| |
CX2SA > SATDIG 17.07.05 06:29l 225 Lines 7861 Bytes #999 (0) @ WW
BID : 11742_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #793 7/7
Path: DB0FHN<DB0MRW<DB0WUE<DK0WUE<SP7MGD<7M3TJZ<HG8LXL<CX2SA
Sent: 050717/0457Z @:CX2SA.LAV.URY.SA #:11742 [Minas] FBB7.00e $:11742_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Message: 21
Date: Sat, 16 Jul 2005 19:41:32 -0400
From: "Andrew Glasbrenner" <glasbrenner@mindspring.com>
Subject: Re: [amsat-bb] Active satellite operators in Antarctica
There were a few hams active on AO-40 from the Fuji stations that Japan has
in Antartica. Not sure if they are still there. 8J1RF was one I think. Might
ask someone in JA as not many of them read the -bb I think....
If they were on 40 they should have the right radio and antenna at least.
73, Drew KO4MA
- ----- Original Message -----
From: "Graham Shirville" <g.shirville@btinternet.com>
To: <amsat-bb@amsat.org>
Cc: "G4DDK Sam Jewell" <jewell@btinternet.com>; <hlong@btinternet.com>;
<G0MRF@aol.com>; "Jason Flynn" <flynnjs@yahoo.com>
Sent: Saturday, July 16, 2005 2:24 PM
Subject: [amsat-bb] Active satellite operators in Antarctica
> This is a request to find out if there are currently any active satellite
> stations in Antarctica!
>
> The upcoming SSETI Express launch on August 25th will place the satellite
> in
> a sun synchronous orbit. Taking into account the time for the satellite to
> separate from the launch adaptor and an in built system delay before the
> computer and radio equipment is activated - it should start to transmit on
> 437.250MHz at approx 08:40 UTC on August 25th. (the exact timing is
> subject
> to final verification!)
>
> The output power is 3 watts so should just be detectable even with a
> handheld UHF FM radio
>
> Our slight problem is that at this time it will be overhead Antarctica....
> and we have always been promoting the worldwide nature of the amateur
> satellite groundstation "network"
>
> So if you are or know of such a station can you please get in touch with
> me
> ASAP.
>
> It is intended that a few weeks after launch, when the main on board
> experiments have been completed, the satellite will be commanded into
> transponder mode - A single channel U/S FM transponder. Although this may
> not be the most exciting sort of transponder device it has not cost
> AMSAT-UK
> much in the way of funds so we should be happy!
>
> There is a of course a unique prize for the first valid reception report
> but
> the main value will be to help us impress the European Space Agency with
> our
> facilities so that they may consider allowing us to put more (linear?)
> transponders on their future GTO missions....
>
> More details of the full SSETI Express launch programme and telemetry
> formats etc will be made available within the next few weeks on the
> www.sseti.net website
>
> Thanks in advance for your assistance
>
>
> 73
>
> Graham G3VZV
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 22
Date: Sat, 16 Jul 2005 19:48:39 -0400
From: "Andrew Glasbrenner" <glasbrenner@mindspring.com>
Subject: [amsat-bb] photo request
I am looking for a photo from Dayton, specifically from the AO-51 V/S pass
where W2GPS, W5DID, and others made contacts using my FT-470 and long rubber
duck antenna for the uplink. If anyone has a picture of this, or someone
using a whip antenna to uplink on a V/S pass, please send it to me ASAP for
inclusion in a article. Of course I'll credit the photographer.
Thanks a bunch!
73, Drew KO4MA
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 23
Date: Sat, 16 Jul 2005 13:04:07 -0700
From: Dave Guimont <dguimon1@san.rr.com>
Subject: Re: [amsat-bb] P3e Mode-UV flight model ready at AMSAT-DL
>Now the MODE-UV will get a new home, the home of P3e... :o)
>I hope the transponder will work like its elder sister in AO-10, and you
>all will enjoy it for many years...
>
>It was lots of work to get it this far, but I know it is for a good purpose...
Congratulations, William!!! Always nice to hear anything about P3E, and
there are hundreds of us out here that will enjoy it MORE than we did on AO10.
Especially in view of most of the trivia ( or downright information? in
error!) on here most of the time, with respect to radio amateur satellites!!!
73, Dave wb6llo@amsat.org
Disagree: I learn....
Pulling for P3E...
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 24
Date: Sat, 16 Jul 2005 15:42:08 -0800
From: "Edward R. Cole" <al7eb@acsalaska.net>
Subject: Re: [amsat-bb] NO-44 Link Question
At 02:23 PM 7/16/2005 -0800, Edward R. Cole wrote:
>At 04:07 PM 7/16/2005 -0400, Anthony Monteiro wrote:
>>At 10:02 AM 7/16/2005 -0700, Greg D. wrote:
>>
>>>Hi Matt,
>>>
>>>I have an FT-736R, but I expect the same technique can be used with nearly
>>>any rig. The fact that you are working a satellite doesn't necessarily
>>>mean that you need to use the satellite mode in the radio. For same-band
>>>operation, such as with ISS or PCSat, the satelilte software can use
>>>traditional (Earth-bound) FM repeater mode. It programs the repeater
>>>offset for -2 times the amount of doppler, and sets the receive frequency
>>>for the downlink plus doppler. Then when you transmit, the rig instantly
>>>and automatically shifts the right amount to land on the uplink frequency.
>>>
>>>FODTrack can handle this, and I expect there are others.
>>>
>>>73s,
>>>
>>>Greg KO6TH
>>
>>Hi Guys,
>>
>>Unfortunately, this does not work on an FT-847 as
>>the CAT interface ignores the digits less than 10KHz
>>for the repeater offset which is too big a step for
>>Doppler compensation.
>>
>>You are better off using a half-duplex radio like
>>the FT-817, FT-857 or FT-100 if you have one as they will
>>work in "same-band" operation with the CAT interface,
>>
>>73,
>>Tony AA2TX
>>----
>
>The FT-847 will work in split mode:
>1. Press VFO/M button to get VFOa
>2. Dial your Rx freq with the VFO
>3. Transfer this to VFOb by pressing the VFO/M button.
###oops: I meant press the a->b button to transfer the freq. to VFOb.
>4. Now dial in your Tx freq.
>5. Press the split button
>6. VFOa = Tx, VFOb = Rx
>tune Tx with main VFO knob
>tune Rx with subtune knob.
>
>73's,
>Ed - KL7UW
>===================================
>BP40iq, Nikiski, AK http://www.qsl.net/al7eb
>Amsat #3212
>Modes: V - U - L - S
>===================================
>----
>Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
>Not an AMSAT member? Join now to support the amateur satellite program!
>To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>
73's,
Ed - KL7UW
=================================
http://www.qsl.net/al7eb
144-MHz EME - BP40iq:
FT-847, mgf-1801/1402, 4xM2-xpol-20, 170w
=================================
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
End of AMSAT-BB-digest V2004 #793
*********************************
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the authors.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb-digest" to Majordomo@amsat.org
Read previous mail | Read next mail
| |