| |
CX2SA > SATDIG 17.07.05 06:13l 196 Lines 6541 Bytes #999 (0) @ WW
BID : 11734_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #793 2/7
Path: DB0FHN<DB0FOR<DB0SIF<DB0EA<DB0RES<ON0BEL<IZ0AWG<IW8PGT<CX2SA
Sent: 050717/0457Z @:CX2SA.LAV.URY.SA #:11734 [Minas] FBB7.00e $:11734_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Message: 3
Date: Sat, 16 Jul 2005 21:11:45 +0800
From: Keith Bainbridge <vk6xh@arach.net.au>
Subject: Re: [amsat-bb] P3e Mode-UV flight model ready at AMSAT-DL
Once again congrats William, we are all waiting for P3E, some of us down
under are desperate to contact the world on the sats !!!
keep up the good work
73 de Keith VK6XH
William Leijenaar wrote:
> Hi AMSATs,
>
> I always like to inform the AMSATs public about my P3e work, but
> unfortunatly due to
> some reasons there was not much time and nothing much to say...
>
> However, now I am happy to announce that the my MODE-UV transponder
> design for P3e is ready at the P3e integration place in Marburg
> (Germany). About 4 weeks ago I was in Marburg before, where the
> transponder has been checked. Unfortunatly some unsure things were
> found in the design. The unsure things were about long term stability
> after many years in space.
>
> At home in The Netherlands, I changed the design with some minor
> changes to have a secure long term stability. Finally I tested the
> transponder again and it performed well within the specifications.
> Again something learned for future transponder designs :o)
>
> Last Wednesday I drove to AMSAT-DL P3e integrations place in Marburg
> again, and have my transponder again checked. In the beginning it
> seemed that the 70cm receiver lost 10dB in sensetivity. After some
> more measurements we find out that it was due to a bad attenuator we
> used for protection at the input.
>
> Together with Karl Meinzer we looked for any problems, but so far we
> could see (without HELAPS) all was okay. In the afternoon I went back
> home again, this time without the MODE-UV.
>
> Now the MODE-UV will get a new home, the home of P3e... :o)
> I hope the transponder will work like its elder sister in AO-10, and
> you all will enjoy it for many years...
>
> It was lots of work to get it this far, but I know it is for a good
> purpose...
>
> 73
> William Leijenaar (PE1RAH)
>
> * Developer of the Dutch transponder on the Indian HAMSAT
> * Developer of the AMSAT-DL P3e Mode-UV transponder......
> ----
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>
>
- --
Keith Bainbridge
VK6XH
N.C.R.G ( VK6ANC )
Amsat NA #35338
W.I.A.
ex G6HHV, G0HEI, G1GHZ and VK6BRK
You're just jealous because the voices only talk to me!
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 4
Date: Sat, 16 Jul 2005 10:38:51 -0400
From: Andythomas <70374.440@compuserve.com>
Subject: [amsat-bb] EA6/G0SFJ soon
Hi
just to announce that I will be on SO-50 (and possibly AO-51) from a beach
in Mallorca, EA6, between 26 and 31 July 2005, (family circumstances
permitting!)
Look for me on the pass with the highest elevation for me, mostly in the
mornings.
Locator to be announced when I get there!
Rig is a FT-51R with 5 Watts (new battery) and an Arrow.
On testing I notice that the rx duplex is not very good, compared to the
Kenwood THD7E, but I still get good tx audio reports.
QSL via G0SFJ (address in callbook or QRZ.com) or via RSGB bureau. SWL
reports always welcomed - quote locator and time.
This follows other successful mini-dxpeditions to TK, SV8, YL and F. Look
out for LZ in the spring of next year!
73 de andy, G0SFJ or as I shall be, EA6/G0SFJ
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 5
Date: Sat, 16 Jul 2005 15:51:18 +0200
From: "i8cvs" <domenico.i8cvs@tin.it>
Subject: Re: [amsat-bb] P3e Mode-UV flight model ready at AMSAT-DL
----- Original Message -----
From: "William Leijenaar" <pe1rah@hotmail.com>
To: <amsat-bb@amsat.org>
Sent: Saturday, July 16, 2005 2:31 PM
Subject: [amsat-bb] P3e Mode-UV flight model ready at AMSAT-DL
> Hi AMSATs,
>
> I always like to inform the AMSATs public about my P3e work, but
> unfortunatly due to
> some reasons there was not much time and nothing much to say...
>
> However, now I am happy to announce that the my MODE-UV transponder design
> for P3e is ready at the P3e integration place in Marburg (Germany). About
4
> weeks ago I was in Marburg before, where the transponder has been checked.
> Unfortunatly some unsure things were found in the design. The unsure
things
> were about long term stability after many years in space.
>
> At home in The Netherlands, I changed the design with some minor changes
to
> have a secure long term stability. Finally I tested the transponder again
> and it performed well within the specifications. Again something learned
for
> future transponder designs :o)
>
> Last Wednesday I drove to AMSAT-DL P3e integrations place in Marburg
again,
> and have my transponder again checked. In the beginning it seemed that the
> 70cm receiver lost 10dB in sensetivity. After some more measurements we
find
> out that it was due to a bad attenuator we used for protection at the
input.
>
> Together with Karl Meinzer we looked for any problems, but so far we could
> see (without HELAPS) all was okay. In the afternoon I went back home
again,
> this time without the MODE-UV.
>
> Now the MODE-UV will get a new home, the home of P3e... :o)
> I hope the transponder will work like its elder sister in AO-10, and you
all
> will enjoy it for many years...
>
> It was lots of work to get it this far, but I know it is for a good
> purpose...
>
> 73
> William Leijenaar (PE1RAH)
>
> * Developer of the Dutch transponder on the Indian HAMSAT
> * Developer of the AMSAT-DL P3e Mode-UV transponder......
> ----
Hi William, PE1RAH
Tanks for the above information.
Do you build the HELAPS as well ?
It would be very interesting to get a block diagram and not only pictures
of the UV transponder with his technical specifications in the AMSAT-DL
site.
Have a nice job
73" de
i8CVS Domenico
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
Read previous mail | Read next mail
| |