OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
CX2SA  > SATDIG   11.07.05 08:25l 124 Lines 4333 Bytes #999 (0) @ WW
BID : 9450_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #786 1/4
Path: DB0FHN<DB0FOR<DB0SIF<DB0EA<DB0RES<DK0WUE<I0TVL<CX2SA
Sent: 050711/0718Z @:CX2SA.LAV.URY.SA #:9450 [Minas] FBB7.00e $:9450_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To  : SATDIG@WW


AMSAT-BB-digest        Monday, July 11 2005        Volume 2004 : Number 786

In this issue:

    1: Re: [amsat-bb] rotor problems
    2: Re: [amsat-bb] rotor problems
    3: [amsat-bb] Free 3D CAD software
    4: [amsat-bb] AO-51 July 10
    5: Re: [amsat-bb] rotor problems
    6: Re: [amsat-bb] Free 3D CAD software
    7: [amsat-bb] Glacier-Waterton Hamfest
    8: [amsat-bb] Glacier-Waterton Hamfest
    9: [amsat-bb] eBay item 5788314015 (Ends Jul-16-05 12:09:11 PDT) -
       "S" band helix feed for dish
    10: [amsat-bb] VO-52
    11: [amsat-bb] 9m?? helix
    12: [amsat-bb] Shuttle launch
    13: Re: [amsat-bb] Shuttle launch

----------------------------------------------------------------------

Message: 1
Date: Sun, 10 Jul 2005 10:34:48 +0200
From: "Erich Eichmann" <erich.eichmann@t-online.de>
Subject: Re: [amsat-bb] rotor problems

Hello Jim,
yesterday George, LX1BB, and I had the opportunity to test a AlfaSpid Az/El
rotor with SatPC32 + ServerSDX (the SatPC32 driver file for GS-232
compatible controllers).
That  worked flawlessly with the Yaesu emulation of the firmware. We had to
set the baudrate to 600, however,  not 1200 as said in the older
versions of the AlfaSpid manual.
vy 73s, Erich, DK1TB

- ----- Original Message ----- 
From: "Jim Randall" <jrand1@erols.com>
To: <amsat-bb@amsat.org>
Sent: Sunday, March 13, 2005 8:35 PM
Subject: [amsat-bb] rotor problems


> Has anyone been able to get SatPC32 and Alfa Spid AzEl rotators to work?>
> 73 N3YDT
> Jim Randall
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
> Not an AMSAT member? Join now to support the amateur satellite program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

------------------------------

Message: 2
Date: Sun, 10 Jul 2005 03:12:39 -0600
From: Freeman Pascal <pascal@pascal.org>
Subject: Re: [amsat-bb] rotor problems

I have an Alphaspid az rotor that I purchased for my HF tower  
project.  Since it was idle during field day I decided to use it with  
my field day satellite setup.  After all the good things I heard and  
read about the Alphaspid, I was horrified to discover that the wire  
terminals used to connect the controller to the control cable were of  
the flimsiest quality, the tabs were literally popping out  - Radio  
Shack puts out better quality parts.  We literally had to tape the  
control cable to the outside of the controller case with duct tape to  
keep the cable in place and allow the terminals to make contact - ugh!

Please tell me that the terminals on your AZ/EL rotor controller were  
of better quality.


- -Freeman, N5FPP

On Jul 10, 2005, at 2:34 AM, Erich Eichmann wrote:

> Hello Jim,
> yesterday George, LX1BB, and I had the opportunity to test a  
> AlfaSpid Az/El
> rotor with SatPC32 + ServerSDX (the SatPC32 driver file for GS-232
> compatible controllers).
> That  worked flawlessly with the Yaesu emulation of the firmware.  
> We had to
> set the baudrate to 600, however,  not 1200 as said in the older
> versions of the AlfaSpid manual.
> vy 73s, Erich, DK1TB
>
> ----- Original Message -----
> From: "Jim Randall" <jrand1@erols.com>
> To: <amsat-bb@amsat.org>
> Sent: Sunday, March 13, 2005 8:35 PM
> Subject: [amsat-bb] rotor problems
>
>
>
>> Has anyone been able to get SatPC32 and Alfa Spid AzEl rotators to  
>> work?>
>> 73 N3YDT
>> Jim Randall
>> ----
>> Sent via amsat-bb@amsat.org. Opinions expressed are those of the  
>> author.
>> Not an AMSAT member? Join now to support the amateur satellite  
>> program!
>> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>>
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the  
> author.
> Not an AMSAT member? Join now to support the amateur satellite  
> program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org


Read previous mail | Read next mail


 17.11.2026 08:44:40lGo back Go up