsat-bb] Re: P3e Mode-UV flight model ready at AMSAT-DL
----------------------------------------------------------------------
Message: 1
Date: Sat, 16 Jul 2005 23:05:50 -0400
From: "Gould Smith" <gouldsmi@bellsouth.net>
Subject: Re: [amsat-bb] photo request
Hi Drew,
This isn't what you asked for, but thought you might want them anyway.
Gould
- ----- Original Message -----
From: "Andrew Glasbrenner" <glasbrenner@mindspring.com>
To: <amsat-bb@amsat.org>
Sent: Saturday, July 16, 2005 7:48 PM
Subject: [amsat-bb] photo request
>I am looking for a photo from Dayton, specifically from the AO-51 V/S pass
>where W2GPS, W5DID, and others made contacts using my FT-470 and long
>rubber duck antenna for the uplink. If anyone has a picture of this, or
>someone using a whip antenna to uplink on a V/S pass, please send it to me
>ASAP for inclusion in a article. Of course I'll credit the photographer.
>
> Thanks a bunch!
>
> 73, Drew KO4MA ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
[demime 1.01d removed an attachment of type image/jpeg which had a name of
Spring 05 148.jpg]
[demime 1.01d removed an attachment of type image/jpeg which had a name of
Spring 05 149.jpg]
[demime 1.01d removed an attachment of type image/jpeg which had a name of
Spring 05 150.jpg]
[demime 1.01d removed an attachment of type image/jpeg which had a name of
Spring 05 141.jpg]
[demime 1.01d removed an attachment of type image/jpeg which had a name of
Spring 05 145.jpg]
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 2
Date: Sun, 17 Jul 2005 06:27:13 +0000
From: "Gabriel Medinas" <gmedinas@hotmail.com>
Subject: [amsat-bb] Re: P3e Mode-UV flight model ready at AMSAT-DL
Hello William, congratulations for your work in P3E, I sure many others
"ham-sats" and we in AMSAT-YV hope this satellite will work to enjoy
it.....good work and make sure this is for a good purpose, P3E the only
early hope in high orbit ham-radio satellite that I see now....and we need
it!.
73, Gabriel Medinas YV5KXE
AMSAT-YV Secretary
www.amsat-yv.org
> > Hi AMSATs,
> >
> > I always like to inform the AMSATs public about my P3e work, but
> > unfortunatly due to
> > some reasons there was not much time and nothing much to say...
> >
> > However, now I am happy to announce that the my MODE-UV transponder
> > design for P3e is ready at the P3e integration place in Marburg
> > (Germany). About 4 weeks ago I was in Marburg before, where the
> > transponder has been checked. Unfortunatly some unsure things were
> > found in the design. The unsure things were about long term stability
> > after many years in space.
> >
> > At home in The Netherlands, I changed the design with some minor
> > changes to have a secure long term stability. Finally I tested the
> > transponder again and it performed well within the specifications.
> > Again something learned for future transponder designs :o)
> >
> > Last Wednesday I drove to AMSAT-DL P3e integrations place in Marburg
> > again, and have my transponder again checked. In the beginning it
> > seemed that the 70cm receiver lost 10dB in sensetivity. After some
> > more measurements we find out that it was due to a bad attenuator we
> > used for protection at the input.
> >
> > Together with Karl Meinzer we looked for any problems, but so far we
> > could see (without HELAPS) all was okay. In the afternoon I went back
> > home again, this time without the MODE-UV.
> >
> > Now the MODE-UV will get a new home, the home of P3e... :o)
> > I hope the transponder will work like its elder sister in AO-10, and
> > you all will enjoy it for many years...
> >
> > It was lots of work to get it this far, but I know it is for a good
> > purpose...
> >
> > 73
> > William Leijenaar (PE1RAH)
> >
> > * Developer of the Dutch transponder on the Indian HAMSAT
> > * Developer of the AMSAT-DL P3e Mode-UV transponder......
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
End of AMSAT-BB-digest V2004 #794
*********************************
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the authors.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb-digest" to Majordomo@amsat.org
Read previous mail | Read next mail
| |