| |
CX2SA > SATDIG 17.07.05 06:13l 173 Lines 5489 Bytes #999 (0) @ WW
BID : 11735_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #793 3/7
Path: DB0FHN<DB0MRW<DB0FOR<DB0SIF<DB0EA<DB0RES<ON0BEL<IZ0AWG<IW8PGT<CX2SA
Sent: 050717/0457Z @:CX2SA.LAV.URY.SA #:11735 [Minas] FBB7.00e $:11735_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Message: 6
Date: Sat, 16 Jul 2005 09:10:33 -0700 (PDT)
From: Matt Bennett <kaisermuche@yahoo.com>
Subject: Re: [amsat-bb] NO-44 Link Question
Charles,
Thanks for the reply. I understand that PCSat is a
digipeater, but I'm wondering how to get around
Doppler, not how to listen to the downlink while
transmitting. At any given moment, the transceiver
will be tuned to receive the downlink signal, but must
be prepared to transmit at a different frequency as
soon as the TNC keys the PTT. Example: With PCSat
approaching, the downlink will be 145.827 +Doppler,
and uplink will be 145.827 -Doppler. The transceiver
must instantaneously switch to the uplink frequency
when keyed up by the TNC, or else the transceiver will
transmit the signal on a frequency too high for that
sat to hear. The 847 won't allow same-band ops or
split frequency offset in sat mode, so how does one
accomplish this with this rig? Am I still missing
something?
Thanks for the help all,
Matt
KF6RTB
- --- Charles R Reiche <charlieray@optonline.net> wrote:
> This satellite is only a digital repeater, it has no
> voice function. It
> works just like a digipeater.
> ----- Original Message -----
> From: "Matt Bennett" <kaisermuche@yahoo.com>
> To: <amsat-bb@amsat.org>
> Sent: Friday, July 15, 2005 9:59 PM
> Subject: [amsat-bb] NO-44 Link Question
>
>
> > I was looking at PCSat's link scheme, and noticed
> it
> > shared both uplink and downlink on 145.827 FM
> (when
> > not using the APRS downlink). How does one go
> about
> > operating this sat w/ an FT-847 if the 847 won't
> > operate Sat mode on the same band? Is there a
> trick
> > around this, or are two radios needed to operate
> this
> > sat?
> >
> > Thanks,
> >
> > Matt
> > KF6RTB
> >
> > Matt Bennett
> > KF6RTB
> > UCISAT Communications Team Member
> > University of California, Irvine
> > www.ucisat.net
> >
> >
> >
> >
> ____________________________________________________
> > Start your day with Yahoo! - make it your home
> page
> > http://www.yahoo.com/r/hs
> > ----
> > Sent via amsat-bb@amsat.org. Opinions expressed
> are those of the author.
> > Not an AMSAT member? Join now to support the
> amateur satellite program!
> > To unsubscribe, send "unsubscribe amsat-bb" to
> Majordomo@amsat.org
>
>
Matt Bennett
KF6RTB
UCISAT Communications Team Member
University of California, Irvine
www.ucisat.net
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 7
Date: Sat, 16 Jul 2005 09:57:40 -0400 (EDT)
From: n4qwf@ntelos.net
Subject: [amsat-bb] The great FO-29 still going strong
Last evening I had a AOS to LOS qso with WI2W. FO-29 came up at 01:17z
here in FM07 and I found WI2W and we chatted until 01:33z. The satellite
was at 2 degrees elevation when I finally heard him start to crackle a
bit. What a great QSO! To think that I watched this bird launch back in
1996 and it is still working so well is a real thrill. I believe I still
have the video. I might just look for it and watch it again. Boy do I love
this satellite stuff! Look for you all up there. 73's << John
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 8
Date: Sat, 16 Jul 2005 10:02:56 -0700
From: "Greg D." <ko6th_greg@hotmail.com>
Subject: Re: [amsat-bb] NO-44 Link Question
Hi Matt,
I have an FT-736R, but I expect the same technique can be used with nearly
any rig. The fact that you are working a satellite doesn't necessarily mean
that you need to use the satellite mode in the radio. For same-band
operation, such as with ISS or PCSat, the satelilte software can use
traditional (Earth-bound) FM repeater mode. It programs the repeater offset
for -2 times the amount of doppler, and sets the receive frequency for the
downlink plus doppler. Then when you transmit, the rig instantly and
automatically shifts the right amount to land on the uplink frequency.
FODTrack can handle this, and I expect there are others.
73s,
Greg KO6TH
Charles,
Thanks for the reply. I understand that PCSat is a
digipeater, but I'm wondering how to get around
Doppler, not how to listen to the downlink while
transmitting. At any given moment, the transceiver
will be tuned to receive the downlink signal, but must
be prepared to transmit at a different frequency as
soon as the TNC keys the PTT. Example: With PCSat
approaching, the downlink will be 145.827 +Doppler,
and uplink will be 145.827 -Doppler. The transceiver
must instantaneously switch to the uplink frequency
when keyed up by the TNC, or else the transceiver will
transmit the signal on a frequency too high for that
sat to hear. The 847 won't allow same-band ops or
split frequency offset in sat mode, so how does one
accomplish this with this rig? Am I still missing
something?
Thanks for the help all,
Matt
KF6RTB
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
Read previous mail | Read next mail
| |